Subscribe to Our Youtube Channel
Related Manuals for Schwaiger SAT-Finder HD SF9002
Summary of Contents for Schwaiger SAT-Finder HD SF9002
-
Page 1: Sat Finder
FINDER SAT Finder SAT Finder OPERATING INSTRUCTIONS SF9002 SAT fi nder HD for 18 satellite positions... -
Page 2: Table Of Contents
Content Getting started 1.1 Package content ........3 1.2 Safety instructions . -
Page 3: Getting Started
1. GettInG starteD 1.1 Package content » SAT-Finder HD » Connection cable 1 m » Power Supply 12V DC / 2A » Car charging cable 12V DC » BNC Adaptor » Mini USB cable 1 m » Carrying strap » Quick reference guide (14 languages) »... -
Page 4: Safety Instructions
1.2 safety instructions Before you use the unit the first time, read and follow the safety instructions carefully! Be sure to think of your own safety when setting up your system (slippery roof, risk of falling). Do not use the SAT-Finder HD if there is visible damage to the unit or the connecting cables. -
Page 5: Connecting The Sat-Finder Hd
LNB outputs so that the desired satellite can be identified. For other satellite positions you will see the current setting on www.schwaiger.de 1.4 start-up process Please charge before the first using the Sat-Finder HD completely. After the complete charging, the red LED will disable. -
Page 6: Searching And Finding
2. searCHInG anD FInDInG 2.1 automatic satellite search When the red Power-LED is on, the SAT-Finder is ready for use and you can align the satellite dish. It should be turned or adjusted in small steps otherwise you might easily miss a satellite, just like with analogue SAT-finders. Vertical prepositioning of the dish makes searching easier. -
Page 7: Manual Search / Satellite Preselection
2.2 Manual search / satellite preselection Manual search allows a preselection of satellites that are located close to each other. By pressing the left ″A” button once the currently active LED will move on one step, thus selecting the next satellite. The satellites you can select are: 8°W, 7°W, 5°W and 4°W. -
Page 8: Switchable Signal Attenuation
2.4 switchable signal attenuation With strong satellite signal all LED‘s are switched on for the level and quality function of the Satfinder display. Please use the attenuator function. You can reduce the signal by -5dB or-10dB to improve the fine tunning by using the level and quality display of the Satfinder HD. -
Page 9: Satellite Position Display
3.4 satellite position display Satellite display works similarly to the display of operating/search mode, using the status ″off”, ″flashing” and ″on”, with meanings as shown in the following table: MoDe-LeD Meaning for the respective satellite „off″ „off″ The SAT-Finder HD hasn’t locked on to a transponder. -
Page 10: Appendix
Windows that carries out this task, enabling you to keep both the firmware and the satellite tables up to date at all times (or go to www.schwaiger.de). 4.2 Guarantee conditions There is a statutory guarantee of 2 years. During this period, any damage caused by manufacturing or material faults will be repaired free of charge. -
Page 11: Service-Information
4.3 service-Information At SCHWAIGER, customer satisfaction has the highest priority. Should you have any questions, suggestions or problems regarding your SCHWAIGER product, please use the contact address below. -
Page 12: Elevation Table For Europe
4.4 eLeVatIon taBLe For eUroPe Scale (C) Northern Central South Europe Europe Europe www.schwaiger.de...
Need help?
Do you have a question about the SAT-Finder HD SF9002 and is the answer not in the manual?
Questions and answers