Subscribe to Our Youtube Channel
Summary of Contents for PROVISION CCTV PRO597
- Page 1 597 USER MANUAL 2-Wire Video Intercom System Read this manual carefully before using the product, and keep it well for future use.
-
Page 3: Parts And Function
Introduction The door station is designed with high resolution color CCD camera, it pro- vides wide angle of 105 2-wire intercom system. The high white LED for night view makes the door station working efficiently at night. The front panel is made of medical stainless steel with a thickness of 2.5 mm for better protection against vandalism and cauterization. -
Page 4: Door Station Mounting
Lock Control Jumper: To select the lock type. Door Station Code DIP: Total 4 door stations can be supported. T/R+,T/R-: USB-RS485 communication terminal. Main Connect Port: To connect the bus line and the electronic locks. BUS: Connect to the bus line, non-polarity. PL: External lock power input, connect to the power positive(power +). -
Page 5: Placing Name Label
Placing Name Label Steps: 1. Use the special spanner to move 90 to loosen the screw. 2. Open the front panel. 3. Insert the name plate System Wiring and Connections Basic one-to-one Connection monitor PROS5 + PRODPS L1 L2 PL S1+ S2+ S-... -
Page 6: Multi Door Stations Connection
Multi Door Stations Connection 4# Camera 3# Camera 2# Camera 1# Camera ID=11 ID=01 ID=10 ID=00 monitors L1 L2 PL S1+ S2+ S- L1 L2 PL S1+ S2+ S- L1 L2 PL S1+ S2+ S- L1 L2 PL S1+ S2+ S- 85~260VAC DIP=on,off,off A B C D... - Page 7 With PROSDBC4 Wiring Mode monitor monitor 3 4 5 6 3 4 5 6 Impedance OFF ON switch Code=15, DIP-6=on Code=14, DIP-6=on DIP=on,off,off monitor monitor 3 4 5 6 3 4 5 6 Code=12, DIP-6=on Code=13, DIP-6=on monitor monitor 3 4 5 6 3 4 5 6 Code=3, DIP-6=on Code=2, DIP-6=on...
-
Page 8: Electric Lock Connection
Electric Lock Connection Door Lock Controlled with Internal Power Note: 1. Electronic lock of Power-on-to-unlock type should be used. 2. The door lock is limited to 12V, and holding current must be less than 250mA. 3. The door lock control is not timed from Exit Button(EB). 4. -
Page 9: Unlock Parameter Setting(Set On Monitor)
connect one lock connect two locks Take off the Jumper Take off the Jumper POWER POWER SUPPLY SUPPLY LOCK LOCK LOCK 5.2.3 Unlock parameter setting(set on monitor) H/W : a1.3 S/W: V17.11.418.00 Manual Monitor Intercom Multimedia Local addr: Monitor Unlock timing: Video standard: UI-CODE: Close... -
Page 10: Dip Switches Setting
Bit-6 is an video impedance match switch, which have to be set to ON if match the impedance, otherwise set to OFF. Bit-1~Bit-5 are used to set user code, for PRO597 door station, the user code should be set to 0~15. -
Page 11: Specification
Bit state User code Bit state User code Bit state User code code=0 code=6 code=11 3 4 5 3 4 5 3 4 5 code=1 code=7 code=12 3 4 5 3 4 5 3 4 5 code=2 code=8 code=13 3 4 5 3 4 5 3 4 5 code=3... -
Page 12: Cables Requirements
Cables Requirements The maximum distance of the wiring is limited in the CHALLENGER PRO system. Using different cables may also affect the maximum distance which the system can reach. The farest monitor monitor with two or four monitors monitor monitor PRODBC-4 PROS5 + PRODPS When Monitor quantity <... - Page 14 The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. PROVISION SECURITY PRODUCTS www.provisioncctv.com.au -V1 2013...
Need help?
Do you have a question about the PRO597 and is the answer not in the manual?
Questions and answers