1. Manuals
  2. Brands
  3. SCW Manuals
  4. IP Camera
  5. PRO SERIES
  6. User manual

SCW PRO SERIES User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SCW Support: 866-414-2553
User Manual for
the Pro series of
IP Cameras

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PRO SERIES and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SCW PRO SERIES

  • Page 1 SCW Support: 866-414-2553 User Manual for the Pro series of IP Cameras...
  • Page 3 Network  Camera  User’s  Manual Thank you for purchasing our Pro series lineup of IP Cameras. If you have any questions or requests please call us at 866-414-2553. Note: This manual covers Pro series cameras only. NOTICE: This manual may contain printing e rors, and the content is subject to change without notice.
  • Page 4 Network  Camera  User’s  Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 5 Network  Camera  User’s  Manual Safety Warnings and Cautions Please pay attention to the following warnings and cautions: Hazardous Voltage may be present: Special measures and precautions must be taken when using this device. Some potentials (voltages) on the device may present a hazard to the user. This device should only be used by employees from our company with knowledge and training in working with these types of devices that contain live circuits.
  • Page 6 Network Camera  User’s  Manual Power Cord Requirements: The connector that plugs into the wall outlet must be a grounding-type male plug designed for use in your region. It must have certification marks showing certification by an agency in your region. The connector that plugs into the AC receptacle on the power supply must be an IEC 320, sheet C13, female connector.
  • Page 7 Network  Camera  User’s  Manual Lead Content: Please recycle this device in a responsible manner. Refer to local environmental regulations for proper recycling; do not dispose of device in unsorted municipal waste.

  • Page 8: Safety Instructions

    Network  Camera  User’s  Manual Safety Instructions These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘Warnings’ and  ‘Cautions’: Warnings: Serious injury or death may be caused if any of these warnings are neglected. Cautions: Injury or equipment damage may be caused if any of these cautions are neglected.
  • Page 9 Network  Camera  User’s  Manual Cautions: ●Make sure the power supply voltage is correct before using the camera. ●Do not drop the camera or subject it to physical shock. ●Do not touch sensor modules with fingers. If cleaning is necessary, use a clean cloth with a bit of ethanol and wipe it gently.

  • Page 10: Table Of Contents

    Network  Camera  User’s  Manual Contents CHAPTER 1 SYSTEM REQUIREMENTS ................... 11 CHAPTER 2 NETWORK CONNECTION ..................12 LAN ................12 ETTING THE ETWORK AMERA OVER THE 2.1.1 Wiring over the LAN ......................12 2.1.2 Detecting and Changing the IP Address ................13 WAN ................
  • Page 11 Network  Camera  User’s  Manual 6. 4 . 1 Confi g uri n g Video Settings ....................46 6.4.2 Configuring Audio Settings ....................48 6.4.3 Configuring ROI Encoding ....................48 ....................49 ONFIGURING MAGE ARAMETERS 6.5.1 Configuring Display Settings ....................49 6.5.2 Configuring OSD Settings ....................

  • Page 12: Chapter 1 System Requirements

    Network  Camera  User’s  Manual Chapter 1 System Requirements Operating System: Microsoft Windows XP SP3/Vista/Win7/Win8/Server 2003/ Server 2008 32-bit CPU: Intel Pentium IV3.0 GHz or higher RAM: 1G or higher Display: 1024×768 resolution or higher Web Browser: Internet Explorer 8.0 and above, Apple Safari 5.02 and above, Mozilla Firefox 3.5 and above and Google Chrome 8 and above.

  • Page 13: Chapter 2 Network Connection

    Network  Camera  User’s  Manual Chapter 2 Network Connection Before you start: ●If you want to set the network camera via a LAN (Local Area Network), please refer to Section 2.1 Setting the Network Camera over the LAN. ●If you want to set the network camera via a WAN (Wide Area Network), please refer to Section 2.2 Setting the Network Camera over the WAN.

  • Page 14: Detecting And Changing The Ip Address

    Network  Camera  User’s  Manual 2.1.2 Detecting and Changing the IP Address You need the IP address of the network camera to see it via a web browser. Steps: 1. To get the IP address, you can choose either of the following methods: ●Use SADP, a software tool which can automatically detect the online network cameras in the LAN and list the device information including IP address, subnet mask, port number, device serial number, device version, etc.,...

  • Page 15: Setting The Network Camera Over The Wan

    Network  Camera  User’s  Manual 2.2 Setting the Network Camera over the WAN Purpose: This section explains how to connect the network camera to the WAN with a static IP or a dynamic IP. 2.2.1 Static IP Connection Before you start: Please apply a static IP to the camera.

  • Page 16: Dynamic Ip Connection

    Network Camera  User’s  Manual 2.2.2 Dynamic IP Connection Before you start: Please apply a dynamic IP from an ISP. With the dynamic IP address, you can connect the network camera to a modem or a router. ●Connecting the network camera via a router Steps: 1.
  • Page 17 Network  Camera  User’s  Manual Normal Domain Name Resolution Figure 2-7 Normal Domain Name Resolution Figure 2-7 Steps: 1. Apply a domain name from a domain name provider. 2. Configure the DDNS settings in the DDNS Settings interface of the network camera. Refer to Section 5.3.4 Configuring DDNS Settings for detailed configuration.

  • Page 18: Chapter 3 Access To The Network Camera

    Network  Camera  User’s  Manual Chapter 3 Access to the Network Camera 3.1 Accessing by Web Browsers Steps: 1. Open the web browser. 2. In the address field, input the IP address of the network camera (Example: 192.0.0.64) and press the Enter key to enter the login interface. 3.
  • Page 19 Network  Camera  User’s  Manual Download and Install Plug-in Figure 3-2 Install Plug-in (1) Figure 3-3 Install Plug-in (2) Figure 3-4...

  • Page 20: Accessing Via Client Software

    Network  Camera  User’s  Manual Install Plug-in (3) Figure 3-5 Note: You may have to close the web browser to install the plug-in. Please reopen the web browser and log in again after installing the plug-in. 3.2 Accessing by Client Software 3.2.1 Accessing by VMS Client Software The product CD contains the VMS Client Software (Client or PCNVR).
  • Page 21 Network  Camera  User’s  Manual Figure 3-6 VMS CLIENT SOFTWARE Live View VMS CLIENT SOFTWARE Figure 3-7 Configuration Panel Note: For detailed information about VMS Client software, please refer to the user manual of the VMS CLIENT SOFTWARE software.

  • Page 22: Chapter 4 Wi-Fi Settings

    Network  Camera  User’s  Manual Chapter 4 Configuring the Wi-Fi Settings Purpose: By connecting to the wireless network, you don’t need to use cable of any kind for network connection, which is very convenient for the actual surveillance application. Note: This chapter is only applicable for the cameras with the Wi-Fi module built-in. 4.1 Configuring Wi-Fi Connection in Manage and Ad-hoc Modes Before you start:...
  • Page 23 Network  Camera  User’s  Manual 4. Check the check box to select the Network Mode as Managed, and the Security mode and the Encryption Type of the network is automatically shown when you select the wireless network, please don’t change it manually. Note: These parameters are exactly identical with those of the router.
  • Page 24 Network  Camera  User’s  Manual Ad-hoc Connection Point Figure 4-6 Choose the SSID and connect. Security Mode Description: You can choose the Security Mode as not-encrypted, WEP, WPA-personal, WPA- enterprise, WPA2-personal, WPA2-enterprise. WEP mode: ●Authentication - Select Open or Shared Key System Authentication, depending on the method used by your access point.
  • Page 25 Network  Camera  User’s  Manual Authentication. ●Key length - This sets the length of the key used for the wireless encryption, 64 or 128 bit. The encryption key length can sometimes be shown as 40/64 and 104/128. ●Key type - The key types available depend on the access point being used. The following options are available: HEX - Allows you to manually enter the hex key.

  • Page 26: Easy Wi-Fi Connection With Wps Function

    Network  Camera  User’s  Manual ●User Name - Enter the user name to present to the network ●Password - Enter the password of the network ●PEAP Version - Select the PEAP version used at the access point. ●Label - Select the label used by the access point. ●EAPOL version - Select version (1 or 2) depending on the version used at the access point ●CA Certificates - Upload a CA certificate to present to the access point for...
  • Page 27 Network Camera User’s  Manual Check the check box of to enable WPS. Choose the connection mode as PBC. Note: Support of this mode is mandatory for both the Access Points and the connecting devices. Check on the Wi-Fi router to see if there is a WPS button. If yes push the button and you can see the indicator near the button start flashing, which means the WPS function of the router is enabled.
  • Page 28 Network  Camera  User’s  Manual Wi-Fi Settings – WPS PIN Mode Figure 4-8 Choose the If the PIN code is generated from the router side, you should enter the PIN code you get from the router side in the field. Click button.

  • Page 29: Ip Property Settings For Wireless Network Connection

    Network  Camera  User’s  Manual 4.3 IP Property Settings for Wireless Network Connection The default IP address of wireless network interface controller is 192.168.1.64. When you connect the wireless network you can change the default IP. Steps: Enter the TCP/IP configuration interface. Configuration>...

  • Page 30: Chapter 5 Live View

    Network  Camera  User’s  Manual Chapter 5 Live View Live View Page Purpose: The live video page allows you to view live video, capture images, utilize PTZ control, set/call presets and configure video parameters. Log in the network camera to enter the live view page, or you can click on the menu bar of the main page to enter the live view page.

  • Page 31: Starting Live View

    Network  Camera  User’s  Manual pan/tilt unit has been installed). Live View Parameters: Configure the image size and stream type of the live video. 5.2 Starting Live View In the live view window as shown in Figure 5-2, click on the toolbar to start the live view of the camera.

  • Page 32: Operating Ptz Control

    Network  Camera  User’s  Manual click to record the live video. The saving paths of the captured pictures and clips can be set on the Configuration > Local Configuration page. To configure remote scheduled recording, please refer to Section 6.2. Note: The captured image will be saved as a JPEG file in your computer.

  • Page 33: Setting / Calling A Preset

    Network  Camera  User’s  Manual Focus near/far Iris open/close Light on/off Wiper on/off One-touch focus Initialize lens Adjust speed of pan/tilt movements 5.4.2 Setting / Calling a Preset ●Setting a Preset: 1. In the PTZ control panel, select a preset number from the preset list. Setting a Preset Figure 5-3 2.

  • Page 34: Configuring Live View Parameters

    Network Camera User’s  Manual Calling a Preset Figure 5-4 5.5 Configuring Live View Parameters Purpose: You can select the stream type and adjust the image size on the live view page. ●Click tab under the menu bar of the live view interface to select the stream type as main stream or sub-stream for live viewing.

  • Page 35: Chapter 6 Network Camera Configuration

    Network  Camera  User’s  Manual Chapter 6 Network Camera Configuration 6.1 Configuring Local Parameters Note: The local configuration refers to the parameters of the live view, record files and captured pictures. The record files and captured pictures are the ones you record and captured using the web browser and thus the saving paths of them are on the PC running the browser.

  • Page 36: Configuring Time Settings

    Network  Camera  User’s  Manual Multicast function. For detailed information about Multicast, refer to Section 6.3.1 TCP/IP Settings. ●Li v e View Performance: Set the live view performance to Least Delay, Balanced or Best Fluency. ●Record File Settings: Set the saving path of the recorded video files. Valid for the record files you recorded with the web browser.
  • Page 37 Network  Camera  User’s  Manual Fi g ure 6-2 Time Settings ●Sel e ct the Time Zone. Sel e ct the Time Zone which is the closest to the location of the camera from the drop-down menu. ●Synchroni z i n g Time by NTP Server. (1) Check the check box to enable the NTP function.

  • Page 38: Configuring Network Settings

    Network  Camera  User’s  Manual Fi g ure 6-4 Time Sync Manually ●Click the tab page to enable the DST function and Set the date of the DST period. DST Settings Figure 6-5 2. Click to save the settings. 6.3 Configuring Network Settings 6.3.1 Configuring TCP/IP Settings Purpose: TCP/IP settings must be properly configured before you operate the camera over...

  • Page 39: Configuring Port Settings

    Network Camera User’s  Manual TCP/IP Settings Figure 6-6 2. Configure the basic network settings, including the NIC Type, IPv4 or IPv6 Address, IPv4 or IPv6 Subnet Mask, IPv4 or IPv6 Default Gateway, MTU settings and Multicast Address. Notes: ●The valid value range of MTU is 500 ~ 1500. ●The Multicast sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address.

  • Page 40: Configuring Pppoe Settings

    Network  Camera  User’s  Manual Port Settings Figure 6-7 2. Set the HTTP port, RTSP port and Server/SDK port of the camera. HTTP Port: The default port number is 80, and can be changed to any port range 1024 to 65535. RTSP Port: The default port number is 554.

  • Page 41: Configuring Ddns Settings

    Network  Camera  User’s  Manual 6.3.4 Configuring DDNS Settings Purpose: If your camera is set to use PPPoE as its default network connection, you can use the Dynamic DNS (DDNS) for network access. Before you start: Registration on the DDNS server is required before configuring the DDNS settings of the camera.
  • Page 42 Network  Camera  User’s  Manual DynDNS Settings Figure 6-10 IP Server: Steps: (1) Enter the Server Address of the IP Server. (2) Click to save the settings. Note: For the IP Server, you have to apply a static IP, subnet mask, gateway and preferred DNS from the ISP.

  • Page 43: Configuring Snmp Settings

    Network  Camera  User’s  Manual device alias in the server. (4) Click to save the new settings. Note: It will ask for a reboot for the settings to take effect. 6.3.5 Configuring SNMP Settings Purpose: You can set the SNMP function to get camera status, parameters and alarm related information and manage the camera remotely when it is connected to the network.

  • Page 44: Configuring 802.1X Settings

    Network  Camera  User’s  Manual 2. Check the corresponding version check box ( ) to enable the feature. 3. Configure the SNMP settings. Note: The settings of the SNMP software should be the same as the settings you configure here. 4. Click to save and finish the settings.

  • Page 45: Configuring Qos Settings

    Network  Camera  User’s  Manual 6.3.7 Configuring QoS Settings Purpose: QoS (Quality of Service) can help solve the network delay and network congestion by configuring the priority of data sending. Steps: Enter the QoS Settings interface: Configuration >Advanced Configuration > Network > QoS QoS Settings Figure 6-14 2.

  • Page 46: Configuring Upnp™ Settings

    Network  Camera  User’s  Manual FTP Settings Figure 6-15 2. Configure the FTP settings; and the user name and password are required for login the FTP server. Directory: In the Directory Structure field, you can select the root directory, parent directory and child directory. When the parent directory is selected, you have the option to use the Device Name, Device Number or Device IP for the name of the directory;...

  • Page 47: Configuring Video And Audio Settings

    Network  Camera  User’s  Manual Configure UPnP Settings Figure 6-16 To port mapping with the default port numbers: Choose To port mapping with the customized port numbers: Choose And you can customize the value of the port number by yourself. 3. Click to save the settings.
  • Page 48 Network  Camera  User’s  Manual Fi g ure 6-17 Confi g ure Video Settings 2. Select the Stream Type of the camera to main stream (normal), sub-stream or third stream. The main stream is usually for recording and live viewing with good bandwidth, and the sub-stream and third stream can be used for live viewing when the bandwidth is limited.

  • Page 49: Configuring Audio Settings

    Network  Camera  User’s  Manual Profile: Basic profile, Main Profile and High Profile for coding are selectable. I Frame Interval: Set the I-Frame interval to 1~400. SVC: Scalable video coding is an extension of the H.264/AVC standard. The technology encodes the video signal with layers; the basic layer and several enhanced layers and it is adaptive to the network condition to transfer different video streams.

  • Page 50: Configuring Image Parameters

    Network  Camera  User’s  Manual quality of the ROI whereas the background information is less focused. Steps: 1. Enter the ROI settings interface Configuration > Advanced Configuration > Video / Audio >ROI 2. Draw the region of interest on the image. There are four regions can be drawn. 3.
  • Page 51 Network  Camera  User’s  Manual Display Settings Figure 6-19 Descriptions of parameter configuration Overexposure Prevention: Enable or disable the function in this field. Exposure T ime: Value ranges from 1/25 to 1/100,000s. Adjust it according to the lightening condition. Iris Mode: Auto and Manual are selectable.

  • Page 52: Configuring Osd Settings

    Network  Camera  User’s  Manual Wide dynamic range can be used when there is a high contrast of the bright area and the dark area of the scene. BLC Area: BLC area is the area sense the light intensity; Close, Up, Down, Left, Right and Center are selectable.
  • Page 53 Network  Camera  User’s  Manual OSD Settings Figure 6-20 2. Check the corresponding checkbox to select the display of camera name, date or week if required. 3. Edit the camera name in the text field of Camera Name. 4. Select from the drop-down list to set the time format, date format, display mode and the OSD font size.

  • Page 54: Configuring Text Overlay Settings

    Network  Camera  User’s  Manual 6.5.3 Configuring Text Overlay Settings Purpose: You can customize the text overlay. Steps: 1. Enter the Text Overlay Settings interface: Configuration > Advanced Configuration > Image > Text Overlay 2. Check the checkbox in front of textbox to enable the on-screen display. 3.

  • Page 55: Configuring Picture Overlay

    Network  Camera  User’s  Manual 3. Click Privacy Mask Settings Figure 6-23 4. Click and drag the mouse in the live video window to draw the mask area. Note: You are allowed to draw up to 4 areas on the same image. 5.

  • Page 56: Configuring And Handling Alarms

    Network  Camera  User’s  Manual 2. Click button to add a picture from your PC. 3. Click button to upload it. 4. Check the checkbox to enable the function. X Coordinate and Y Coordinate values are for the location of the picture on the image. And the Picture width and Height are for adjusting the size of the picture.
  • Page 57 Network  Camera  User’s  Manual (2) Check the checkbox of Enable Motion Detection. Enable Motion Detection Figure 6-24 (3) Click . Click and drag the mouse on the live video image to draw a motion detection area. Note: You can draw up to 8 motion detection areas on the same image. (4) Click to finish drawing.
  • Page 58 Network  Camera  User’s  Manual Arming T ime Figure 6-25 (1) Click to edit the arming schedule. The Figure 5-28 shows the editing interface of the arming schedule. (2) Choose the day you want to set the arming schedule. (3) Click to set the time period for the arming schedule.
  • Page 59 Network  Camera  User’s  Manual You can specify the linkage method when an event occurs. The following contents are about how to configure the different types of linkage method. Linkage Method Figure 6-27 Steps: (1) Check the checkbox to select the linkage method. Audible warning, notify surveillance center, send email, upload to FTP, trigger channel and trigger alarm output are selectable (Optional).

  • Page 60: Configuring Tamper-Proof Alarm

    Network  Camera  User’s  Manual 6.6.2 Configuring Tamper-proof Alarm Purpose: You can configure the camera to trigger the alarm when the lens is covered and take alarm response action. Steps: 1. Enter the Tamper-proof Settings interface: Configuration > Advanced Configuration > Events > Tamper-proof Tamper-proof Alarm Figure 6-28 2.

  • Page 61: Configuring External Alarm Input

    Network Camera User’s  Manual 6.6.3 Configuring External Alarm Input Steps: 1. Enter the Alarm Input Settings interface: Configuration > Advanced Configuration> Events > Alarm Input: 2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally Open) and NC (Normally Closed).

  • Page 62: Configuring Alarm Output

    Network  Camera  User’s  Manual Linkage Method Figure 6-30 Network  Camera  User’s  Manual 6.6.4 Configuring Alarm Output...
  • Page 63 Steps: 1. Enter the Alarm Output Settings interface: Configuration>Advanced Configuration> Events > Alarm Output 2. Select one alarm output channel in the Alarm Output drop-down list. You can also set a name for the alarm output (optional). 3. The Delay time can be set to 5sec, 10sec, 30sec, 1min, 2min, 5min, 10min or Manual.

  • Page 64: Handling Exceptions

    Network  Camera  User’s  Manual 6.6.5 Handling Exceptions The exception type can be HDD full, HDD error, network disconnected, IP address conflicted and illegal login to the cameras. Steps: 1. Enter the Exceptions Settings interface: Configuration > Advanced Configuration> Events > Exception 2.

  • Page 65: Email Sending Triggered By Alarm

    Network  Camera  User’s  Manual 6.6.6 Email Sending Triggered by Alarm Purpose: The system can be configured to send an Email notification to all designated receivers if an alarm event is detected, e.g., motion detection event, video loss, tamper- proof, etc. Before you start: Please configure the DNS Server settings under Basic Configuration >...
  • Page 66 Network  Camera  User’s  Manual And the SSL SMTP port is 465. Enable SSL: Check the checkbox to enable SSL if it is required by the SMTP server. Attached Image: Check the checkbox of Attached Image if you want to send emails with attached alarm images.

  • Page 67: Configuring Snapshot Settings

    Network  Camera  User’s  Manual 6.6.7 Configuring Snapshot Settings Purpose: You can configure the scheduled snapshot and event-triggered snapshot. The captured picture can be stored in the SD card (if supported) or the netHDD (For detailed information about netHDD, please refer to Section 7.1 Configuring NAS Settings).
  • Page 68 Network Camera  User’s  Manual 2) Check checkbox in Motion Detection Settings or Alarm Input interface. Please refer to Step 3 Set the Alarm Actions Taken for Motion Detection in Section 6.6.1, or Step 4 Configuring External Alarm Input in Section 6.6.4.

  • Page 69: Face Detection

    Network  Camera  User’s  Manual 6.6.8 Face Detection Note: Face detection is only for certain modules, check the specification for whether the module supports the function. If you enable the face detection, once a face appears in the surveillance area, it will be detected and certain actions may be triggered by the detection.

  • Page 70: Chapter 7 Storage Settings

    Network  Camera  User’s  Manual Chapter 7 Storage Settings Before you start: To configure record settings, please make sure that you have the network storage device within the network or the SD card inserted in your camera. 7.1 Configuring NAS Settings Before you start: The network disk should be available within the network and properly configured to store the recorded files, log files, etc.
  • Page 71 Network  Camera  User’s  Manual Initializing Figure 7-3 When the initialization completed, the status of disk will become Normal. View Disk Status Figure 7-4 View Disk Status Figure 7-4 Notes: ●Up to 8 NAS disks can be connected to the camera. ●To initialize and use the SD card after insert it to the camera, please refer to the steps of NAS disk initialization.

  • Page 72: Configuring Recording Schedule

    Network  Camera  User’s  Manual 7.2 Configuring Recording Schedule Purpose: There are two kinds of recording for the cameras: manual recording and scheduled recording. For the manual recording, refer to Section 5.3 Recording and Capturing Pictures Manually. In this section, you can follow the instructions to configure the scheduled recording.
  • Page 73 Network  Camera  User’s  Manual Note: The record parameter configurations vary depending on the camera model. 4. Click to edit the record schedule. Record Schedule Figure 7-7 5. Choose the day to set the record schedule. (1) Set all-day record or segment record: ●If you want to configure the all-day recording, please check the All Day checkbox.
  • Page 74 Network  Camera  User’s  Manual Section 5.6.4. ●Record Triggered by Motion & Alarm If you select Motion & Alarm, the video will be recorded when the motion and alarm are triggered at the same time. Besides configuring the recording schedule, you have to configure the settings on the Motion Detection and Alarm Input Settings interfaces.
  • Page 75 Network  Camera  User’s  Manual Edit Record Schedule Figure 7-8 (3) Check the checkbox and click to copy settings of this day to the whole week. You can also check any of the checkboxes before the date and click (4) Click to save the settings and exit the Edit Record Schedule interface.

  • Page 76: Chapter 8 Playback

    Network  Camera  User’s  Manual Chapter 8 Playback Purpose: This section explains how to view the remotely recorded video files stored in the network disks or SD cards. Steps: 1. Click on the menu bar to enter playback interface. Playback Interface Figure 8-1 2.
  • Page 77 Network  Camera  User’s  Manual process. Playback Toolbar Figure 8-3 Description of the buttons Table 8-1 Button Operation Button Operation Play Capture a picture Start/Stop clipping video Pause files Audio on and adjust Stop volume/Mute Speed down Download video files Download captured Speed up pictures Playback by...

  • Page 78: Chapter 9 Log Searching

    Network  Camera  User’s  Manual Chapter 9 Log Searching Purpose: The operation, alarm, exception and information of the camera can be stored in log files. You can also export the log files on your demand. Before you start: Please configure network storage for the camera or insert a SD card in the camera. Steps: 1.
  • Page 79 4. To export the log files, click to save the log files in your computer.

  • Page 80: Chapter 10 Others

    Network  Camera  User’s  Manual Chapter 10 Others 10.1 Managing User Accounts Enter the User Management interface: Configuration >Basic Configuration> Security > User Or Configuration > Advanced Configuration> Security > User The admin user has access to create, modify or delete other accounts. Up to 15 user accounts can be created.
  • Page 81 Network  Camera  User’s  Manual Add a User Figure 10-2 Add a User Figure 10-2 ●Modify a User Steps: 1. Left-click to select the user from the list and click 2. Modify the User Name, Level or Password. 3. In the Basic Permission field and Camera Configuration field, you can check or uncheck the permissions.

  • Page 82: Configuring Rtsp Authentication

    Network  Camera  User’s  Manual ●Delete a User Steps: 1. Left-click the user name you want to delete and click 2. Click on the pop-up dialogue box to delete the user. Delete a User Figure 10-4 Delete a User Figure 10-4 ●Anonymous Visit 10.2 Configuring RTSP Authentication Purpose:...

  • Page 83: Anonymous Visit

    Network  Camera  User’s  Manual 10.3 Anonymous Visit Purpose: Enabling this function allows visit for whom doesn’t  have the user name and password of the device. Steps: 1. Enter the Anonymous Visit interface: Configuration> Advanced Configuration> Security > Anonymous Visit Anonymous Visit Figure 10-6 2.
  • Page 84 Network  Camera  User’s  Manual IP Address Filter Interface Figure 10-8 2. Check the checkbox of Enable IP Address Filter. 3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed are selectable. 4. Set the IP Address Filter list. ●Add an IP Address Steps: (1) Click the...

  • Page 85: Viewing Device Information

    Network  Camera  User’s  Manual Modify an IP Figure 10-10 (3) Click the button to finish modifying. ●Delete an IP Address Left-click an IP address from filter list and click button. ●Delete all IP Addresses Click button to delete all the IP addrsses. 5.

  • Page 86: Maintenance

    Network  Camera  User’s  Manual 10.6 Maintenance 10.6.1 Rebooting the Camera Steps: 1. Enter the Maintenance interface: Configuration > Basic Configuration> System > Maintenance Or Configuration > Advanced Configuration> System > Maintenance: 2. Click to reboot the network camera. Reboot the Device Figure 10-12 10.6.2 Restoring Default Settings Steps:...

  • Page 87: Upgrading The System

    Network  Camera  User’s  Manual start importing configuration file. Note: You need to reboot the camera after importing configuration file. 2. Click and set the saving path to save the configuration file in local storage. Import/Export Configuration File Figure 10-14 10.6.4 Upgrading the System Steps: 1.

  • Page 88: Rs-485 Settings

    Network  Camera  User’s  Manual 1. Enter RS-232 Port Setting interface: Configuration> Advanced Configuration> System > RS232 RS-232 Settings Figure 10-16 Note: If you want to connect the camera by the RS-232 port, the parameters of the RS-232 should be exactly the same with the parameters you configured here. 2.

  • Page 89: Appendix

    Network  Camera  User’s  Manual Appendix Appendix 1 SADP Software Introduction ●Description of SADP V2.0 SADP (Search Active Devices Protocol) is a kind of user-friendly and installation-free online device search tool. It searches the active online devices within your subnet and displays the information of the devices. You can also modify the basic network information of the devices using this software.

  • Page 90: Restore Default Password

    Network  Camera  User’s  Manual Note: You can click on each column heading to order the information; you can click to expand the device table and hide the network parameter panel on the right side, or click to show the network parameter panel. ●Modify network parameters Steps: 1.

  • Page 91: Appendix 2 Port Mapping

    Network  Camera  User’s  Manual Appendix 2 Port Mapping The following settings are for TP-LINK router (TL-R410). The settings vary depending on different models of routers. Steps: 1. Select the WAN Connection Type, as shown below: Figure A.2.1 Select the WAN Connection Type 2.
  • Page 92 Network  Camera  User’s  Manual ports of another camera as 81, 8001, 555, 8201 with IP 192.168.1.24. Refer to the steps as below: Note: The 8200 port changes with the 8000 port with a constant value of 200. So, if the 8000 port is changed to 8005, then the 8200 port should be changed to 8205.
  • Page 93 NOTES:...

Table of Contents