702CC 702SF Type/Tipo: 297-4C + 297-2C + 297-1CF Before operating, please read the Operating Manual! Before operating, please read the Operating Instructions! Veuillez lire le mode d’emploi avant la mise en service! Leer las instrucciones de uso antes de la puesta en servicio! Antes de pôr a máquina em funcionamento leia as instruções de operação!
702CC 702SF IMPORTANT SAFETY NOTES INITIATION << The machine may not be operated by more << Danger of injury! Keep all SCOPE OF APPLICATION: than one person at any given time! loose articles of clothing, ties, Datastroyer 702CC/702SF The document shredder ®...
Page 3
702CC 702SF OPERATION 7 = Control display (Fig. 1) SWITCHING THE MACHINE ON: Never feed the shredder with a “Oil cutters” Proceed as follows to switch the machine to quantity of material exceeding the Comes on when the cutters in the cross “Ready”:...
Should you need to re-order the special oil see 702CC (Type 297-4C): 0.16x1.81 in. (cross-cut) “SPECIAL ACCESSORIES”. 702CC (Type 297-2C): 0.07x0.59 in. (cross-cut) 702SF (Type 297-1CF): 0.03x0.18 in. (cross-cut) AUTOMATIC ENERGY SAVING: Cutting speed: If the machine is not used for a while it 702CC (Type 297-4C): 5.12 in./sec.
Page 5
702CC 702SF IMPORTANT SAFETY NOTES INITIATION << The machine may not be operated by more << Danger of injury! Keep all SCOPE OF APPLICATION: than one person at any given time! loose articles of clothing, ties, Datastroyer 702CC/702SF The document shredder ®...
Page 6
702CC 702SF OPERATION 7 = Control display (Fig. 1) SWITCHING THE MACHINE ON: Never feed the shredder with a “Oil cutters” Proceed as follows to switch the machine to quantity of material exceeding the Comes on when the cutters in the cross “Ready”:...
Page 7
Should you need to re-order the special oil see 702CC (Type 297-4C): 4x46 mm (cross-cut) “SPECIAL ACCESSORIES”. 702CC (Type 297-2C): 1.9x15 mm (cross-cut) 702SF (Type 297-1CF): 0.8x4.5 mm (cross-cut) AUTOMATIC ENERGY SAVING: Cutting speed: If the machine is not used for a while it 702CC (Type 297-4C): 0.13 m/sec.
702CC 702SF RECOMMANDATIONS IMPORTANTES DE SÉCURITÉ MISE EN MARCHE << La machine ne doit pas être utilisée par << Risque de blessure! N’approchez DOMAINES D’UTILISATION: plusieurs personnes en même temps! jamais du bloc de coupe les vête- Datastroyer Le destructeur de documents ®...
Page 9
702CC 702SF UTILISATION ELEMENTS DE COMMANDE : MISE EN MARCHE DE LA MACHINE : Ne jamais alimenter l’appareil 7 = Voyant de contrôle (fig. 1) Pour mettre la machine sur « prêt à fonctionner », avec une quantité de matériau « Lubrifier bloc de coupe » procéder comme suit: supérieure au maximum indiqué...
702CC 702SF INDICACIONES DE SEGURIDAD IMPORTANTES PUESTA EN SERVICIO << ¡El aparato no debe ser operado por varias << ¡Peligro de lesión! No acercar a CAMPO DE APLICACIÓN: personas al mismo tiempo! la apertura de alimentación pie- Datastroyer 702CC/702SF El shredder de datos ®...
Page 12
702CC 702SF MANEJO ELEMENTOS DE MANDO: CÓMO CONECTAR EL APARATO: ¡No introduzca nunca en el aparato 7 = Indicador de control (Fig. 1) Para conectar el aparato en “listo para el uso” más material del indicado como “Engrasar mecanismo de corte”...
4x46 mm (cross-cut) La máquina vuelve a estar lista para el uso. Si 702CC (Tipo 297-2C): 1,9x15 mm (cross-cut) desea pedir el aceite especial, consulte el apartado 702SF (Tipo 297-1CF): 0,8x4,5 mm (cross-cut) “ACCESORIOS ESPECIALES”. Velocidad de corte: 702CC (Tipo 297-4C): 0,13 m/sec.
702CC 702SF INSTRUÇÕES DE SEGURANÇA IMPORTANTES ENTRADA EM FUNCIONAMENTO << O aparelho não deve ser manejado por << Risco de ferimento! Manter CAMPO DE APLICAÇÃO: várias pessoas ao mesmo tempo! peças de vestuários penden- Datastroyer 702CC/702SF A trituradora ® é uma Os elementos de segurança servem para...
Page 15
702CC 702SF UTILIZAÇÃO ELEMENTOS DE COMANDO: LIGAR A MÁQUINA: Nunca alimente o aparelho com uma 7 = Indicador de controlo (Fig. 1) Para ligar a máquina no modo “Operacional”, quantidade de material superior “Olear o mecanismo de corte” proceda da seguinte forma: à...
Page 16
702CC (Tipo 297-4C): 4x46 mm (cross-cut) operacional. Para encomendar o óleo especial, 702CC (Tipo 297-2C): 1,9x15 mm (cross-cut) consulte “ACESSÓRIOS ESPECIAIS”. 702SF (Tipo 297-1CF): 0,8x4,5 mm (cross-cut) Velocidade do corte: ECONOMIZAÇÃO AUTOMÁTICA DE ENERGIA: 702CC (Tipo 297-4C): 0,13 m/seg. Se a máquina não for usada durante algum tempo, 702CC (Tipo 297-2C): 0,13 m/seg.
Page 20
Dieses Papier ist aus 100 % Altpapier ohne optische Aufheller hergestellt This paper made from 100 % unbleached recycled paper Papier recyclable à 100 %...