Assembly Instructions - E Rider Model 15 User Manual And Assembly Instructions

ASSEMBLY INSTRUCTIONS

For its safe transit, your E RIDER has been secured to a wooden base
and enclosed in sturdy packaging. It will be necessary to fit together
those parts which could not be in their working position during transit.
You will need the following tools:
A pair of scissors
A pair of sturdy pliers or wire cutters
A large, cross head screwdriver
2 x 10mm open end spanners
A 15mm open end spanner (for pedals)
A 17mm open end spanner (for side stand)
An adjustable spanner may be used in place of the 15mm &
17mm spanners
Assembly can be completed by one person, but a second pair of hands
will be helpful at some stages.
Unpacking
:
You will find the charging cable threaded along the outside of the
packaging and this is to allow the battery to be kept in good condition
during transit and storage. Movement during shipping often results in
this cable becoming scuffed however in most cases this is not a
problem. If you believe that there is excessive damage to the cable
please contact us to get a replacement and it will be very helpful if you
are able to include a picture of the damage when reporting the
problem.