Peavey PV 8 Operating Manual page 8

EFX Return (30)
The EFX Return inputs (Left/Mono‚ Right) feature two
(TRS) balanced or Tip, Sleeve (TS) unbalanced connectors. The EFX Return is controlled via the EFX/Return Level
Control (19).
Left/Right Outputs (31)
The Left/Right Outputs feature two
(TRS) balanced or Tip, Sleeve (TS) unbalanced connectors.
Control Room Outputs (32)
The Control Room Outputs feature two
(TRS) balanced or Tip, Sleeve (TS) unbalanced connectors. The Control Room Output Level is adjusted with the
Headphone Level Control (21).
MON Send (33)
The MON Send features a 1
Ring, Sleeve (TRS) balanced or Tip, Sleeve (TS) unbalanced connectors. The MON mix is determined by the
amount of signal being sent to the MON bus in each channel and by the Monitor master control.
EFX Send (34)
The EFX Send features a 1 ⁄ " TRS Z-balanced jack in the master section. These outputs can be used with Tip‚ Ring,
4
Sleeve (TRS) balanced or Tip, Sleeve (TS) unbalanced connectors. The EFX mix is determined by the amount of
signal being sent to the EFX bus in each channel and by the EFX Master Control.
Power Adapter Input (35)
Use to connect the included power supply. Be sure the power supply is connected to the PV
to a power source. Use 16 VAC 1 A adapter only.
Note: Replace only with Peavey part number 70902571 for Domestic or 70902572 for Export.
Power Switch (36)
Depressing the power switch supplies power to the unit.
Tape In/Out (38 & 37)
The tape input jacks are designed to accommodate tape‚ CD or computer sound card output levels. The output
level is +4 dBu for connection to a recorder or sound card input. The tape inputs can be used as an additional
stereo input by engaging the Tape to Main Mix switch (14). The tape input can also be used to monitor the
recorder/sound card output without the risk of feedback.
1
1 ⁄ " TRS Z-balanced jacks. These outputs can be used with Tip‚ Ring, Sleeve
4
1 ⁄ " TRS Z-balanced jacks. These outputs can be used with Tip, Ring, Sleeve
4
⁄ " TRS Z-balanced jack in the master section. This output can be used with the Tip,
4
35
36
8
⁄ " TS jacks. These inputs can be used with Tip‚ Ring, Sleeve
4
37 38
® 8 before connecting