Advertisement
Specifically, the Ratio and the Threshold are directly accessible through the
RATIO/KNEE Encoder and THR/VAR potentiometer, selecting so immediately
the desired values.
The Attack and Release times, can be accessed and set using the "Atk/Rel
Select" and "Atk/Re/ Confirm" buttons.
RATIO/KNEE: the RATIO/KNEE Encoder is allowing to set the RATIO value of the
RMS Compressor and the KNEE type.
With reference to the Fig D picture
The following table describes the relation between the Encoder position and
the RMS Compression Ratio and Knee type.
HARD (White) Area: the Knee of the RMS Compressor is HARD type
SOFT (Black) Area: the Knee of the RMS Compressor is SOFT type
For both Knee types, the positions from 1 to 8 of the Encoder are giving the
ratios here below:
1.
2.
3.
4.
5.
6.
7.
8.
Ratio = 2:1
---> Omega = 22.500 Deg
Ratio = 3:1
---> Omega = 15.000 Deg
Ratio = 4:1
---> Omega = 11.250 Deg
Ratio = 5:1
---> Omega = 9.000 Deg
Ratio = 6:1
---> Omega = 7.500 Deg
Ratio = 7:1
---> Omega = 6.428 Deg
Ratio = 8:1
---> Omega = 5.625 Deg
Ratio = 32:1
---> Omega = 1.406 Deg
10
Advertisement
