Maintenance Instructions - Aztec GEM II Manual

Maintenance Instructions

The ring cutter may be wiped down with any decontamination solution but must not be soaked
in fluid or autoclaved.
DISC CARE
Remove disc (RETAIN LOCKING SCREW). Examine disc for damage or excessive wear - if this is the
case, replace disc.
FINGER GUARD CARE
Clean up finger guard and guide channel of finger guard. Examine metal guard; make sure disc
hasn't cut through. If so replace metal guard.
PERSPEX SHIELD CARE
Wipe any residue from Perspex shield.
After use, examination and cleaning, always return the GEM II Ring Cutter and its components
back to their allotted spaces in the GEM II presentation case.
4
www.aztecmedical.co.uk