Full hd satellite receiver with internet tv (10 pages)
Summary of Contents for Ismart X8 MEGA
Page 1
USER MANUAL iSmart-X8 MEGA HD Digital Satellite Receiver l DVB-S2 Tuner l WIFI ● ● l HDMI1.3, FULL-HD 1080P supported l HD Media Player ● ● l DiSEqC 1.0, 1.1 and 22K switching l Picture Player ● ● l 5000 channels memory space l Music Player...
Table of contents 1. General Information ........................ 2 1.1 Important Safety Instructions ....................2 1.2 Additional Safety Information ....................2 1.3 Markings on the Rear Panel ....................3 1.4 General operation of receiver ....................3 1.5 Unpacking ..........................4 2. Main Features .......................... 4 3.
14 Trouble Shooting ........................20 1 General Information 1.1 Important Safety Instructions Please read and save for future reference Thank you for choosing our product. Before installation, we would like to remind you some notes, which is very important for operating safely and properly, as follows: −...
1.3 Markings on the Rear Panel General: This mark appears on the rear panel of the receiver. Part 1 This mark consists of two Graphical Symbols and warning message. The detailed specifications are as follows: CAUTION: To reduce the risk of electric shock, do not remove cover (or back).
1.5 Unpacking Please open the package and make sure the following items are inside: Remote Control Unit(RCU) User’s Manual Digital Satellite Receiver 2 Main Features DVB-S2 Tuner HDMI1.3, FULL-HD 1080P supported DiSEqC 1.0, 1.1 and 22K switching 5000 channels memory space PVR (Personal Video Record) Teletext &...
3.1 Remote Control Unit You can control this receiver by this remote controller with full function. (POWER): Turns the receiver On / Off. (MUTE) : The sound On / Off. USB : Access directly to the "Media Management" menu. MP3 : Access directly to the "Media List-MP3" menu. JPEG : Access directly to the "Media List-JPEG"...
3.2 Front Panel FUNCTION MENU Shows the main menu and back to previous menu Confirm the selection, or jump back to last menu CH+/CH- Channel change(Up/Down) VOL+/VOL- Volume Control(Up/Down) 3.3 Rear Panel CONNECTOR FUNCTION LNB IN Connect to satellite antenna cable RS232 Connect to PC for software upgrade VIDEO...
3.4 Installation of receiver Please find relevant reference of installation described as below: When connecting new equipment to the receiver, be sure checking first related instructions for the proper way of installation. 4 Installation There are five sub items: l Antenna Setting: LNB settings l Satellite List: Satellite list setting l Transponder List: Transponder list setting...
Installation menu. To enter the Installation menu, press UP/DOWN keys in the Main Menu to highlight the Installation item and then press ENTER or RIGHT keys. A password input dialog pops out. After entering a correct password (default password is ‘0000’), the Installation menu appears.
4.3 TP List Select the transponder which you need to be searched. Press Green key to add new.satellite or transponder. Press Red key to edit satellite or transponder. Press Yellow key to delete satellite or transponder. Press blue key to Search. 4.4 Motor Setting Through the Motor Setting page you can control the motor to adjust the direction of...
enter the Channel menu, press UP/DOWN keys in the Main Menu to highlight the Channel item and then press ENTER or RIGHT keys. The Channel menu is shown as below: 5.1 Favorite List l The system provides a favorite channels list function. You can through the Favorite List menu to add, delete or group your favorite channels.
6.1 OSD Language The OSD Language item defines the language of menu and prompts. To change the OSD language, press UP/DOWN keys to highlight this item and then press ENTER or RIGHT keys to pull down a language list. In this list, you can press UP/DOWN keys to select a language and then press ENTER key to confirm.
the Preference menu press UP/DOWN keys to highlight the Preferred Subtitle item and then press ENTER or RIGHT keys to pull down a language list. In this list, you can press UP/DOWN keys to select a desired language and then press ENTER key to confirm.
Config setting menu. PVR File Format: Set the format of record files (MPEG2 files), TS or PS. l File Size: Set the size of a single record file. l Preferred Storage: Select a preferred storage device among USB devices and Card. l Timeshift: Set a method to start the timeshift function.
l Date: Scheduled date. To edit it, highlight the Date item first and then press RIGHT key to enter its editing state. l Program Name: Scheduled program. To edit it, highlight the Program Name item first and then press RIGHT key to enter its editing state. l Start Time: Start time of schedule.
Setting menu press ENTER key, and a password input dialog will appear. Input a correct password (default: 0000) to enter the Child Lock menu. See the figure below: There are three menu items: l System Lock: Turn on or off the child lock function. l Parental Rating: Set rating from 4 ages to 48 ages.
(see the figure below). After entering this item, a user name and password input interface will appear. − If the Static IP method is chosen, the IP Address, Netmask, Gateway and DNS Server items will become active (see the figure below). Users can establish the network connection by giving these parameters.
Page 18
brightness setting interfaces. Brightness The Brightness item is to adjust the brightness level of the system. After highlighting the Brightness item, press ENTER key to enter its setting interface. Press LEFT/RIGHT keys to adjust the brightness level from 0 to 24. After setting, press ENTER key or just wait for 3 seconds to return to the AV menu.
highlighting this item, press ENTER key to pop out an option list. The list has three options: 8 Bits, 10 Bits and 12 Bits. 9 Game The Game menu manages several small games for your entertainment. At present the system provides 5 small games. In the Main Menu, press UP/DOWM keys to highlight the Game menu item and then press ENTER key to enter the Game...
Timeshift Length and Timeshift to Record items to set the time length of timeshift and whether or not to turn on the record function during timeshift. After setting, the Timeshift function will auto work 5 seconds after entering any channel. To watch the program content before current time, press FR key to go back to the desired time period.
Photo: Browsing picture in USB flash Music: Playing music in USB flash EbooK: Reading ebook in USB flash Moive: Playing moive in USB flash ISO: Playing ISO in USB flash Game: Playing game in USB flash Record Manager: Manager Record file in USB flash Disk Manager:Manager all file in USB flash...
Page 22
existing terrestrial channel or Video Signal. The RCU is not working. Out of battery Change the battery RCU is aimed at wrong Aim the RCU at the unit, and direction make sure no blocks between the front panel and RCU Note: If you still cannot resolve the problem with above reference.
Page 67
USER MANUAL iSmart-X8 MEGA HD Digital Satellite Receiver Récepteur (Tuner) DVB-S2 Lecteur multimédia HD (Haute Définition) Supporte HDMI 1.3, HD COMPLET 1080P WIFI DiSEqC 1.0, 1.1 et commutation de 22Ko Lecteur d’image 5000 espaces mémoire pour les chaines (canaux) Lecteur de musique ...
Page 68
Table des matières Informations générales ......................2 1.1 Importantes information de sécurité ..................2 1.2 Informations de sécurité additionnelles................2 1.3 Inscriptions sur le panneau arrière ..................3 1.4 Fonctionnement générale du receveur................. 3 1.5 Déballage ..........................4 2.Principales fonctionnalités ......................4 3.Contrôle et fonctions ........................
1.Informations générales 1.1 Importantes information de sécurité A lire et a conserver pour une utilisation ultérieure Merci d’avoir choisi notre produit. Avant l’installation, nous aimerions vous formuler quelques recommandations très importantes pour le bon fonctionnement et la sécurité : Etre sur d’avoir lu le manuelle avant toute utilisation Ne jamais ouvrir le couvercle, il est très dangereux de toucher aux composants a l’intérieur, cela peur entrainer une électrocution.
1.3 Inscriptions sur le panneau arrière Générales Ces indications apparaissent sur le panneau arrière du receveur. Partie 1 Ces indications sont composées de deux symboles graphiques et messages d’alertes. Ils sont détaillés comme suit : AVERTISSEMENT Pour réduire les risques de chocs électriques, ne pas enlever le couvercle (ou l’arrière).
1.5 Déballage Veuillez s’il vous plait ouvrir le paquet et assurez-vous que les éléments suivants sont à l'intérieur : La télécommande Le manuel d'utilisateur Le récepteur satellite numérique 2.Principales fonctionnalités Récepteur (Tuner) DVB-S2 Supporte HDMI 1.3, HD COMPLET 1080P DiSEqC 1.0, 1.1 et commutation de 22Ko 5000 espaces mémoire pour les chaines (canaux) PVR (Enregistrement Personnel de Vidéo) Télétexte, sous-titrage et langues audio pris en charge...
3.Contrôle et fonctions 3.1 Télécommande Télécommande (RCU) Vous pouvez contrôler ce récepteur par cette télécommande avec fonction complète. (MUTE) : On / Off le son. (POWER): Allumer le récepteur On / Off. AUDIO: Ouvre la fenêtre du mode audio. TV/R: Selection des chaînes TV ou radio. SUB: Afficher les sous titres/ TEXT: Afficher les informations télétextes.
3.2 Panneau avant & Panneau arrière FUNCTION MENU Shows the main menu and back to previous menu Confirm the selection, or jump back to last menu CH+/CH- Channel change(Up/Down) VOL+/VOL- Volume Control(Up/Down) LNB IN Connecter à un câble stellite RS232 Connecter a un Pc pour la mise a jour logiciel Connecter au port vidéo/audio de la télévision HDMI...
3.3 Installation du récepteur Veuillez vous référer aux recommandations d’installation comme décrivent ci-après : lors de la connexion de nouveaux équipements au récepteur, assurez-vous d’avoir bien lu les instructions connexes pour une installation correcte. 4. Installation Elle se compose de cinq sous-éléments : •...
4.1 Configuration de l’antenne Dans le menu d’installation, appuyez sur la touche UP/DOWN (HAUT/BAS) pour sélectionner l’option Réglage de l’antenne puis appuyez sur ENTER (ENTRER) ou RIGHT (DROITE) pour entrer les paramètres d’antenne. Les paramètres de l’antenne sont suivants : •...
Appuyez sur la touche jaune pour supprimer satellite ou transpondeur. Appuyez sur la touche bleue pour effectuer une recherche. Numérisation fenêtre Quand il commence recherche, la force et la qualité du signal sera montré. Vous pouvez appuyer sur ok pour la recherche de numériser et appuyez sur g: EXIT pour quitter, et les programmes ont été...
5. Chaines menu Chaines trois éléments : l’administrateur de chaine, la liste des favoris et la configuration des chaines. Pour entrer dans le menu Chaine, pressez la touche UP/DOWN dans le menu principal pour sélectionner l’élément souhaité puis pressez la touche ENTRER ou DROITE. LE MENU Chaine est présenté...
ci-contre. 6. Préférence Le menu Préférence est principalement utilisé pour changer la langue et les paramètres audio. Dans le menu principal, servez vous des touches UP/DOWN pour accéder au menu préférence puis pressez ENTRER ou DROITE pour sélectionner. 6.1 Langue de l’OSD Cet élément vous permet de définir la langue du menu et des invites.
6.3 Sous-titres préfère Cet élément est utilisé pour définir la langue des sous-titres. Lorsqu’un programme est sous-titré en plusieurs langues, vous pouvez fixer des priorités via ces outils. Deux langues de sous-titres peuvent être paramétrées, la première ayant la priorité élevée.
• Répétition film : régler le mode de répétition pour les films. Trois options : Dir, Un et Off. • Répétition musique : régler le mode de répétition pour la musique. Trois options : Dir, Un et Off. • Répétition photo : régler le mode de réplétion pour les images. Trois options : Dir, Un et Off.
7.1 Minuteries Grace à l’élément minuterie, vous pouvez gérer les programmes prédéfinis. Dans ce menu, vous pouvez voir et modifier le nom des programmes prédéfinis, définir le temps de début, le type de programme et autres. Voir la figure ci-contre. Dans la figure ci-contre, les champs de gauche à...
- Magnétoscope : similaire au mode enregistreur, a la différence que les AD, TTX et sous-titres ne peuvent être enregistrés. - Chaine : le système passe automatiquement à la chaine prévu au moment prévu. - Veille : le système se mettra en veille à l’heure prévue. •...
7.4 Configuration Ethernet Vous pouvez à partir de cet onglet effectuer les paramétrages de connexion Ethernet. Sélectionner l’élément Configuration Ethernet partir du menu Configuration puis pressez ENTRER ou DROITE. Ce menu comporte cinq sous-menus (ci-contre) : • Type de lien : Permet de choisir entre une connexion câblée et une connexion sans fil.
7.7 Auto veille Cet élément autorise au système une mise en veille automatique s’il n’y a pas d’opération pendant un laps de temps défini. S’il est en mode <On>, alors le système se mettra en veille après trois heures de non activité. 8.
Cet élément permet de définir les rapports entre la longueur et la largeur de la video. Apres l’avoir sélectionné, pressez sur ENTRER pour afficher une liste d’options que sont : 16 :9, plein écran, 4 :3 LB (Letter Box) et 4 :3 PS (Pan Scan). Sortie video Vous permet de configurer le format de la video.
10. Enregistrement Si vous souhaitez enregistrer le programme en cours étant en mode plein écran, appuyez juste sur la touche REC. • S’il y a un appareil USB ou une carte, le système l’initialisera puis commencera l’enregistrement. Voir ci-contre. • Pour effectuer une pause pendant l’enregistrement, juste pressez la touche PAUSE.
La longueur et l’enregistrement du Timeshift sont indisponibles lorsque vous choisissez la méthode Off. Dans ce cas, vous pouvez appuyer les touches PAUSE ou FR pour lancer la fonction Timeshift seulement lorsque vous enregistrez un programme. La longueur du Timeshift dépend de l’espace libre sur le périphérique USB ou la carte. Vous pouvez accéder a l’élément mise a jour du système de la façon suivante : Menu principal >>...
Photo : parcourir des images à partir d’un flash USB Musique : jouer de la musique à partir d’un flash USB Ebook : lecture de livre électronique à partir d’un flash USB ISO : lecture ISO a partir d’un flash USB Jeux : Jouer à...
Page 89
votre chaine satellitaire avec un câble RF et la chaine du receveur avec une chaine numérique émise récepteur plus appropriée ou connecter interfère avec un signal vidéo le système à l’aide d’un câble terrestre existant SCART télécommande Batterie faible Changer la batterie fonctionne pas CH est dans une mauvaise Dirigez la télécommande vers...
Need help?
Do you have a question about the X8 MEGA and is the answer not in the manual?
Questions and answers