Panasonic WV-CLR930 Operating Instructions Manual page 10

q Side cover
When the function switches or operation
buttons are used, the side cover is slid
leftward to the lock position.
w ALC lens connector
The ALC connector is connected to this
ALC lens connector. If the connector
shape is a different type, replace the
connector
(accessory).
e Tripod socket
This socket is used to mount the camera
mount bracket (option). The tripod socket
can be mounted on either top or bottom
of the camera head.
(Tripod socket hole: 1/4-20 UNC for tri-
pod)
r Function switches
The function switches contain the follow-
ing switches described from the top to
bottom.
External synchronization switch (1)
( page 18)
RS485 termination switch (2)
( page 21)
2-wire/4-wire selection switches (3-5)
( page 21)
t Operation buttons
This buttons are used to perform various
settings in the setup menu.
J: Up button (UP)
K: Down button (DOWN)
L: Left button (LEFT), NEAR
M: Right button (RIGHT), FAR
I: Setting button (SET), ABF/MENU
y External synchronization input con-
nector
( page 14)
u Video output connector
The video output cable (locally procured)
is connected to this video output connec-
tor.
10
with the ALC connector
i Power indicator
This indicator lights up when the power is
on.
o External terminal
( page 18)
!0 RS485 terminal ( page 19)
!1 Power connector
(only for WV-CLR930)
The included power cord is connected to
this power connector.
!2 Signal ground terminal
(only for WV-CLR934)
The ground wire is connected to this ter-
minal.
!3 AC/DC power terminal
(only for WV-CLR934)
The power supply of 24 V AC or 12 V DC
is connected to this terminal.