1. Manuals
  2. Brands
  3. DAHAO Manuals
  4. Control Systems
  5. BECS-185
  6. Owner's manual

DAHAO BECS-185 Owner's Manual

Computerized control system for embroidery machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

刺绣机电脑
Computerized Embroidery Machine
BECS-185
（General Part）
Version：2012-02
操作手册
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BECS-185 and is the answer not in the manual?

Questions and answers

Mehmood
January 28, 2025

What is this error

User image 67987e722976c
0
1 comments:
Mr. Anderson
February 10, 2025

The error codes for the DAHAO BECS-185 computerized control system indicate various issues related to machine operation. Here are some examples:

- EC18 (Half return error): Check the color-changing wheel, rheostat, and connections.
- EC19 (Needle position error): Verify the needle position using the color-changing wheel and check the rheostat.
- EC20 (Main motor overtime): Inspect motor rotation, coupler blockage, encoder plug connection, and driver condition.
- EC21 (Change color over limit): Check the rheostat and needle settings.
- EC22 (Main motor reverse): Inspect the 14P plug on the motor encoder and rheostat.
- EC23 (Cannot embroider): No details provided.
- EC24 (Cannot frame back): No details provided.
- EC26 (Cannot trim): Check for mechanical issues or a broken knife return detection sensor.
- EC36 (Sequin is on): Lift the sequin device and retry.
- EC37 (Pull bar error): No details provided.
- EC38 (Special embroidery overtime): No details provided.
- EC41 (File not exist): Retry the operation, restart the machine, or clear memory.
- EC42 (File directory full): No details provided.

Each code corresponds to a specific problem, often requiring inspection of components or adjustments to settings.

This answer is automatically generated

0

Related Manuals for DAHAO BECS-185

Summary of Contents for DAHAO BECS-185

  • Page 1 刺绣机电脑 Computerized Embroidery Machine BECS-185 （General Part） Version：2012-02 操作手册 OWNER’S MANUAL...

  • Page 5: Table Of Contents

    Table of Content Table of Content Chapter 1 General Information................1 1.1 Warnings and Cautions......................1 1.2 Main Features........................3 1.3 Technical Specifications...................... 6 Chapter 2 Embroidery Guide................7 2.1 Structure and Usage Instruction of Control Panel............... 7 2.2 Instruction of Control Panel....................8 2.3 Instruction of the Main Interface..................
  • Page 6 Table of Content 3.7 Format Disk........................47 3.8 Deleting Objects in Disk (Including Designs and Inventories)......... 48 3.9 Create a New Inventory in the Current Inventory............. 49 Chapter 4 Common Parameters and Color-Changing Order......51 4.1 Setting of Common Parameters..................51 4.1.1.
  • Page 7 Table of Content 5.2.4. Forbid Design Output........................64 Chapter 6 Memory Design Management............65 6.1 Memory Design Management Interface and Other Memory Design Operation Interfaces 6.2 Select a Design to Embroider.................... 67 6.3 Memory Design Preview....................68 6.4 Arrange the Memory Design..................... 70 6.5 Copy the Memory Design....................71 6.6 Compile Parameter Design....................
  • Page 8 Table of Content 7.2.1. General Information........................93 7.2.2. Document and View Operation Area...................94 7.2.3. Locating Stitch..........................94 7.2.4. Convert Stitch Code........................95 7.2.5. Insert Stitch..........................95 7.2.6. Delete Stitch..........................95 7.2.7. Move Stitch..........................95 7.2.8. Add Stitch Continuously......................96 Chapter 8 Letter Design Operation..............97 8.1 Generate Letter Design......................
  • Page 9 Table of Content 9.11 Needle Down......................... 115 9.12 Reset X/Y Displacement....................116 9.13 Reset Total Stitch......................117 9.14 Positioning Idling......................117 9.14.1. Forward Idling..........................117 9.14.2. Backward Idling........................118 9.14.3. Go to Next Color........................118 9.15 Cording Embroidery...................... 119 Chapter 10 Other Functions................120 10.1 Check Emb Related Parameters..................120 10.2 View Statistics Info......................121 10.3 Set Frame Origin/ Power-off Protection................122 10.4 Frame Origin Recovery....................
  • Page 10 Table of Content 10.9 Debugging Machine.......................141 10.10 Date and Time......................142 10.11 Touching Panel Correction..................142 Chapter 11 About JF Sequin Embroidery............144 11.1 Brief of Sequin Embroidery...................144 11.2 Embroidery Procedure of Sequin...................145 11.3 Input Sequin Design.......................145 11.4 Edit Sequin Design......................146 11.5 Setting of Multi-Sequin Embroidery Parameters............153 11.6 Change Color Order and Set Sequin Mode..............
  • Page 11 Appendix 3 Error List..................196 Appendix 4 Method for Making Special Multi-sequin Design..... 200 Appendix 5 Network Function of Embroidery Machine.......210 Appendix 6 Automatic Limits Function............216 All rights reserved. Beijing DAHAO Technology Corp., Ltd. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 13: Chapter 1 General Information

    Chapter 1 General Information Thank you for using Dahao Computerized Control System for Embroidery Machine. Please read this manual carefully so as to operate the machine correctly and effectively. Besides that, you should keep this manual properly for future use.
  • Page 14 Chapter 1 General Information Don't jam the vent on the device. Don’t insert other items into the machine, or it Attention may get fire. Attention Make sure the installation direction is correct. Don't expose the machine to humidity gas, corrosive gas, water, and other Attention flammable material.

  • Page 15: Main Features

    Chapter 1 General Information If you need to open the machine cover, please cut off the power supply at first. Due Warning to the capacitance, operator must wait at least one minute before opening the machine cover. Circuit boards can be damaged by static. The circuit boards can only be Attention disassembled by professional technicians.
  • Page 16 Chapter 1 General Information 6 、 Storage of Frequently Used Parameters and Color-Changing Order for Each Design Design will be saved along with its parameters, color-changing orders and needle bar colors. System can save the operational details for each design. Users can set parameters for a design during the embroidery process of the previous design, which will save time and improve efficiency.
  • Page 17 Chapter 1 General Information 13 、 Brake Adjustment User can adjust the parameter of brake to let the main shaft stop at the correct position according to the characters of his own machines. 14 、 Save Start Point This function can save the start point of each design, which waives the works of user for searching the start point at embroidering the identical design.

  • Page 18: Technical Specifications

    Chapter 1 General Information After setting the combined design, the system can compile that design to generate a new one and save it to the memory card. The newly generated design can be used for embroidering, output or other operations. 21 、...

  • Page 19: Chapter 2 Embroidery Guide

    Chapter 2 Embroidery Guide Chapter 2 Embroidery Guide 2.1 Structure and Usage Instruction of Control Panel Structure of Control Panel 1 、 Touching Panel It adopts high-luminance LCD displayer and touching screen man-machine interaction interface. 2 、 Buttons Common actions can be realized with the buttons on the control panel. Those actions include: frame-moving speed shift, frame-moving, manual color-changing and Multi-task shift.

  • Page 20: Instruction Of Control Panel

    Chapter 2 Embroidery Guide life of the panel and to maintain its performance, please don’t apply too much pressure on the screen during operation. Neither can user use the sharp or hard tools to click the screen. III. Instruction of Floppy Disk The floppy driver of this computer is the external attached device, which is connected to the operation panel with the USB port.
  • Page 21 Chapter 2 Embroidery Guide Number Name Description Low Needle Press this key, the current needle position will not move Position towards to the low needle position until it reaches the Color-changing first needle position. High Needle Press this key, the current needle position will not move Position towards to the high needle position until it reaches the Color-changing...

  • Page 22: Instruction Of The Main Interface

    Chapter 2 Embroidery Guide 2.3 Instruction of the Main Interface Note: in the following charts, the icons with are the touchable keys; those without that figures are for the machine status. Display Name Description Reference Page Embroidery Ready The machine is in the Ready Status, Chapter2.5 Status and user can carry out preparation...
  • Page 23 Chapter 2 Embroidery Guide Display Name Description Reference Page Embroidery Currently, machine is at the Chapter2.5 Confirmation Status Embroidery Confirmation Status, Cancel the and user can start embroidery at any time. When the machine stops, user Embroidery can click that key and confirm the operation for cancelling the Embroidery Confirmation Status.
  • Page 24 Chapter 2 Embroidery Guide Display Name Description Reference Page idling status 。 High-speed Idling The machine is currently in Chapter2.5 high-speed idling status. When user presses the start key for normal embroidery, the main shaft and the frame remain inactive while the count of stitches increases.
  • Page 25 Chapter 2 Embroidery Guide Display Name Description Reference Page (Press or Color-changing Key on panel). After the machine turn to the needed needle position, user can press the start key for the embroidery (Manual Start). Auto If the machine is set at Auto Chapter2.5 Color-changing Color-changing, user should set the...
  • Page 26 Chapter 2 Embroidery Guide Display Name Description Reference Page parameters like, sewing parameters, machine application parameters and machine parameters. When the file inventory is more than one page, press this key is turn to the previous page. If it is at the top page, Previous Page the system will keep still.
  • Page 27 Chapter 2 Embroidery Guide Display Name Description Reference Page Network Connection Failure Network Status (Disconnected Status Connected , Successful Log-in ） High-speed Manual When the machine stops, press the Frame-moving manual frame-moving keys to move Status the frame, and the frame will move in the high speed.
  • Page 28 Chapter 2 Embroidery Guide Display Name Description Reference Page mark will be displayed at the main interface. Thread Breakage This figure will appear when the machine stops due to the thread-breakage Color-changing The status of color-changing at stop. Cyclic Embroidery The cyclic embroidery is available for this machine.
  • Page 29 Chapter 2 Embroidery Guide Display Name Description ReferencePage Main Shaft After stop, if the main shaft is not at the Chapter2.5 Manual Adjustment proper position , user can press this key to adjust the main shaft to the right position Manual When the machine stops and the main shaft Chapter2.5...
  • Page 30 Chapter 2 Embroidery Guide Display Name Description ReferencePage Back to Origin After the machine stops, user can click this Chapter2.5 key to have the frame automatically return to the origin of the current design. Back to Stop After the machine stops, user can click Chapter2.5 Point Manual Frame-moving key to move the...

  • Page 31: Notes On Menu Status

    Chapter 2 Embroidery Guide Display Name Description Reference Page Assistant Click it to have access to Assistant Chapter 9 Operation Operation Management interface, where includes the assistant operations during or before the embroidery, such as save/restore origin, set offset point, border operation, located idling, clearance of accumulated stitch number, clearance of X/Y travel amount.
  • Page 32 Chapter 2 Embroidery Guide Input Pattern ② Select ③ Assistant Operations ④ Confirm Embroidery ⑤ Start Embroidery ⑥ Manual Operation ⑦ Cancel Embroidery I 、 Input Design The user can input designs through network, floppy disk or USB disk. Only with displayed （...
  • Page 33 Chapter 2 Embroidery Guide 1 、 In the Design Management interface, click “ ” to set the design for embroidery. 2 、 If the design’s start point has been saved, the prompt “The start point of pattern is saved. Move frame to start point right now?” will appear when entering the main interface. Click and the frame will automatically return to the start point.
  • Page 34 Chapter 2 Embroidery Guide 2 、 Set the color-changing order —— click and then needle to change color, after that the system will have access to the color-changing interface. 3 、 Set appliqué — — click to have access to the Design Management interface. Click Other Operation to set the appliqué...
  • Page 35 Chapter 2 Embroidery Guide 1 、 After the assistant operations, user can click to activate the window. After user selects , the figure (Cancel Embroidery) turns to (Confirm Embroidery), which means the machine has entered the Embroidery Ready Status. is chosen, the embroidery machine will still be in the status of “Cancel Embroidery”.
  • Page 36 Chapter 2 Embroidery Guide Click the position pointed in the above picture and the status will switch among (Auto Color-changing, Auto Start), (Auto Color-changing, Manual Start) and (Manual Color-changing, Manual Start) 4 、 Set Status between Normal Embroidery and Idling Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 37 Chapter 2 Embroidery Guide Click the position pointed in the above picture and the status will switch among (Normal Embroidery) ， (Low Speed Idling) and (High Speed Idling). V 、 Embroidery Status 1 、 Stop: Press the Start key to begin the embroidery (Including the low speed idling and the high speed idling).
  • Page 38 Chapter 2 Embroidery Guide prompt window, where user needs to click “Trim Upper&Bottom Thread” to trim threads, or click “Trim Bottom Thread” to trim the bottom thread only. Clicking is to quit the thread-trimming operation. 2 、 Manual Frame-Moving ： When the machine stops, press the keys （...
  • Page 39 Chapter 2 Embroidery Guide machine head will automatically move to the corresponding needle position. User can also change the color by pressing the color-changing shortcut keys marked with “ ＋ , － ”. Please pay attention: if the user wants to automatically save the order of the manual color-changing (when the “Store Manual Color”...
  • Page 40 Chapter 2 Embroidery Guide 7 、 Back to Stop Point Click in the main interface and choose in the followed prompt. Then the frame will return to the stop point. 8 、 Positioned Idling Use this function after embroidery confirmation. Positioned idling enables the machine to move to the designated position without embroidering according to the user’s requests.
  • Page 41 Chapter 2 Embroidery Guide separated from the frame), user should move the frame to the designated position and click . After this operation, the needle is still at down position. When the cloth is placed on the frame again, click to turn the main shaft to 100º...

  • Page 42: Normal Embroidery, Returning And Patching

    Chapter 2 Embroidery Guide 2.6 Normal Embroidery, Returning and Patching In embroidery confirmation status (in that moment, the “ ” is displayed), pressing start key is to order machine to perform the normal embroidery (holding the start key is to perform the slow embroidery).

  • Page 43: Relations Among Normal Embroidery, Idling And Positioned Idling

    Chapter 2 Embroidery Guide 2.7 Relations among Normal Embroidery, Idling and Positioned Idling Functions as idling, returning, etc. are intended for the convenience of patching. Low-speed idling, high-speed idling or positioning idling can be used according to the needs in embroidery.

  • Page 44: Thread-Breakage Detection

    Chapter 2 Embroidery Guide Press the Stop key to retreat (Including the low speed idling and the high speed idling). Running: At normal embroidery, hold Start key to lower the speed of embroidery, release the Start Key to recover the speed. Press Stop key to stop the embroidery.
  • Page 45 Chapter 2 Embroidery Guide  embroidery. III 、 Embroidery Running Status Shift among these three working statuses ： In preparation status ( is displayed), after you select design for embroidery and set the parameters, please firstly press , then press .

  • Page 46: Chapter 3 Disk Management

    Chapter 3 Disk Management Chapter 3 Disk Management In disk management, users can input the designs in the disk to machine, and vise versa; meanwhile, users can enjoy some common disk managing actions, like erasing file or Inventory, initializing the disk, etc. Floppy disk and USB disk are both supported by this system. Users can save design data based on different types.
  • Page 47 Chapter 3 Disk Management In this window all the storage devices will be displayed. Their information includes the icons, words and numbers. The icon is the device type. The indicates the USB disk. The words are the file mark of the disk (if the disk has no file mark, the default letter will be used), and the number in the brackets is for the disk’s digital symbol.
  • Page 48 Chapter 3 Disk Management Figure Name Description Display the design files and folders within the disk in File List icons. It’s used to select files. Turn to the previous page if the file list is more than Previous Page one page. If it is at the first page, this key will be unavailable.
  • Page 49 Chapter 3 Disk Management Figure Name Description Single-selection Switch between single- selection and /Multi-selection multi-selection Exit from the disk management. Exit Turn to the next page if the file list is more than one Next Page page. If it is at the last page, this key will be unavailable.
  • Page 50 Chapter 3 Disk Management Figure Name Description Back to Upper Return to upper level Level Deletion Delete the file or file folder Design Output Save the design in the memory into the USB disk. Figure Name Description Create Create new file folder Inventory Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 51: Select One Or Several Designs

    Chapter 3 Disk Management Figure Name Description Disk Formation Format the USB disk Help Display the help menu of the disk management interface. Page The current page number and total page number Information Disk and Display the disk capacity, free space of disk, memory Memory capacity and free space in memory Information...
  • Page 52 Chapter 3 Disk Management The objects are in the unselected status as default. When one of them is selected, its icon and words will show a different color, and the information area will show its contents like stitch number and date. 2 、...

  • Page 53: Design Preview

    Chapter 3 Disk Management 5 、 Click to select all objects in the current folder. Only in the multi-selection mode can this key be effective. Click this key to select all objects in the current inventory. 3.3 Design Preview 1 、 In the disk management interface, click the design for preview. Design files and Inventories are shown in figure in the list.

  • Page 54: Design Input

    Chapter 3 Disk Management The system loads the data from the disk and displays the design’s image according to a certain ratio. At the same time the design’s information and color-changing number will be shown in the information area. Note: User can select more than one design for preview at a time. For the method, please refer to 3.2.
  • Page 55 Chapter 3 Disk Management The system asks the customer to input the number and name of design saved in memory. 3 、 The user inputs the number and name of design. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 56: Design Output

    Chapter 3 Disk Management The system provides the minimum available design number as the default value. The customer can use the small panel to change the value. Refer to sequin operation for “Is multi-sequin Design?”. When several designs are input for one time, the user can only input the number for the first design.
  • Page 57 Chapter 3 Disk Management The system displays the list of memory design. The user needs select the design for output, and then click Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 58: Inventory Operation

    Chapter 3 Disk Management 3 、 Input design name The system uses the design name in memory as the default name for the design in disk. Use keyboard on the right to change the name. At changing the design name in disk, user needs select the item in the left window at first, and then change it in the right window.

  • Page 59: Format Disk

    Chapter 3 Disk Management Click “ ” to let system return to the upper level of inventory and refresh the interface. 3.7 Format Disk 1 、 Select the disk device for formatting (Refer to 3.1) 2 、 Click “ ” to format the disk The system will display the Format Disk interface, where the storage information of the current disk, alert information for disk formatting and formatting process bar, as well as Start and back button, are displayed.

  • Page 60: Deleting Objects In Disk (Including Designs And Inventories)

    Chapter 3 Disk Management key to return to the disk management interface. Note: the system will format the disk in DOS format. 3.8 Deleting Objects in Disk (Including Designs and Inventories) 1 、 Select one or more objects for deletion (Refer to 3.2) 2 、...

  • Page 61: Create A New Inventory In The Current Inventory

    Chapter 3 Disk Management Note ： If the user wants to delete an inventory, the system will delete all the files and sub-inventories within this inventory. If a file has the property of “Read Only” or “Disk Write Protection”, the file will be unable to delete. 3.9 Create a New Inventory in the Current Inventory 1 、...
  • Page 62 Chapter 3 Disk Management 3 、 Click The system will create the corresponding folder in the disk and refresh the current list of objects. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 63: Chapter 4 Common Parameters And Color-Changing Order

    Chapter 4 Common Parameters and Color-Changing Orderr Chapter 4 Common Parameters and Color-Changing Order In this system each design has its own settings of the normal parameters (like scale and repetition) and color-changing order. When a new design is selected, the corresponding settings of normal parameters and color-changing order will become effective.

  • Page 64: Setting X-Y Scales

    Chapter 4 Common Parameters and Color-Changing Order The way for setting the parameter is similar to each other. This chapter will explain how to set the “X-Y Scales” as an example and give the definitions of other parameters (Refer to 4.1.1 as reference).

  • Page 65: Rotate

    Chapter 4 Common Parameters and Color-Changing Orderr X-Y direction. Press to cancel the last input digit and press to erase all entered digits. Pressing the “X Scale” and “Y Scale” can shift and mark the currently modified parameter. 3 、 Click to save the parameters modified.

  • Page 66: Prior Mode

    Chapter 4 Common Parameters and Color-Changing Order Prior Mode 4.1.4. There are two modes: “Rotation prior to scaling” and “Scaling prior to rotation”. When the user has set the parameters “X-Y Scales” and “Rotate”, the design will rotate first and then scale up/down.

  • Page 67: Setting Of Color-Changing Order

    Chapter 4 Common Parameters and Color-Changing Orderr 4.2 Setting of Color-Changing Order Color-Changing Interface 4.2.1. Figure Name Description Display the design according to real-time Design Display setting of color-changing order. Preview Area the result of color-changing. Display the sequence numbers of the List of Color Block color blocks in the design.
  • Page 68 Chapter 4 Common Parameters and Color-Changing Order Figure Name Description Click this key and a needle number to Insert a Needle insert it in the current list of needle Number sequence. Delete the needle number of the current Delete a Needle operation position in the needle list.

  • Page 69: Setting Of Color-Changing Order

    Chapter 4 Common Parameters and Color-Changing Orderr Setting of Color-Changing Order 4.2.2. 1 、 Click in the main interface to enter the parameter setting interface. 2 、 Click in the parameter setting interface to enter the color-changing interface. 3 、 Input the needle numbers in order in the needle number selection area. The design displayed in the design display area and the color list in the color-changing display area will be renewed along with the input of each needle number.

  • Page 70: Set Needle Color

    Chapter 4 Common Parameters and Color-Changing Order Set Needle Color 4.2.3. To make the color displayed in the screen get close to the color in real embroidery, this system can set all the needle colors used by the current design. This setting will be saved with color-changing order.

  • Page 71: Interchange Of Needle Colors

    Chapter 4 Common Parameters and Color-Changing Orderr color-changing order setting interface; clicking is to return to the color-changing order setting interface without saving. Interchange of Needle Colors 4.2.4. 1 、 Click in the main interface to enter the parameter setting interface. 2 、...

  • Page 72: Chapter 5 Setting Of Embroidery Parameters

    Chapter 5 Setting of Embroidery Parameters Chapter 5 Setting of Embroidery Parameters Based on function, embroidery parameters are divided into groups (please refer to Appendix 1 Parameter List). Note: For the machine with encoding functions, the parameters are divided into three groups according to their authorizations: The parameters titled with “1”...
  • Page 73 Chapter 5 Setting of Embroidery Parameters 2 、 Have access to the parameter setting interface, where user can select parameters for setting. Figure Name Description Parameter List Display the parameter list of the current group and Window their values. Switch key Switch among different parameter groups Page Keys Color-changing Set the color used by current design...

  • Page 74: Procedure For Setting General Parameters

    Chapter 5 Setting of Embroidery Parameters 5.1 Procedure for Setting General Parameters The setting procedure is similar for each general parameter. You can follow the guide of this section to set parameters. 1 、 Select Parameter Group The user can use the keys on the bottom of the screen to look for the parameter. And ensure no password or the password has been input if the machine has set password.

  • Page 75: Instruction Of Some Functions Within General Parameters

    Chapter 5 Setting of Embroidery Parameters Select the parameter in the list. And in the right parameter-changing window there will appear keys to change the value. User can use these keys to change the current parameter. 3 、 Change the current parameter in the parameter-changing window Change the current parameter in the parameter-changing window.

  • Page 76: Memory Of Manual Color-Changing

    Chapter 5 Setting of Embroidery Parameters Memory of Manual Color-changing 5.2.2. In embroidery confirmation status, the user can choose whether to store the manual color-changing’s needle position into the color-changing order unit. Its purposes are as follows: 1) if mistakes are found for the automatic color-changing order in embroidery, the color-changing order can be modified with manual color-changing operation.

  • Page 77: Chapter 6 Memory Design Management

    Chapter 6 Memory Design Management Chapter 6 Memory Design Management Memory design management includes selection of embroidery design, setting of designs, change of designs and operations for creating designs. 6.1 Memory Design Management Interface and Other Memory Design Operation Interfaces In the main interface, click to have access to the memory design management interface.
  • Page 78 Chapter 6 Memory Design Management Figure Name Description Design Display Area Show the design files in memory by icons. It’s mainly for selection Set as Embroidery In embroidery preparation status, the Design selected design will be embroidered. Select Order Method Click it to select the method for arrangement according to your needs.

  • Page 79: Select A Design To Embroider

    Chapter 6 Memory Design Management In this interface click the buttons to enter the corresponding operation interfaces. Please read the following paragraphs for detailed explanation. Click to turn the page, and click to return to the memory design management interface. 6.2 Select a Design to Embroider 1 、...

  • Page 80: Memory Design Preview

    Chapter 6 Memory Design Management 6.3 Memory Design Preview The selected design can be previewed in the memory design preview interface according to the designated way. Display Name Description Design Display the information of the selected design Information Design Preview Display the design in the pointed method and Area speed...
  • Page 81 Chapter 6 Memory Design Management Display Name Description Move left Move the design leftward Actual Display Display the design in the actual size. So the size of the design on the screen is the actual size of the design after embroidery. Quit Quit the operation in design preview interface Help...

  • Page 82: Arrange The Memory Design

    Chapter 6 Memory Design Management 4 、 Click to control the size of the displayed design; click to control the position of the displayed design. Click to control the speed of the display of designs. Click control the display and pause of design. Click to turn to the pause status, where the single step of design can be displayed.

  • Page 83: Copy The Memory Design

    Chapter 6 Memory Design Management 1 、 Click in the main interface to enter the memory design management interface. 2 、 Click in the memory design management interface. 3 、 Select the arrangement way from the pop-up menu, and the design image display area will refresh and arrange the items according to the selected order.
  • Page 84 Chapter 6 Memory Design Management 3 、 Click in the memory design management interface to enter the memory design operation selection interface 4 、 Click “Copy Design” to enter its operation interface. The system will automatically provide the smallest available design number and default design name. If the user doesn’t want to change them, please click 5 、...

  • Page 85: Compile Parameter Design

    Chapter 6 Memory Design Management 7 、 Click to carry out the operation and return. Click cancel the copying operation and return. 6.6 Compile Parameter Design This is to change the setting of color-changing order and normal parameters such as scaling up/down and repetition, which is attached to a specific design, so as to create a new design.

  • Page 86: Add Appliqué

    Chapter 6 Memory Design Management 5 、 If don’t use the default values provided by the system, click “New Design number” or “New Design name” and input the new number and name. 6 、 Click to create a new design and return to the design operation selection interface.
  • Page 87 Chapter 6 Memory Design Management function for the design. Secondly, when embroidering to the appliqué point, the machine moves to the offset point (which has to be set) or move the frame out according to the set distance. After patching, once user pulls the bar, the machine will automatically return to the stop point to continue embroidery.
  • Page 88 Chapter 6 Memory Design Management Display Name Description Number List Show the sequence number of the position to set appliqué. Stitch Number Shown the stitch number of the position List Type List The stitch code type C: color-changing code S: stop code Option list Appliqué...

  • Page 89: Make True Design Frame

    Chapter 6 Memory Design Management (which is after “To Offset Point?”.) to . If user chooses moving the frame to a certain distance, first change (which is after “To Offset Point?”.) to , and then click to set the moving-out distance: (2cm to 99cm) or (-2cm to -99cm).
  • Page 90 Chapter 6 Memory Design Management design. 1 、 Click in the main menu to enter the memory design management interface. 2 、 Click to enter the design operation selection interface. 3 、 Click “Combine Design” to enter its operation interface. 4 、...

  • Page 91: Edit Combined Design

    Chapter 6 Memory Design Management 7 、 Click to combine the designs and return to the design operation selection interface. Click to cancel the operation and return. 6.10 Edit Combined Design The combined design (or Packed Design) means a design group combined from several certain (less than 99) memory designs after setting their parameters.
  • Page 92 Chapter 6 Memory Design Management pull the bar for embroidery. The user can also edit the combined design into the common design by the editing function, so as to check and embroider the design. 1 、 Click in the main menu to enter the memory design management interface. 2 、...
  • Page 93 Chapter 6 Memory Design Management Click and then set the color-changing order of the current design in the combined design. The setting interface is in accordance with that in Chapter 4 . 6 、 Click to set several designs for packing. And click to go back to change the parameters of combined designs.

  • Page 94: Compile Combined Design

    Chapter 6 Memory Design Management The system will hint user to input the new design number and the new design name. 8 、 Click to save or click to cancel the operation and return to the design operation selection interface. 6.11 Compile Combined Design The action will help to turn the combined design to normal embroidery design.

  • Page 95: Satin Stitch Adjustment

    Chapter 6 Memory Design Management System asks user to input new design number and new name. 5 、 Click to save or click to cancel the operation and return to the design operation selection interface. 6.12 Satin Stitch Adjustment This operation is to adjust the satin width in the design according to the need. 1 、...

  • Page 96: High-Speed Design

    Chapter 6 Memory Design Management 4 、 Click “Satin Stitch Adjust” to enter its operation interface. 5 、 If don’t use the default values, click the design number and design name to change them. 6 、 Click “X Adjust” and “Y Adjust” to input the new value. 7 、...

  • Page 97: Set Common Parameters For Color-Changing

    Chapter 6 Memory Design Management 1 、 Click in the main menu to enter the memory design management interface. 2 、 Select the design in the memory design image area of the memory design management interface. 3 、 Click to enter the design operation selection interface. 4 、...

  • Page 98: Delete Memory Design

    Chapter 6 Memory Design Management For setting the color-changing and other parameters, please refer to Chapter 4 . 6.15 Delete Memory Design This is to delete one or more designs in the machine memory. 1 、 Click in the main menu to enter the memory design management interface. 2 、...

  • Page 99: Move Frame To Make A New Design

    Chapter 6 Memory Design Management 4 、 The interface is similar to the memory design management interface, in which the designs can also be sorted and previewed. 5 、 Select the design for deletion, click to activate the window, where user can click to delete the design and return to the Other Function interface or can he click...
  • Page 100 Chapter 6 Memory Design Management 2 、 Click in the main menu to enter the memory design management interface. 3 、 Click to enter the design operation selection interface. 4 、 Click “Frame to Make Design” to enter into its operation interface. 5 、...

  • Page 101: Divide Design

    Chapter 6 Memory Design Management 8 、 Click to cancel the setting and return. 6.17 Divide Design By operating this function, one design can be divided into two designs at a designated point. 1 、 Click in the main menu to enter the memory design management interface.

  • Page 102: Clear All Memory Designs

    Chapter 6 Memory Design Management 7 、 Click to split a design into two and return to the design operation selection interface. Click to cancel the setting and return. 6.18 Clear all Memory Designs This function is to clear all the designs in the memory. Be cautious. 1 、...
  • Page 103 Chapter 6 Memory Design Management 4 、 Click to clear all the designs and return to the design operation selection interface. Click to cancel clearing and return. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 104: Chapter 7 Memory Design Edition

    Chapter 7 Memory Design Edition Chapter 7 Memory Design Edition You can edit common designs smaller than 100000 stitches in the memory through this function, or establish a new design. 7.1 Start Design Edition Choose the design for edition in the window of memory design management, and then click In “Other Design Management Functions”, click “Edit Design”...

  • Page 105: Edit Design

    Chapter 7 Memory Design Edition 7.2 Edit Design 7.2.1. General Information 1 、 Stitch information: Information about total stitch amount, serial number, position and type of current stitch. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 106: Document And View Operation Area

    Chapter 7 Memory Design Edition 2 、 Design preview window: preview design. In view, “＋” is used to mark the position of current stitch. The stitch trace of current stitch is highlighted by white color. 3 、 Document and view operation area: For the function of saving design, quitting current operation, looking up the help and zooming the view 4 、...

  • Page 107: Convert Stitch Code

    Chapter 7 Memory Design Edition Move to next color-changing code. Move to previous color-changing code. Move to next jump stitch. Move to previous jump stitch. Move to last stitch. Move to first stitch. Move to the previous or next appointed stitch code. Click the key in centre, user can choose the type of stitch that needs checking.

  • Page 108: Add Stitch Continuously

    Chapter 7 Memory Design Edition When user presses “Only Moves Current Sti”down, the absolute position of all of the stitches behind current stitch will keep still. If that key flicks, the relating position of current stitch and all of the stitches behind it will keep still, which means that, at the same time of moving the current stitch, the absolute positions of stitches behind it are changed correspondingly.

  • Page 109: Chapter 8 Letter Design Operation

    Chapter 8 Letter Design Operation Chapter 8 Letter Design Operation System can generate letter design based on the built-in letter database. 。 8.1 Generate Letter Design Click to enter into design management interface. Click “ ”. Click “Generate Letter Design” to enter letter design parameter input interface. 8.2 Input Embroidered Letter String and Basic Parameters After opening the window of parameter input, user can enter letter input interface automatically.
  • Page 110 Chapter 8 Letter Design Operation Click certain parameter in the list, and then you can input parameter into the window in the right side of interface. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 111: Adjust Letter Design

    Chapter 8 Letter Design Operation Parameters displays at left side of the screen, while the input window is at the right. After user adjusts the value, they also need to click for saving. “String”: the letter list that will be embroidered. “Font”: means letter font for embroidery.
  • Page 112 Chapter 8 Letter Design Operation The operation key is divided into 5 rows in the screen, the first two rows are the function keys for adjusting the arrangement of the letters(for whole rank), the second two rows are the keys for adjusting the selected letters, and the last row are the function keys for the function of view and files.
  • Page 113 Chapter 8 Letter Design Operation “Enlarge": Enlarge to show the detailed part of the letter design. “Reduce”: Reduce to show the window of letter design. “Actual”: Show the letter design in the actual size. At this time, the size of design in interface is equal to actual size.
  • Page 114 Chapter 8 Letter Design Operation “Vertical”: Rank letters vertically “Up Arc”: Rank letters in arc bending upwards “Down Arc”: Rank letters in arc bending downwards "Fix Letter Direction": When user ranks the letters in arc, the letter angle will not change along with the position of arc, but fix at a certain angle “Angle follow”: When user ranks the letters in arc, the letter angle will change along with the position of arc (letters will be vertical to the arc)
  • Page 115 Chapter 8 Letter Design Operation "Extend Letter Interval”: Increase interval between letters "Reduce Letter Interval”: Reduce interval between letters 4 、 Keys for Selecting Letter at Adjustment “Selection Switch”: switch the selected letters. User has to select a certain letter and then to carry out the edition for it. The red “＋” in the center of letter means the letter has been selected .

  • Page 116: Save Letter Design

    Chapter 8 Letter Design Operation “Clockwise Rotation”: Use the letter as centre (“ ＋ ” in the centre of letter), and rotate the selected letter clockwise. “Increase Density”: Increase the stain stitch density of the created letter design. “Reduce Density”: Reduce stain stitch density of the created letter design.
  • Page 117 Chapter 8 Letter Design Operation After the confirmation of the saving, the system will return to the interface of “Adjust Letter Design”. If you don’t want to edit letter design, then press to exit. System will show the following message. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 118 Chapter 8 Letter Design Operation Press to save, or press to return to “Other Design Management Functions”. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 119: Chapter 9 Assistant Operation

    Chapter 9 Assistant Operation Chapter 9 Assistant Operation The user can carry out these functions and perform some normal assistant operation by clicking the keys on the Assistant Operation interface. Click in the main interface to have access to the Assistant Operation interface. Because there are too many assistant functions to list in one interface, you need press page key to turn the page.

  • Page 120: Save Design Start Point

    Chapter 9 Assistant Operation 9.1 Save Design Start Point If the origin of the frame has been set (refer to “Set Frame Origin/ Power-off Protection”, Chapter Chapter ), the machine will save the start position of the current design at the embroidery preparation status or before embroidery.

  • Page 121: Locate Design To Center

    Chapter 9 Assistant Operation 9.3 Locate Design to Center This function is to move frame to position and locate the center of the design to the center of frame software protection that is set by the system, so as to embroider the design at the center of the frame when user presses the start key.

  • Page 122: Move Frame Along Design Border

    Chapter 9 Assistant Operation 3 、 System will display design border information. Click to turn off the window. 9.5 Move Frame along Design Border This function is to move the frame along the design range to check if the design exceeds the limits.

  • Page 123: Embroider Cross

    Chapter 9 Assistant Operation 1 、 Click in the main interface to enter the assistant operation interface. 2 、 Click “Emb along Design Border”. 3 、 System will ask users to confirm operation. Click to confirm or click to cancel the operation. 4 、...

  • Page 124: Embroider Line

    Chapter 9 Assistant Operation Users can set the X/Y length. 4 、 Click System will generate the required data, have access to the embroidery confirmation status and return to main interface. Then the main interface will show . When user presses the start, the machine will embroider the cross.
  • Page 125 Chapter 9 Assistant Operation 3 、 Input the coordinates of the first point in the line. The system will ask the user to input that coordinates in the window. You can use the manual frame-moving key on the panel to move the frame to the start point of the line, and clicks to input the coordinates of the first point.

  • Page 126: Embroider Design Outline

    Chapter 9 Assistant Operation 9.9 Embroider Design Outline System will generate temporary outline data according to the current design. Users can press the Start to embroider. 1 、 Click in the main interface to enter the assistant operation interface. 2 、 Click the key of “Emb Design Outline”. 3 、...

  • Page 127: Needle Down

    Chapter 9 Assistant Operation 1 、 In Embroidery Status, Click in the main interface to enter the assistant operation interface. 2 、 Click the key for setting the offset point. 3 、 Move the frame to the offset point The system will ask the user to move the frame to the offset point and then display the coordinates of X and Y.

  • Page 128: Reset X/Y Displacement

    Chapter 9 Assistant Operation You can click to confirm operation, and then the needle will prick into the cloth. Click to cancel. 4 、 Release cloth, move frame, and then press Enter Users need to release the cloth and move frame to designated point, then click to confirm.

  • Page 129: Reset Total Stitch

    Chapter 9 Assistant Operation 9.13 Reset Total Stitch Clear the total stitch number. 1 、 Click in the main interface to enter the assistant operation interface. 2 、 Click reset total stitch key. 3 、 System set the current embroidered stitch number to 0. User can see total stitch number in the machine statistics.

  • Page 130: Backward Idling

    Chapter 9 Assistant Operation 4 、 System returns to the main interface, press start key to have the frame float the pointed position. Backward Idling 9.14.2. The operations are similar to “Forward Idling”. The only difference lies in is to “press Stop key”.

  • Page 131: Cording Embroidery

    Chapter 9 Assistant Operation 4 、 System will return to the main menu. Pressing the Start will have frame to go to next color-changing code. 9.15 Cording Embroidery Beneath the “Positioning Idling”, the operations are for the cording embroidery. For the machine equipping the cording devices, user can operate the relating devices.

  • Page 132: Chapter 10 Other Functions

    Chapter 10 Other Functions Chapter 10 Other Functions These functions can be used during the usage, including machine maintenance, information inquiry and system settings. Click in the main interface to enter the “Other functions” interface, which is a list of function keys. Pressing these keys is to perform the corresponding functions. The interface is similar to that for assistant embroidery.

  • Page 133: View Statistics Info

    Chapter 10 Other Functions 10.2 View Statistics Info 1 、 Click in the main interface to enter the “Other functions” interface. 2 、 Click “View Statistics Info” 3 、 System will display statistics information interface In the above interface, the statistics information is displayed in a chart. The user can click to clear the value and click to return.

  • Page 134: Set Frame Origin/ Power-Off Protection

    Chapter 10 Other Functions 10.3 Set Frame Origin/ Power-off Protection Setting the frame origin point is the premise for saving the design’s start point and setting frame protection at sudden power-off. So after the installation or maintenance of machine, it’s necessary to set the frame zero point or power-off protection.

  • Page 135: Frame Origin Recovery

    Chapter 10 Other Functions 10.4 Frame Origin Recovery After power-off, if the frame is moved, this operation can be used to restore the frame position when power resumes. The proper performance of this operation is based on the setting on “Set Frame Origin” (Auto set frame origin). Additionally, when sudden power-off takes place in the process of embroidery operation and the frame has not been shifted, users can directly press the start key to continue embroidering after power resumes.

  • Page 136: Change Language

    Chapter 10 Other Functions Use the move frame key on panel to move the embroidery frame, confirm the upper-right corner point of soft limit position and click to confirm it. 5 、 Move frame, input coordinate of bottom-left corner of soft limit position. Use the move frame key on panel to move the embroidery frame, confirm down-left corner point of soft limit position and click to confirm.

  • Page 137: Machine Authorization Management

    Chapter 10 Other Functions Click the language you want; system will go to the language changing interface. 10.7 Machine Authorization Management Note: The section is fit for the machine having password-protected function. For a convenient machine management, the common user can't have access to the setting of all parameters;...

  • Page 138: Disable/Change Admin Password

    Chapter 10 Other Functions If machine administrator or the factory customer need modify the parameters after setting the password, they must input the password first, and then they can change the parameters. They can also change the password, save or recover the parameters here. Disable/Change Admin Password 10.7.1.

  • Page 139: Admin Unlock

    Chapter 10 Other Functions The administrator needs to input the old password and new password that need to be establish one by one in order, the factory will tell the administrator the system default password. The figure number of the new password must be between 4-9. For preventing the mistake operation of customer, the system will request user to input new password twice and without any difference.

  • Page 140: Save/Recover Admin Optimum Parameters

    Chapter 10 Other Functions System will ask users to input password. 3 、 Administrator input password After administrator inputs the password, the system will be unlocked. Then customers can modify the machine application parameters. Save/Recover Admin Optimum Parameters 10.7.3. Procedures ： 1.
  • Page 141 Chapter 10 Other Functions 2 ） Click "Machine Authorization Management ". Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 142 Chapter 10 Other Functions 3 ） Click "Save Admin Optimum Parameters " 4 ） When system asks "Save the admin’s machine parameters?", please press " ". Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 143 Chapter 10 Other Functions After above operations, the Admin optimum parameters will be saved. For recovering the admin optimum parameters, user needs follow the procedure at below. 2. Recover Admin Optimum Parameters 1 ） At main interface, press " " to enter the machine parameter management interface.
  • Page 144 Chapter 10 Other Functions 3) Click "Recover Admin Optimum Parameters". 4) When system asks "Recover the admin’s machine parameters?", please press " ". Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 145: Change Factory Password

    Chapter 10 Other Functions After the above operations, the values of the basic parameters of machine will be recovered to the original status, and the machine can work normally again. Change Factory Password 10.7.4. Machine factory customers can modify all the parameters. When machines get off the production line, the machine is in unlocked status.
  • Page 146 Chapter 10 Other Functions 1) At main interface, press " " to enter the machine parameter management interface. 2) Click "Machine Authorization Management ". Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 147 Chapter 10 Other Functions 3) Click “Save All Parameters To Disk” 4) When system says "Insert Disk To Save All Parameters", please insert the USB and then press " ". Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 148 Chapter 10 Other Functions 5) When system displays “Success to save all parameters to file "DH-PARAM.TXT”, the update is successful. After the above operations, user can update the machine. After the update, user needs to repower the computer. After the initialization of system, the parameters are be recovered. 2.
  • Page 149 Chapter 10 Other Functions 2) Click "Machine Authorization Management ". Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 150 Chapter 10 Other Functions 3) Click “Load Parameters From Disk” 4 ） When system says "Insert Disk To Load Parameters", please insert the USB and then press " ". Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 151: Initialize Machine Parameters

    Chapter 10 Other Functions 5) When system displays "Fail to read all parameters,fils not existed or changed., the loading is successful. After the above operations, the value of the basic parameters of the embroidery machine will be recovered to the status before the update, and the machine can be used normally. Initialize Machine Parameters 10.7.7.

  • Page 152: Machine Information

    Chapter 10 Other Functions 3 、 If the factory password had already been set(but hadn’t been decoded), and the embroidery factory administrator password had been decoded (or had not been set at all), the initialization would turn the machine parameter managed by factory to value saved by factory, the other parameters would be turned to default value saved by system.

  • Page 153: Debugging Machine

    Chapter 10 Other Functions This function will help users to check u machine software information. Click to exit. 10.9 Debugging Machine This operation is only for the repairman, the ordinary operators are banned to use these operations. Because these operations involve some mechanical works, please attach attention to the personal safety and equipments security at operation.

  • Page 154: Date And Time

    Chapter 10 Other Functions Test Thread-breakage Detection Test Needle Position Test Upper Thread-holding Test Sequin Device Action Test Zigzag Motion Test Taping Presser Action Debug Sequin Device Test Touching Panel 10.10 Date and Time In date and time interfaces, the customer can check and modify the date and time in system.
  • Page 155 Chapter 10 Other Functions During the process of correction, a lot of crosses will appear on the screen. Users should click the center of them. System receives the data of those points and saves them as standard data for correction. Click to exit.

  • Page 156: Chapter 11 About Jf Sequin Embroidery

    Chapter 11 About JF Sequin Embroidery Chapter 11 About JF Sequin Embroidery 11.1 Brief of Sequin Embroidery Sequin embroidery is formed by many sequins and the specific stitch form. Because the sequins are made of the hard and shining material with smooth surface, the sequin embroidery, formed by the sequins with different colors, shapes and sizes, features the unique shining effect.

  • Page 157: Embroidery Procedure Of Sequin

    About JF Sequin Embroidery Chapter 11 direction. Lever ： The core part for feeding the sequins within this device is a lever mechanism, which will send the sequins to their positions with its alternating motion. 2 、 Separate action of sequin-mending and sequin-feeding device; 3 、...

  • Page 158: Edit Sequin Design

    Chapter 11 About JF Sequin Embroidery needed. After selecting design for input, user needs press to have access to the design input interface as shown in below: Setting procedures: User should input number and name of pattern. In the column of “Is multi-sequin design”, user needs select an import way.
  • Page 159 About JF Sequin Embroidery Chapter 11 1. Press in the main interface to enter the “Design Management” interface 2. Press direction keys to select sequin design for edition. Click “ ”, “Edit Design”, “Edit Sequin Setting of Current Design” in order to enter the “Edit Design” interface. Display design in the center;...
  • Page 160 Chapter 11 About JF Sequin Embroidery 5. Click to shift the current stitch mode between “navigating by position” and “navigating by stitch number”. “navigating by position”: when you press direction keys, the next stitch code in that direction will be selected, regardless at its stitch number.
  • Page 161 About JF Sequin Embroidery Chapter 11 Move the cursor to a stitch position, then click “Set Range Start Stitch” to set （1） the current stitch as the start stitch of this area. Move the cursor to a different stitch position, then click “Set Range End Stitch”. The area for setting is from the start stitch to end stitch.
  • Page 162 Chapter 11 About JF Sequin Embroidery 8. Edition of Alternating Sequin If you want to use the alternating sequin, you should define a range for using them at first. In “ ”, use “Set Range Start Stitch” and “Set Range End Stitch” or “Select Current Color Range”...
  • Page 163 About JF Sequin Embroidery Chapter 11 Setting method: a) Click to select sequin mode and click to confirm. Sequin names are A, B, C and D. If all these four sequins are included, A will be on the top, then B, C and D. b) After that, press to confirm the sequin-feeding mode.
  • Page 164 Chapter 11 About JF Sequin Embroidery 9. Save When you finish the edition, click to save the design. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 165: Setting Of Multi-Sequin Embroidery Parameters

    About JF Sequin Embroidery Chapter 11 Input design number and name, then click to save the edited sequin design, or click to cancel the saving. 11.5 Setting of Multi-Sequin Embroidery Parameters In this section, we will introduce how to adjust sequin device and the parameters used in multi-sequin embroidery.
  • Page 166 Chapter 11 About JF Sequin Embroidery 2 、 L/R Sequin Feeding Angle Adjustment This parameter is to adjust the sequin-feeding angle. 3 、 Auto Start for Sequin When the setting is “Yes”, system will start embroidering sequin automatically. When the setting is “No”, machine needs manually start at sequin embroidery. 4 、...

  • Page 167: Change Color Order And Set Sequin Mode

    About JF Sequin Embroidery Chapter 11 12 、 Beam-breakage Detection Sen. This parameter is used for the beam embroidery device. “0” is to turn off the sensitivity, the range of this parameter is 0~10. The smaller value means the higher sensitivity of the detection device.
  • Page 168 Chapter 11 About JF Sequin Embroidery 1. Click in the main interface ， then click “ ” to enter color-changing order interface. 2. Click number key to set color-changing position. If the first/last needle position is the multi-sequin device. After user clicks that key, the system will ask for setting the sequin delivery mode;...
  • Page 169 About JF Sequin Embroidery Chapter 11 Procedure for Setting Sequin-feeding Mode ： a) Press number key to confirm embroidery needle position. The needle position equipping sequin device will display “Sequin Mode”; b) Use to modify the delivery mode and press to confirm.
  • Page 170 Chapter 11 About JF Sequin Embroidery d) Use until you see “END” in “Sequin mode”, then press to confirm and save the settings. Clicking is to keep the sequin mode before the edition. For example: a machine with needle No. 9 as its end needle (tri-sequin at 3, 5, 7mm); first needle is single sequin (9mm).

  • Page 171: Manual Operation Of Sequin Embroidery

    About JF Sequin Embroidery Chapter 11 ④ Click until “C” appears, then click ⑤ Click “1”, then click ⑥ Click until “End” appears, then click to finish the setting. ① Click 9 to activate the interface for setting sequin-feeding mode; ②...

  • Page 172: Debugging Multi-Sequin Embroidery

    Chapter 11 About JF Sequin Embroidery (2) In the main interface, click one by one, then select “sequin end” to lift all the presser feet; (3) In the main interface, click one by one, then select “send sequin”; the activated machine heads will send a sequin at each clicking (with presser foot at down position).
  • Page 173 About JF Sequin Embroidery Chapter 11 (3) Manual Operation for Rear Motor Sending C Sequin Put the sequin switch to the down position, dial the thread-breakage detection switch to turn off the head indicator (dial it to down position too) and press manual sequin-feeding button.

  • Page 174: Sequin Mending

    Chapter 11 About JF Sequin Embroidery 11.9 Sequin Mending After the thread breaks or the red thread-breakage detection indicator is turned on manually, press the stop key to retreat and have the system enter the mending status. At mending status, the sequin devices will go up and the machine will return and stop at the mending point.

  • Page 175: Chapter 12 Operation Of Zigzag Embroidery

    Operation of Zigzag Embroidery Chapter 12 Chapter 12 Operation of Zigzag Embroidery 12.1 Functions 1 、 Zigzag Embroidery (ZIG Embroidery): this function is to make the thread form the design with certain stitch forms, which have been saved in the computer in advance, the Z4 and Z5.
  • Page 176 Chapter 12 Operation of Zigzag Embroidery 2. Left Zigzag Device: Y (N) —— Y means the last needle is the zigzag embroidery position. 3. Zigzag Device Move Time: 2 (Default Value) —— User should set this value according to the actual action time of zigzag device. 4.

  • Page 177: Relative Operations Of Zigzag Embroidery

    Operation of Zigzag Embroidery Chapter 12 12.5 Relative Operations of Zigzag Embroidery Shift between Flat Embroidery Position and Zigzag 12.5.1. Embroidery Position (1) Manual Shift In the main interface, press the key to enter into color-changing interface. “1” is for zigzag embroidery, others are for non-zigzag embroideries. Press the number to activate the corresponding needle position.
  • Page 178 Chapter 12 Operation of Zigzag Embroidery Definition of icons: Normal Embroidery ； Z4 Embroidery: The rod swings at each stitch. Z5 Embroidery: The feature of it is same to Z4. It is suitable for the thick thread. (Refer to the parameter: Swinging scope of frame in Zigzag sewing) (2)Automatic Shift Before embroidering, automatic shift can be achieved through setting the color-changing position.
  • Page 179 Operation of Zigzag Embroidery Chapter 12 Press the corresponding icon to select the very zigzag embroidery mode, if you don’t want to change, and then press to exit. After confirmation of the embroidery mode and the setting of color-changing order, the system will display as below: Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 180: M Axis Operation Of Zigzag Embroidery

    Chapter 12 Operation of Zigzag Embroidery The icon means the manual shift status. But the setting in will still be in effect when system is in automatic shift state. M Axis Operation of Zigzag Embroidery 12.5.2. The operations about M axis contain “M axis to be ready”, “M axis to cycle” and “M axis to turn”, which are all in the Assistant Functions.

  • Page 181: Chapter 13 Online Update Of Main Software

    Online Update of Main Software Chapter 13 Chapter 13 Online Update of Main Software Update Procedure ： 13.1 Update of Upper Machine 1 、 Hold “3” Task Shift key and turn on the machine. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 182 Chapter 13 Online Update of Main Software 2 、 The screen shows the following picture, select the “Updating Data Program” 3 、 Select the “Updating from USB” Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 183 Online Update of Main Software Chapter 13 4 、 Click “Disk”. 5 、 Select the software for update after having access to the interface. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 184 Chapter 13 Online Update of Main Software 6 、 Press Enter to confirm updating. 7 、 The screen will show “Updating Complate , if not others , Pls repower” when finish updating. Please restart the computer. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 185: Update Of Turn-On Interface

    Online Update of Main Software Chapter 13 13.2 Update of Turn-on Interface 1 、 Hold “3” Task Shift key and turn on the machine. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 186 Chapter 13 Online Update of Main Software 2 、 The screen shows the following picture, select the “Update Power on Display”. 3 、 Select the “Updating from USB” Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 187 Online Update of Main Software Chapter 13 4 、 Click “Disk” 5 、 Select the software for update after having access to the interface. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 188 Chapter 13 Online Update of Main Software 6 、 Press Enter to confirm updating. 7 、 The screen will show “Updating Complate , if not others , Pls repower” when finish updating. Please restart the computer. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 189: Lcd Parameter Update

    Online Update of Main Software Chapter 13 13.3 LCD Parameter Update 1 、 Hold “3” Task Shift key and turn on the machine. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 190 Chapter 13 Online Update of Main Software 2 、 The screen shows the following picture, select the fifth “LCD Parameter update” 3 、 System will ask user whether to “Display Supported LCD ID?” （ 1 ） Click to check the supported LCD type. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 191 Online Update of Main Software Chapter 13 （ 2 ） Click to have access to the interface for selecting update method, select “Updating from USB” Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 192 Chapter 13 Online Update of Main Software 4 、 Click “Disk” 5 、 Select the software for update after having access to the interface. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 193 Online Update of Main Software Chapter 13 6 、 Press Enter to confirm updating. 7 、 The screen will show “Updating Complate , if not others , Pls repower” when finish updating. Please restart the computer. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 194 Chapter 13 Online Update of Main Software After the update, user needs to initialize the parameters (The “Set Machine Para.” is at the first page of “Assistant Management”.); repower the computer after the initialization and then reset the parameters. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 195: Chapter 14 Update Of Software In Peripheral Board

    Update of Software in Peripheral Board Chapter 14 Chapter 14 Update of Software in Peripheral Board Update Procedure ： 1 、 Have access to the menu and click 2 、 Select “Update peripheral board Software” Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 196 Chapter 14 Update of Software in Peripheral Board 3 、 Input the password and click Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 197 Update of Software in Peripheral Board Chapter 14 4 、 Select “USB Disk”. 5 、 Select the program for update and then click Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 198 Chapter 14 Update of Software in Peripheral Board 6 、 When system displays “peripheral board program update window”, please click 7 、 When system displays “Successful”, the update is finished. Owner’s Manual of BECS- 185 Computerized Control System...

  • Page 199: Appendix 1 Parameter List

    Appendix 1 Parameter List Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks Common Parameters X&Y Scales 100/100 50%~200% Scale ratio of design in X /Y direction Rotate 0~89 Rotating angle of the design Direction Prior Mode Rotate Rotate, Scale Rep.
  • Page 200 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks Display Automatic Jump No, Yes The same to above Auto Jump Stitch 8.0mm 6.0mm~12.0mm The same to above Thread-breakage Detection Parameters T. B. Detect No, Yes Sti. Not T.B. Detect 8 stitch 0 stitch ~15 stitch Stop machine after...
  • Page 201 (All-servo type machine), 3.0~ longer than the set value, the high speed 6.0 (high-speed machine will lower the speed. machine) machine using Dahao servo-motor driver) Jump Stitch Speed 400~750(common Set the rotation speed for jump type machine), 400~ stitch. 1100 (high-speed...
  • Page 202 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks Jump Length of Trim 1 is the minimum length and 8 are the maximum length. Speed When 80,90,100,…,250 Trimming Lock Stitch. When No, Yes Trim Slow Stitches After 2 stitch 1 stitch ~7 stitch Trim...
  • Page 203 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks Motor Number of R No,1~4,1(2~4) Set the parameter base on Sequin sequin device. 2~4 mean device number driven by one motor One-way 6~40 steps; Sequin Double-ways 6 ～ 40 steps One-way 6~40 steps;...
  • Page 204 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks motor One-way 6~40 steps; Sequin Double-ways 6 ～ 40 steps One-way 6~40 steps; Sequin Double-ways 6 ～ 40 steps One-way 6~40 steps; Sequin Double-ways 6 ～ 40 steps Set 6.75MM of L One-way 6~40 steps;...
  • Page 205 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks A-Zig Emb. On/Off Time A-Zig Swing Angle 0 ～ 90 Generally, please set it above A-Zig Max Speed 300 ～ 1000 A-Zig Has Yes, No Loosing-Motor A-Zig T.L Adj 0 ～...
  • Page 206 Appendix 1 Parameter List Name of Parameter Default Value Range of Value Remarks Server IP It is used for setting the IP address sever when connected to PC. Subnet mask It is used for setting the subnet mask of IP address when connected to PC.

  • Page 207: Appendix 2 Directions Of U Disk Operation

    Appendix 2 Directions of U Disk Operation Appendix 2 Directions of U Disk Operation Operations Methods or Standards Remarks USB I/O Same as floppy disk Operation priority between USB USB Disk disk and floppy disk Format supported by USB disk FAT16 and FAT32 Support long file name Support, but not displayed...

  • Page 208: Appendix 3 Error List

    Appendix 3 Error List Appendix 3 Error List Note: for the errors listed below, you may click “Clear” to check related parts. Follow the instructions at below. If the machine has no password-protected function, please omit the items relating to password at below: Error Number Error Solutions...
  • Page 209 Appendix 3 Error List Error Number Error Solutions No floppy disk Invalid disk type Disk sector error File not in disk Not a file File corrupt Disk write protect Turn off write protect switch Invalid directory Select the right path File existed! Rename it Directory is full in memory.
  • Page 210 Appendix 3 Error List Error Number Error Solutions to100 degree. Then adjust “Set Break Para.” EC13 Frame over limit Because the parameters “Set Frame Soft Protection” has been set and it is over the set range at moving the frame, user can release this parameter according to the situation.
  • Page 211 Appendix 3 Error List Error Number Error Solutions connection between E918X and the encoder plug of main shaft motor. 4. Check whether the driver of E918 is broken. EC21 Change clr overlimit Check whether color-changing rheostat damaged, and the whether the setting of “Needles”...

  • Page 212: Appendix 4 Method For Making Special Multi-Sequin Design

    For instance, it can not recognize it’s a sequin A or B at one stitch position. Dahao special multi-sequin design making is to add a few jump stitch codes after the original sequin code （ jump stitch or stitch length is less than 0.1mm ）...
  • Page 213 Appendix 4 Method for Making Special Multi-sequin Design 2 、 Making Motif for Multi-sequin By using the function of making motif, we can easily input sequin or sequin combinations, including: A, B, A+B, C, A+C, B+C, A+B+C, D, A+D, B+D, A+B+D, C+D, A+C+D, B+C+D, A+B+C+D, etc.
  • Page 214 Appendix 4 Method for Making Special Multi-sequin Design have to add another sequin on the basis of the above procedure, as shown in below:. Continue to input other single-stitches, as shown at below: Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 215 Appendix 4 Method for Making Special Multi-sequin Design You can see “stitch list” shows 2 sequins as in the following image. Select all stitches. Make the motif. Set the group as JP, name as JP-B Input two reference points. 3 、 For using single needle to make multi-sequin design, you can use “...
  • Page 216 Appendix 4 Method for Making Special Multi-sequin Design motif -> apply ” . Then use “ manual stitch ” to finish entering, as shown in below: 4 、 At making multi-sequin, others (curve) can apply motif too. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 217 Appendix 4 Method for Making Special Multi-sequin Design 1) Click sequin button to enter “sequin state” (this is to ensure all the curve is covered by sequin). Input the curve as the following picture. 2) Select the target. 3) Set the “target properties” and select the corresponding motif. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 218 Appendix 4 Method for Making Special Multi-sequin Design 4) “Multi-sequin” input is finished. Owner’s Manual of BECS- 185 Computerized Control System...
  • Page 219 Appendix 4 Method for Making Special Multi-sequin Design 5 、 Make Alternate Sequin This is to realize the alternative embroidery of different sequins. For instance, A1B1 embroidery is to realize the embroidery effect of A, B, A, B… 1) Firstly, you should design the alternating motif, as the following A1B1 alternating design: 2) Apply the above motif in the design to achieve the alternating of A1B1 sequin, as shown in below:...
  • Page 220 3MM-A & 4MM-AB, which achieves embroidery effect of A, AB, A, AB… 7 、 Normal sequin design to Dahao special sequin design According to the above rules, we just need to insert some jump stitches after “sequin code” to change the original sequin code to “multi-sequin code”.
  • Page 221 Appendix 4 Method for Making Special Multi-sequin Design 1) If you want to change the first sequin code to A+B sequin code, you need to locate to that stitch first (Its character is to put down the sequin). 2) Right click “insert jump stitch” twice to insert two jump stitches after the original sequin code.

  • Page 222: Appendix 5 Network Function Of Embroidery Machine

    Appendix 5 Network Function of Embroidery Machine Appendix 5 Network Function of Embroidery Machine How to Make Ethernet Cable 1.1 Method of Making Straight-through Cable The pins in the two terminals of twisted-pair cable have to be in one-to-one correspondence. If the first pin of one terminal is green, the first pin of the other terminal must also be green.
  • Page 223 Appendix 5 Network Function of Embroidery Machine connected to the corresponding pins. Cable made in this way is called “crossover cable”. Pin Number Corresponding Pin Number Pin Color Green & white Green Orange & white Blue Pin Number Corresponding Pin Number Pin Color Blue &...
  • Page 224 Appendix 5 Network Function of Embroidery Machine digits of MAC address must be zero. 2.2 IP address 1 ） Definition of IP address IP also called Internet address, which is the logic address for solely marking the computers in internet. Every computer in the internet relies on the IP address to mark itself.
  • Page 225 Appendix 5 Network Function of Embroidery Machine Network Network Number Computer Number 192.168.1 192.168.1 192.168.1 192.168.1 192.168.2 192.168.2 192.168.2 192.168.2 2.3 Subnet mask To show how the network number and computer number are divided, subnet mask is used to tell in one IP address which part is for network and which part is for computer. It’s regulated that “1”...
  • Page 226 Appendix 5 Network Function of Embroidery Machine Otherwise computers don’t know where to deliver the data package. The ways to construct network 3.1 One PC directly connected to one embroidery machine In this situation crossover cable is used to link the network interface of PC and the network interface of embroidery machine.
  • Page 227 Appendix 5 Network Function of Embroidery Machine 3.3 Connect the two networks in “ 2 ” through router Setting the network parameters of embroidery machine 4.1 MAC address of embroidery machine Set MAC address of NIC of embroidery machine. Each embroidery machine has its sole address.

  • Page 228: Appendix 6 Automatic Limits Function

    Appendix 6 Automatic Limits Function Appendix 6 Automatic Limits Function for Cloth Embroidery/ Cap Embroidery 1. Working Principles The automatic limits function is to use the X-/Y+ limits coupler as the origins. The system will determine the embroidery range of that frame according to the frame size and the distance between the origin and the set frame center (Unit: mm).
  • Page 229 Appendix 6 Automatic Limits Function Select “Power-off Frame Protection/ Frame Origin” to enter the interface for setting the frame origin ： Select “Auto Frame Origin” and then click “Confirm”. At this moment, the frame will automatically find the origin and confirm it. (Note: when the limits coupler is damaged, user can use “Manual Frame Origin”...
  • Page 230 Appendix 6 Automatic Limits Function There are four parameters in the Cloth Frame Type. “X Center” is the distance from the frame center to the X- limits coupler; “Y Center” is the distance between the frame center and the Y+ limits coupler; “X Frame Size” is the available embroidery range in X direction; “Y Frame Size”...
  • Page 231 Appendix 6 Automatic Limits Function “X Frame Size” and “Y Frame Size” should be set according to the frames actually used. Attention: because usually the cloth frame is not the rectangle, this parameter value shall be set according to the available embroidery range of the frame in actual. We can take the picture at below as the reference: X/Y Center (X,Y) can be figured out from the calculation and measurement.
  • Page 232 Appendix 6 Automatic Limits Function “X Center” X = A － L ／ 2 ； “Y Center” Y = W ／ 2 － B ； Fill the X and Y into the form as the X/Y Center for Cloth Frame A. (3) Parameter Adjustment Due to the error at measurement, the calculated coordinate may be not so accurate.
  • Page 233 Appendix 6 Automatic Limits Function Synchronization Status At present, in the controller, we have preset 9 kinds of cloth embroidery frame for user, which is in the parameter “Cloth Frame Type A/B/C/D/E/F/G/H/I”. These nine frame types can be set in “Frame Selection” within “Frame Parameter 2” when user needs replace the frame. 3.
  • Page 234 Appendix 6 Automatic Limits Function Set the “Cap Embroidery Type J” as “0/0/0/0”, then select “Cap Type J (0X0)” in “Frame Selection”. After the confirmation, the frame should be moved to the absolute origin. Then measure the Distance E (from frame edge to the X guide stand edge). Cap Frame: “X Center”...
  • Page 235 Appendix 6 Automatic Limits Function In the above picture, C is the preserved distance, which users can set according to their devices. B is the available range of cap frame for embroidery in the Y direction. “Y Center” Y = A － C － B ／ 2 。 Input the “X Center”...
  • Page 236 Appendix 6 Automatic Limits Function 5. Size of Frames for Cloth Embroidery (Unit: mm) Cloth Embroidery Frame A ： Cloth Embroidery Frame B ： Size ： 550×375 Size ： 290×290 Range ： 430×260 Range ： 230×230 Cloth Embroidery Frame C ： Cloth Embroidery Frame D ：...

Table of Contents

Save PDF