Sami WS-2304 User Manual

Wearable

Table of Contents

Download this manual

Thank you for purchasing the Sami WEARABLE WS-2304. Read the instructions carefully to obtain optimum results and preserve it for

future reference.

Compatibility

Compatible with Android/iPhone.

*Compatible with android versions up to 5.1.With future versions support is not guaranteed.

Function Icon.

1. Time and date function

2. Sensor G

3. This wearable can be paired to your smart phone by Bluetooth. The version of the Bluetooth is V 4.0.

4. The wearable can be used only in vibration mode.

5. Identification of incoming calls (vibrate and name of contact).

6. Message alert (vibrate and name of contact).

7. Permits you to check Whatsapp or any PUSH messages (vibrate and name of contact).

8. Facebook notifications (vibrate mode).

9. Built in alarm clock.

10. Pedometer (steps, calories, distance).

1. Charge:

Please charge the bracelet for 30minutes before using. Pull out the host as below picture. Insert the host to a 5V/1A USB port for

charging. The red indicating light stops flashing when it is full charged after 30 minutes.

* Note: The guarantee does not cover incorrect mounting and dismounting of the wearable.

WEARABLE

User Manual

WS-2304

Table of Contents

Do you have a question about the WS-2304 and is the answer not in the manual?

Page 1 WEARABLE User Manual WS-2304 Thank you for purchasing the Sami WEARABLE WS-2304. Read the instructions carefully to obtain optimum results and preserve it for future reference. Compatibility Compatible with Android/iPhone. *Compatible with android versions up to 5.1.With future versions support is not guaranteed.
Page 2 2.Install APP: Go to App store or Google play store, download APP: “Zeroner” and install it. To use Zeroner APP, make sure your mobile device connected with internet via Mobile network or WiFi. 3.Account set-up: Run the “Zeroner” App. Log in if you have an e-mail account, or register a new account. You will be required to enter your password as well to initiate the session.
Page 3 “Help” option on APP. 5.Pairing: Keep your phone with Bluetooth and WIFI “on” for this step. 1). Log in the App Zeroner, show the main 2).Double press the bracelet touch screen ,the page. Tap the top left corner button or slip radar icon “...
Page 4 will take 1-2 minutes to SYNC data for first time. SYNC data can be done manually by clicking the refresh button on APP too. 7.Sleep monitor Start Sleep Mode：the bracelet will distinguish if the wearer is sleep or awake every day time 20:00 to 09:00, if the wearer sleep, then the bracelet will start sleep monitor mode automatically, the icon show up.