User Manual of DVR6100V-H Series DVR
10.
Click Search to search IP Camera. Click Add to add IP Camera (only supported by HDVR series).
11.
After finishing IP Camera settings
12.
Click Next button to enter the Record Settings window, as shown in Figure 2.9.
1)
Select the camera to configure.
2)
Check the checkbox to enable Start Recording.
3)
Select the recording mode to Normal or Motion Detection.
4)
Click Copy to copy the record settings of the current camera to other camera (s) if needed, as
shown in Figure 2.10.
5)
Click OK to return to the Record Settings window.
13.
Click OK to complete the startup Setup Wizard.
, c
lick Next to enter the Record Settings window.
Figure 2.9 Record Settings
Figure 2.10 Copy Record Settings
22