BT BT1200 Quick Setup And User Manual page 5

2 Activate the batteries
1. Activate the batteries by pulling
the plastic tab away from the
back of the handset.
2. The handset will check for a
link with the base station.
Once found, the screen will
show the handset name i.e.
HANDSET 1.
Press the Left option button
to set up date and time. You can press the Right
option button
until setup is complete (you can always set these
up later).
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
Rechargeable batteries
and charge batteries
for 16 hours before use.
HANDSET 1
on the handset
to skip any further options
Talk/Standby time
Under ideal conditions, the
handset batteries should give
up to 10 hours talk time or
100 hours standby on a single
charge.
Please note that new Ni-MH
rechargeable batteries don't
reach full capacity until
already fitted
they've been in normal use
Remove this tab
for several days.
Battery low warning
The
hear a warning beep every
minute, to indicate that you
need to recharge your handset
before you can use it.
If the battery charge completely
runs out, you must recharge the
handset batteries before you
can use the handset. Place the
handset on the base or charger
to charge.
When a handset is charging
from a low charge, the display
shows four characters scrolling
in a circle on the bottom line of
display.
Quick set-up guide Quick set-up guide
icon will flash, you'll
5 5