Zte zpad User Manual page 53

1. Touch >
2. Slide the Wi-Fi switch to the On position.
3. Touch > Saved networks.
4. Touch the Wi-Fi network name and then touch FORGET.
Adjust Advanced Wi-Fi Settings
1. Touch >
2. Touch > Advanced to adjust the following settings.
Network notification: Get notifications in the status bar when Wi-Fi is on and an

open network is available.
Scanning always available: Allow some services to scan for networks even when

Wi-Fi is off.
Keep Wi-Fi on during sleep: Set whether to keep Wi-Fi on in sleep mode.

Install certificates: Install certificates needed for connecting to certain Wi-Fi

networks.
Wi-Fi Direct: Use the Wi-Fi Direct feature. See

WPS Push Button: Connect to a WPS network via the push button method.

WPS Pin Entry: Connect to a WPS network via the device PIN method.

MAC address: Check the MAC address.

IP address: Check the device's IP address.

Settings > Wi-Fi.
>
Settings > Wi-Fi.
>
Using Wi-Fi Direct
53
®
.