Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ARCTICO ULUF 450
Summary of Contents for ARCTICO ULUF 450
- Page 1 OPERATING INSTRUCTIONS ULUF 450/850...
-
Page 2: Table Of Contents
INDEX ................PAGE Before using the appliance . -
Page 3: Before Using The Appliance
IMPORTANT Before using the appliance For safety reasons, the instructions should be read before the appliance is commissioned. The operating instructions should always be available and accessible to personnel! • Low Voltag Directive 73/23/EEC. • Electromagnetic Compatibility Directive 89/336/EEC. • Only use the freezer for its specific purpose. -
Page 4: Installing The Freezer
Appliance with flammable refrigerant: As the appliance contains a mixture of refrigerants, which are flammable, it is essential to ensure that the refrigerant pipes are not damaged. Operating Instructions For safety reasons these operating instructions should be read before the freezer is commissioned. The operating instructions should always be available and accessible to personnel! The drawings and symbols in these operating instructions are for safety purposes when commissioning and using the freezer. -
Page 5: Before Commissioning
Warning Regulations require that this appliance be earthed: The manufacture declines all liability for injury to persons or animals and for damage to property resulting from failure to observe the above procedures and reminders. If the socket and plug are not of the same type either the socket or the plug must be replaced by a qualified electrician. -
Page 6: Control Panel
Control Panel Up, down, left, right button to scrolls through the menu On/off or exit menu Enter (accesses the menu, accept) Mute alarm Alarm (red light) Description control panel for user Screen At alarm Main menu Current alarm Non current alarm(s) Temp. -
Page 7: Description Control Panel For Engineer
Description control panel for engineer Screen Main menu At alarm Temp. Last 24H max/min Settings level l password Settings level ll password ll Hysteresis Range Max temp limit 13 Hysteresis Min temp limit The difference between the set point and the temperature that causes the fan and the compressor to restart. -
Page 8: Default Settings
Default settings: Description Dairei default Customer settings setting 0000 LEVEL I (password) Set point Freezer Power failure Freezer 01 (on) High temp alarm Freezer Low temp alarm Freezer Door open alarm Freezer Probe/eprom failure Freezer Alarm Delay Freezer Alarm log Freezer Description Dairei default... -
Page 9: The Cooling System
The cooling system The vaporiser is built into the shelves of the inner container. They will be approx. -85°C, so there is a risk of frostbite if they are touched. Always use thermal gloves when touching the contents of the freezer. The condenser is placed on top of the cabinet behind the control panel. -
Page 10: Cleaning And Maintenance Of The Freezer
Cleaning and maintenance of the freezer: • Ice will form on the inner doors of the freezer. This ice should be removed with a scraper at regular intervals. (Remember safety gloves). • Ice on the inside of the cabinet should be removed as required. Take the contents out of the freezer. Pull out the plug and leave the door open until the ice can be removed. -
Page 11: Wiring Diagram
Wiring diagram... - Page 12 WWW.ARCTIKO.COM LAMMEFJORDSVEJ 5 DK-6715 ESBJERG N DENMARK TEL. +45 70 20 03 28 +45 70 20 03 29 INFO@ARCTIKO.COM 50 80 013-02-GB WWW.ARCTIKO.COM...
Need help?
Do you have a question about the ULUF 450 and is the answer not in the manual?
Questions and answers