Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for BTSTAR TECHNOLOGY HEIMDALL
- Page 1 Heimdall Installation & Operation Manual BTStar Technology Co.,Ltd 3F., No.47, XiKeng Road, FuCheng Street, LonHua New District, ShenZhen, China Tel: (86-755) 2980 2980 Fax: (86-755) 2980 2985 E-mail: sales1@sunitec.com.tw Wed Site: www.bt-star.cn...
-
Page 2: Table Of Contents
RESET 6. Device page -------------------------------------------------------------------13 Specification: Package Content: 7. Inclusion Page ----------------------------------------------------------------14 Protocol: Z-Wave™(Heimdall) 1pcs : Heimdall Gateway Frequency Range: 8. Exclusion Page ----------------------------------------------------------------16 1pcs : Installation & Operation Manual 865.2MHz (Heimdall-IN) 868.4MHz (Heimdall-EU) 1pcs : AC/DC Adapter(5V/1A) 868.4MHz (Heimdall-CN) 1pcs : USB A to Micro USB Cable 869.0MHz (Heimdall-RU) -
Page 3: Icon And Command Classes
COMMAND_CLASS_DOOR_LOCK COMMAND_CLASS_MANUFACTURER_SPECIFIC COMMAND_CLASS_METER Humidity Siren COMMAND_CLASS_MULTI_CHANNEL COMMAND_CLASS_MULTI_CHANNEL_ASSOCIATION COMMAND_CLASS_MULTI_CMD COMMAND_CLASS_SENSOR_MULTILEVEL Temperature Flood COMMAND_CLASS_SWITCH_MULTILEVEL COMMAND_CLASS_NO_OPERATION COMMAND_CLASS_NOTIFICATION Glassbreak Smoke COMMAND_CLASS_POWERLEVEL COMMAND_CLASS_SECURITY COMMAND_CLASS_THERMOSTAT_FAN_MODE COMMAND_CLASS_THERMOSTAT_MODE Gateway Unknown COMMAND_CLASS_THERMOSTAT_SETPOINT COMMAND_CLASS_USER_CODE COMMAND_CLASS_VERSION COMMAND_CLASS_WAKE_UP Repeater Color control If Heimdall receives a Basic Command, it will ignore the command. -
Page 4: Connection
A. Connect Heimdall with WiFi router through an Ethernet cable. B. Plug in power supply. C. Mobile phone connects to WiFi router. D. Launch Heimdallr APP, use LAN search or QR Code to add Heimdall Gateway. Scan QR Code to Download Dashboard “... -
Page 5: Arm/Disarm
Arm (Secured)/Disarm(Insecured) status Settings page A. Arm/Disarmed: while you are away or in sleep, Arm mode is suggested. When user is Include Admin Setup , User Information , Preferred Unit , System , Change Gateway “ “ “ “ “ “... - Page 6 C. If cannot include the device in 60 seconds, please remove the device and 5-1-1. Add(Include): include it again. A. Ensure Gateway is connected, enter device page and click “Add” to include D. In the process of inclusion, please note the In/Ex changes of gateway, lights flash devices, please flick the right button to include it according to the product only when the gateway works properly.
- Page 7 5-1-3. 5-1-4. Learn Mode: Reset: Ensure the Gateway not include any device or Reset the Gateway. Click “Reset” , show “Proccessing…” to reset the Z-Wave network. as attached photo. You can review and control the device for learned Gateway. Into the Learn Mode, show “Processing…” , operate another Controller into inclusion device mode, after the completion of the study to be prompted to inclusion success.
-
Page 8: Device Page
Device page Inclusion Page Will show the trigger device and existing device icon on the top column of device page. A. Ensure Gateway is connected, enter device page and click “+” “Other Sensors” Can move it around, also can click one of the device, will show the separate device on the to include devices, please flick the right button to include it according to the page and you can control the device. -
Page 9: Exclusion Page
C. If cannot include the device in 60 seconds, please remove the device and Exclusion Page include it again. Ensure gateway connected, click top right corner “ ” on the device page select the device and click “ X ” , please flick the right button to include it according to the product manual.