Advertisement
Quick Links
Advertisement
Summary of Contents for North Pole cable
-
Page 1: Quick Start Guide
Connect ANT+ Sensors to your BLE services! Quick Start Guide v1.1... - Page 2 Congratulations on taking action to manage your fitness sensor data! CABLE (Connect ANT to BLE) is a low power radio product used to receive and convert data from ANT+ enabled sensors to the appropriate BLE services via a BLE peripheral connection.
- Page 3 1. Download CABLEConfig from AppStore and open on iPhone. 2. Remove CABLE from packaging. 3. Tap CABLE to wake up. Green LED will Flash! Note – the CABLE Unit needs to be woken up each time you use by double tapping!
- Page 4 4. Move CABLE Unit over icon on your iPhone until it turns Green. 5. Tap on a Sensor category you want to setup (ANT+ profile). Make sure your Sensor is nearby and activated for this PAIRING process 6. On the next page You will see options for the pairing.
- Page 5 After your sensor is recognized you will this get message: “Tracking Device” 7. Click “Operation” located in upper left corner and select “Save Settings”.
-
Page 6: Using Cable
CABLE app is running => Theft Detection. * CABLE uses a 2032 coin-cell battery. If used on average 1 hour per day, you should get numerous months of usage between battery changes. - Page 7 CABLE enables the application to see the ANT+ sensors you that you have setup within the CABLE application. Ensure that you identify these same sensors within your BLE application. After configuration is completed, you only need to launch your BLE service application and start your workout.
- Page 8 Detailed documentation > Frequently Asked Questions > Troubleshooting Guide > Tips for different BLE services. CABLE Certifications FCCID: XRH-414ANT IC: 11922A-414ANT CE and AU/NZ are pending North Pole Engineering, Inc. 221 N. 1 St, Suite 310 Minneapolis, Minnesota 55401 http://npe-inc.com/corporate/corporate-contact.html...