Table of Contents
Advertisement
Rear Wheel Installation
First unlock the rear foot brake by
pulling the black loop upward
Front Wheel Installation
Start by tipping the
push chair backward
so the fork assembly
is pointing upward.
This will make it easier
to install the wheel.
Position the silver lever straight out from the
frame as shown. Now tighten the black knob on
Be sure to dispose of the packaging
from the wheels, they can be a
choking hazard to young children.
Next, push the black
button and while
holding it in...
the opposite
side of the lever
until it just starts
to become snug.
www.adaptivestar.com 1-800-278-9626
...insert the wheel axle
all the way into the
pushchair frame and
release the button.
Now repeat to install
the other wheel.
The front wheel is the same as a bicycles. Place the tire be-
tween the brake pads and orient your wheel so that the flat
sections of the wheel axle align with the slotted metal fork
tips and push the
wheel so that it seats all
the way in the back of
the fork tip.
Now swing the lever closed as shown here. If you
are unable to swing
the lever completely
into the locked po-
sition, open it back
straight out, loosen
the black knob
slightly, and close the lever again.
Check to make sure
your wheels are
locked in before
each use.
Advertisement
Table of Contents
