Safety Information IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatusnear water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Contents Contets TV Specification Accessories Overview of front and side panel Remote-Control Unit OSD Menu Operation Channel 7-15 Picture Sound Time Option Lock Midia part TROUBLESHOOTING PICTURE DEFECTS AND THE REASON...
TV Specification Screen size 27" Display Type TFT LED Resolution 1920 X 1080 Aspect Ratio 16:9 Alimentation DC 12V Audio Output L/R8WX2 Dimensions(With stand) 715.0X82.7X497.2mm Note: Design and specification modification maybe made at any time without prior notice, all data and dimensions are approximations.
Accessories Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. Owner’s Instructions Remote Control...
Overview of back panel POWER IN EARPHONE COAXIAL HDMI 1 HDMI 2 DC 12V SCART YPbPr DVB-S2 DVB-T2 AUDIO Mini Mini 1. DC IN 9. DVB-T2 input Connected to external antenna to receive 2. EARPHONE the ATV/DTV program in ATV/DTV mode. Connecting for headphone.
Page 8
Remote-Control Unit Button Description POWER Set your TV to power on or standby mode. Press to mute the sound. Press again to regain sound. MUTE Press to display the source and channel's info. DISPLAY AUTO adjust in the PC mode. AUTO Press to select signal sources for TV.
OSD Menu Operation Satellite Satellite auto tuning setting The concrete unicable setting includes userband/SRC Add. , frequency and position. The userband have many options, such as 1/0, 2/1/, 4/3, 7/6. The range of frequency is wild and you can set according to your need. The position can change to A/B DVB-S manual tuning...
Page 15
OSD Menu Operation Press OK button to show satellite name list and choose one when TV is in main manual tuning. Scan mode can be modified to preset/audio/blind screen .The system give you three service type including free, scramble, all .Please note that you are able to open/close network scan.
Page 16
OSD Menu Operation Set limit ,location Choose one satellite signal and press green button to set limit. Not only can you set east and west limit, but also you have access to disable limit. If you press yellow button, you are able to set location.
Page 17
OSD Menu Operation Choose one of satellite signal list and press OK button to enter setting interface. The orbit positions you can select are just 019.2E and 019.2W.For LNB type, the system provides many options to fit your needs. You can open one or close all about Diseqc.Diseqc1.0 can switch from LNB1 to LNB4.
Need help?
Do you have a question about the ASV2770X and is the answer not in the manual?
Questions and answers