Summary of Contents for ECHO TOUCH 160
- Page 1 OWNER’S & INSTALLATION GUIDE TOUCH SCREEN COLOR 2-WAY UPGRADE KIT THIS IS A TEMPORARY COVER THE FINAL COVER IS IN A SEPARATE FILE...
-
Page 2: Table Of Contents
Table Of Contents Installing & Programming The ECHO System ............3 Overview Of The Controller ................... 4 The ECHO-TOUCH Status Screen ............... 5 Using The ECHO-TOUCH Controller ..............6 First time use & controller setup ................ 6 Language selection ................... 6 Controlling your system .................. -
Page 3: Installing & Programming The Echo System
Installing & Programming The ECHO System The ECHO-TOUCH communicates with a window-mounted base unit which is plugged directly into the host security system module. The window-mount antenna should be mounted directly to the interior glass by utilizing the attached adhesive pad (clean the glass before adhering) for the best performance. The receiver/transmitter also contains alternative Status Lights and a Valet Switch. -
Page 4: Overview Of The Controller
Overview Of The Controller 1) Antenna: Sends commands to the system and receives confirmations for 2-way functions. 2) Touch Screen LCD: Displays all controller function buttons as well as the status of your system. 3) Home Button: This wakes up the controller when the screen is off and returns you back to the status screen. -
Page 5: The Echo-Touch Status Screen
The ECHO-TOUCH Status Screen Alarm Trigger Indicator Battery Level Indicator* In Range Indicator Clock/Timer Current System State Vehicle Image (Selectable) Vehicle Name (Programmable) Alarm Clock ON icon Lock/Unlock Indicator Vibration Mode Indicator CH2/CH3 Indicator Melody/Voice Indicator Remote Start ON/OFF Indicator *The controller is powered by a built-in rechargeable battery. -
Page 6: Using The Echo-Touch Controller
Using The ECHO-TOUCH Controller FIRST TIME USE & CONTROLLER SETUP Before the controller will function properly, it must be matched to the type of system you have. The ECHO-TOUCH is compatible with many different sys- tems so please follow these steps to configure it for yours: SCREEN 6 1) Press the HOME button to turn on the controller. -
Page 7: Controlling Your System
Using The ECHO-TOUCH Controller (cont’d) CONTROLLING YOUR SYSTEM SCREEN 1: To access, press the HOME button and tap the screen. LOCK: Press and release the “LOCK” icon. • YOUR SYSTEM SHOULD REACT THE SAME AS WITH YOUR ORIGINAL CONTROLLER. • UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, IT WILL PLAY THE LOCK/ARM ANIMATION AND VOICE ALERT. - Page 8 Using The ECHO-TOUCH Controller (cont’d) TRUNK RELEASE / CHANNEL 2: Press the and hold the “TRUNK” icon for 3 seconds. • YOUR SYSTEM SHOULD REACT THE SAME AS WITH YOUR ORIGINAL CONTROLLER. • UPON RECEIVING CONFIRMATION FROM YOUR SYSTEM, IT WILL PLAY THE TRUNK RELEASE ANIMA- TION AND VOICE ALERT START (GEN 1/GEN 2 REMOTE START): Press and release the “...
- Page 9 Using The ECHO-TOUCH Controller (cont’d) CHANNEL 3 (ALARM ONLY): Press and release the “ ” icon using the same method as with the original controller (i.e., 1 or 2 presses, etc). • YOUR SYSTEM SHOULD REACT THE SAME AS WITH YOUR ORIGINAL CONTROLLER. •...
- Page 10 Using The ECHO-TOUCH Controller (cont’d) CHANNEL 4 (IF EQUIPPED): Press and release the “CH4” icon using the same method as with your original controller (i.e., 1 or 2 presses, etc). • YOUR SYSTEM SHOULD REACT THE SAME AS WITH YOUR ORIGINAL CONTROLLER. NOTE: THE “CH3”...
- Page 11 Using The ECHO-TOUCH Controller (cont’d) AUX 4 (IF EQUIPPED): Press and release the “AUX4” icon using the same method as with your original controller (i.e., 1 or 2 presses, etc). • AUX4 IS A VIRTUAL CHANNEL OUTPUT ON THE SYSTEM’S DATA PORT. IF USED, IT WAS CONFIG- URED BY YOUR INSTALLER.
-
Page 12: Mutli-Car Operation & Vehicle Profiles
Mutli-Car Operation & Vehicle Profiles MULTI-CAR OPERATION The TOUCH controller can operate up to 2 different systems. When control- ling 2 systems, the controller will receive all status updates on the currently selected vehicle profile and will receive only trigger alerts for the 2nd vehicle. You can switch from one car to the other at anytime as well as choose a unique image and name for each vehicle. -
Page 13: Selecting Car1 Or Car2
Mutli-Car Operation & Vehicle Profiles (cont’d) SELECTING CAR1 OR CAR2 Once the vehicle names have been programmed for both vehicle profiles, you can simply switch between the two as needed. To do so: 1) Tap the desired vehicle’s icon (CAR1 or CAR2) on SCREEN 3 as if you are going to change the name. -
Page 14: Programming The Controller Options
Programming The Controller Options SELECTING BUTTON BEEP, MELODY, & VIBRATE MODES The controller has 3 different type of alert modes. BUTTON BEEP configures the controller to beep as a confirmation when you press any icon on the screen. The MELODY and VIBRATE settings configure how you are alerted any time the controller receives a confirmation or alert from the vehicle’s system. -
Page 15: Clock & Time Options Overview
Programming The Controller Options (cont’d) CLOCK & TIME OPTIONS OVERVIEW The controller’s clock has 3 programmable options. You can set the time & date, select 12 or 24 hour format, and program the built-in alarm clock. To program these options, you must first access SCREEN 4 by pressing the home button, tapping the screen, and pressing the DOWN ARROW 3 times. -
Page 16: Setting The Time Format (12 Or 24 Hour)
Programming The Controller Options (cont’d) SETTING THE TIME & DATE (cont’d) 4) Now, set the time using the +/- increment icons. You can increase or decrease the minute or hour by increments of 5 or 1. ~Use the GREEN UP ARROW to change from hours to minutes. 5) Press the FOLDER icon to save the date &... -
Page 17: Demo Mode
Programming The Controller Options (cont’d) DEMO MODE Demo mode will show you a demonstration movie of all the controller’s avail- able functions along with confirmation animations and voice alerts. To view demo mode, use the following steps. 1) Access SCREEN 4 (see page 15). 2) Press the DEMO icon (pictured on page 15). -
Page 18: Setting The Screen On Time
Programming The Controller Options (cont’d) SETTING THE SCREEN ON TIME 1) Access SCREEN 5 (see page 17) 2) Press the SCREEN ON TIME icon (see page 17) 3) Choose the 5, 10, or 15 second preset and, if desired, adjust with the +/- 1 second increment icons. -
Page 19: Power Off Mode
Other Controller Functions (cont’d) POWER OFF MODE The controller can be turned off completely to save battery life while traveling or out of range of the vehicle. To turn the controller off: 1) Access SCREEN 5 (see page 17) 2) Press the POWER OFF icon (see page 17) 3) You will see a warning screen asking you to confirm. - Page 20 THIS IS A TEMPORARY COVER THE FINAL COVER IS IN A SEPARATE FILE...