Bestron AWK1101W/Z User Instructions page 33

operAtion - General
The appliance is intended only for domestic use,
not for professional use.
1. Jug
2. Water-level indicator
3. Lid
4. Button to open the lid
5. Handle
6. On/off switch with pilot light
7. Spout
8. Power cord and plug
operAtion - Before use for the first time
When using the jug kettle for the first time boil three jugs of water, and dispose of the
boiled water.
tip: You can use vinegar or special descaling agents for the first time.
operAtion - Boiling water
1. Turn the jug so that the spout faces away from you.
2. Open the lid.
3. Fill the jug with the required quantity of water (at least 0.5 litres, and a m a x i m u m of 1.7
litres). Never fill the water boiler over the "max". Otherwise the hot water can
spatter out of the base.
Make sure that you do not spill any water.
4. Close the lid.
5. Insert the plug in the wall socket. Push down the On switch. The On/Off pilot l i g h t will
illuminate.
6. The jug kettle is now switched on, and the water will now begin to heat. The jug
4
7
1
8
33
user's instructions
3
2
5
6