Do you have a question about the Concept S SW + R and is the answer not in the manual?
Questions and answers
Summary of Contents for TeufelW + R Concept S SW + R
Page 1
Technical specifications and operating instructions 5.1 channel active subwoofer with integrated Dolby Digital/dts receiver...
Page 2
2. Series or batch number Found at the rear of the device, E.g. batch no.: MO 04007480121A Thank you for your support. Technical data You will find technical data on our website: www.teufelaudio.com · Concept S SW + R Dolby Digital/dts...
Pay particular attention to the cable/ plug connection, the mains socket and the cable output from the subwoofer. The power supply cable and the cables that con- nect the speakers should be checked regularly for insulation · Concept S SW + R Dolby Digital/dts...
Introduction to Concept S SW + R Dolby Digital/dts Dear Lautsprecher Teufel customer, Thank you for buying the Subwoofer Concept S SW+R Dolby Digital/dts from Lautsprecher Teufel. You have purchased a high-performance sub- woofer, as Lautsprecher Teufel speaker systems are equipped with high quality components and are manufactured to a high standard.
You can find all of the optional accessories for the Concept S SW+R Dolby Digital/dts subwoofer on page 7 of these instructions for use. 330m speaker cable 3mains cable · Concept S SW + R Dolby Digital/dts...
Accessories (optional) Optional accessories for the Concept S SW + R Dolby Digital/dts Here is an overview of suitable, optionally avail- able accessories for your fully active Teufel sub- woofer. Teufel Y adapter cable Teufel casters The first choice for sound...
You can always use our recommendations to experiment with what works best acoustically and optically. Let your ears (and eyes) decide! Front Centre Front We recommend placing the subwoofer in the front grey area. · Concept S SW + R Dolby Digital/dts...
Page 9
We recommend placing the subwoofer in the front grey area. We recommend placing the rear speakers in the Rear Rear rear grey area. Select position area A or B. B Rear Rear · Concept S SW + R Dolby Digital/dts...
“AC3” = Dolby Digital. This display is interrupted when you make any changes, such as to the volume. As soon as this activity is ended, the display indicates the originally selected sig- nal source again. · Concept S SW + R Dolby Digital/dts...
When set to “Off” , the subwoofer is switched off, and when set to “On” it is switched on. Attention: The separating equipment of this equipment is the mains plug, this separating equipment must be usable without difficulties. · Concept S SW + R Dolby Digital/dts...
Option to set the delay on the centre speaker. Only works with Dolby Digital/dts. ĕ Page 19 Test Initialises the test sound to equalise the speakers. ĕ Page 18 · Concept S SW + R Dolby Digital/dts...
DOLBY DIGITAL/DTS have a digital output PlayStation 2 & 3, ® Xbox 360 * ... DIGITAL INPUT ® oPtiCAl out oPtiCAl Digital connection cable (optical) CoAXiAl out CoAXiAl Digital connection cable (coaxial) · Concept S SW + R Dolby Digital/dts...
CONCEPT S SW+R DD/DTS ANALOGE INPUT liNE out ANALOGE INPUT When connecting the devices, please note the relevant infor- mation in the handbooks for the components used. AuDio out Video recorder ANALOGE INPUT AuDio out · Concept S SW + R Dolby Digital/dts...
REAR SPEAKER CENtRE FRoNt SPEAKER – – – RiGHt RiGHt SPEAKER OUTPUT RR C RL FR FL – – FRoNt SPEAKER REAR SPEAKER – – lEFt lEFt · Concept S SW + R Dolby Digital/dts...
1) Do not combine new and old batteries 2) Do not use different types of batteries ĕ The functions of the remote control are ex- 3) Observe polarity – see battery compartment plained on pages 12/13. · Concept S SW + R Dolby Digital/dts...
The volume setting of the subwoofer may be – – slightly different when playing back music com- pared with home cinema sound, depending on REAR-L REAR-R the recording quality and mixing. While a large · Concept S SW + R Dolby Digital/dts...
Page 19
6 ms + 15 ms constant = 21 ms delay time. As settings for the Concept S SW+R Dolby Digital/dts are in increments of five, choose the next possible value, i.e. 20ms. · Concept S SW + R Dolby Digital/dts...
The switch also works in tuner mode, but chang- ing the Listen modes is not shown in the display. Balance Balance – – – – – – – – REAR-L REAR-R REAR-L REAR-R · Concept S SW + R Dolby Digital/dts...
CENTER WOOFER – – – REAR-L REAR-R Balance SCAN STEREO/MONO – – – C DELAY TEST – – NIGHT MODE LISTEN MODE REAR-L REAR-R RESET S DELAY – – CENTER WOOFER · Concept S SW + R Dolby Digital/dts Balance...
(e.g. using an extension lead). In addition, try disconnecting the cable connection from the subwoofer to the connect- ed devices in order to exclude the influence of connected components. · Concept S SW + R Dolby Digital/dts...
Need help?
Do you have a question about the Concept S SW + R and is the answer not in the manual?
Questions and answers