Midi Applications; As A Midi Controlling Device; As A Slave Device; Midi Sequencer Recording - Generalmusic RealPiano pRP6 Owner's Manual

MIDI Applications

The following explains how your pRP6 can be used in the most common MIDI
setups suited to this instrument:
a) as a MIDI controlling device (Master);
b) as a tone generator (in other words, a Slave);
c) for MIDI sequence recording.

As a MIDI controlling device

pRP6, like most MIDI instruments, transmits note and velocity
information (touch response) via the MIDI OUT port whenever
notes are played on the keyboard.
If the MIDI OUT port is connected to the MIDI IN port of another
MIDI keyboard (synthesizer, etc.) or a tone generator (more
commonly called an "expander", but essentially any device
with an internal sound engine), the external unit will respond precisely to the
notes played on the transmitting keyboard.
The result is that such a setup allows you to play two instruments at the same
time, using pRP6 as the controlling device (Master) and the other as the device
being controlled (Slave).
Quite simply, every time you select a Preset, you will send Program change
messages to the external device who will respond by playing a second sound.

As a Slave device

As well as transmitting MIDI information, pRP6 recognizes the
same type of data if received at the MIDI IN port from an
external controlling device. In this case, the MIDI IN port of the
pRP6 is connected to the MIDI OUT port of the external
controlling unit. This, therefore, allows pRP6 to be controlled
in exactly the same manner as described above, only this time,
the pRP6 behaves as the slave and the external device the
controller.

Midi Sequencer recording

The type of data transfer described above can be exploited very
efficiently for MIDI sequence recording. For this connection,
shown in the diagram, the pRP6 MIDI OUT is connected to the
Sequencer MIDI IN, and the Sequencer MIDI OUT is connected
to the pRP6 MIDI IN. This connection is more commonly know
as a "MIDI Loop".
Any instrument with a sequencer, or a Computer running
sequencer software, can be used to capture (record) the MIDI data transmitted
by the pRP6.
When the recorded data is played back, the pRP6 reproduces the recorded
sequence in exactly the same manner as it was recorded.
15