Back Panel - Generalmusic Realpiano Digital Pro 1 Owner's Manual

Rear panel - PRO 1 / PRO 2
(1) (2) (3)
(1) S
PEAKER JACK
(2) R
IGHT INPUT
(3) L /M
EFT ONO INPUT
(4) R
IGHT OUTPUT
(5) L /M
EFT ONO OUTPUT
(6) D
AMPER
(7) P 1
EDAL
(8) P 2
EDAL
(9) MIDI
IN
(10) MIDI
THRU
(11) MIDI
OUT
(12) C
OMPUTER JACK
(13) D.C.
POWER JACK
(4) (5) (6) (7)
This jack allows you to connect a pair of multimedia monitor speakers for practice.
This output offers a small amount of power to drive the speakers at a low level.
You can use these inputs to connect another instrument or sound module to the piano.
The output of the other instrument will be mixed with the main signal of the piano
and sent to the OUTPUT, SPEAKER and HEADPHONE jacks. If you are connecting
a mono signal, (e.g. a microphone) then you should use only the Left/Mono connector.
These outputs are used to connect the instrument to an amplifier, mixer or recording
device in stereo. If you are connecting to mono equipment, (e.g. a guitar amplifier)
then you should use only the Left/Mono connector.
You can connect either a standard footswitch or the special Real Piano Continuous
Damper Pedal, (available from your Generalmusic dealer) to simulate the right pedal
of a piano.
Each socket can accept either a footswitch or a continuous, (volume) type pedal.
The function for each pedal can be selected in the PERF EDIT section.
Allows the sounds of the PRO1/2 to be played by an external device e.g. a controller
keyboard or a sequencer.
Provides a copy of the information being received by the MIDI IN. Use MIDI THRU
when connecting a number of different instruments together.
Sends MIDI information from the PRO 1/2 to other equipment so that the instrument
can be used as a controller.
Allows direct connection of the instrument to an IBM or Macintosh computer without
the need to use a MIDI interface.
Connection for the power supply unit. Use only the unit supplied with your instrument.
Generalmusic PRO 1/PRO 2
(8) (9) (10)
Page 6
(11) (12) (13)