Related Manuals for ROBINHOOD SEII500Q
Summary of Contents for ROBINHOOD SEII500Q
- Page 1 Issue: B Description: ROBINHOOD WASTE DISPOSAL- SCRAPEATER II Model Number: SEII500Q, SEII500QA, SEII750QA Model may vary slightly from image pictured...
-
Page 2: Pre-Installation
Pre-installation Important: Before you start to install your Robinhood Scrapeater, please read through the entire instruction manual thoroughly. The set of instructions provided is general: local building codes take precedence over the instructions in this guide and your installation must conform to the building codes in your area. Be sure to retain this set of instructions for future reference. - Page 3 Securing the Sink flange Before installing your Scrapeater, make sure you have all the components necessary, by checking through the component list above. Disassemble all the components from the stainless steel sink flange assembly (Part #2) and triple point mounting bracket (Part #3), excluding the splash baffle (Part #5), from the main waste disposal body. First, unscrew the mounting ring (Part #4) that holds the stainless steel sink flange and the main body together.
- Page 4 Ensure all parts are removed. The dishwasher drain outlet on your Robinhood waste disposal will accept a 22mm drain hose. Fasten the connection tube in place with a hose clamp.
-
Page 5: Plumbing Connection
Plumbing Connection Check inside the disposer to make sure that no foreign objects are inside the grinding hopper. Place the metal bracket over the non-threaded end of the waste outlet elbow. Attach the end of the waste pipe elbow into the slot in the rubber gasket, ensuring that the circular ridge on the rubber gasket is facing the main body of the unit, and the flat side of the rubber gasket faces the waste pipe. - Page 6 Operating instructions Remove the sink drain plug. Turn on the cold water to a medium-high flow, allowing the water to flow into the waste disposer. Turn on the waste disposer (using the air switch if fitted). Put all the food waste into the disposer while the disposer is operating and the water is running. Use the extrusion attached to the drain plug to push the food down the disposer.
- Page 7 Over time the plastic will loosen up. As an interim measure we suggest applying a small amount of cooking oil to the inside of the Sink Flange. 7. For more FAQ’s and Care Instructions, visit our website www.robinhood.co.nz/waste disposers/cleaning maintenance...
- Page 8 Metal: Silverware, nails, tacks wire, bread ties, staples. Glass: Jars, bottles, pieces of pottery or crockery. Dye or drain cleaning chemicals. Excessive quantities of fat or grease. With proper use and care your Robinhood Waste Disposal will provide you with many years of trouble free service.
- Page 9 Product Approvals and Ratings Product approval Nemko Shanghai Ltd (Shenzhen Branch) number Report No: 310175 (Main Report: 235449) Issued: 21 July, 2016 SEII500Q/QA Product rating 370W Max at 240V 50Hz SEII750QA 600W Max at 240V 50Hz Electric approval AS/NZS 60335.2.16:2006...
- Page 10 The following conditions apply in respect of the warranty given in this certificate: 1. Monaco Corporation Limited (“Monaco”) warrants the following Robinhood products against manufacturing defects and faulty materials, under normal use and subject to the exclusions in this certificate, for a period of: Rangehood, Ovens, Cooktops, Dishwashers, Waste Disposals - 24 months from date of original purchase for domestic use.
Need help?
Do you have a question about the SEII500Q and is the answer not in the manual?
Questions and answers