Table of Contents
Advertisement
T-Series • T-Series
2.4.7 Connection elements
2.4.7.1 Ethernet interface
Interface
Ethernet interface
RJ45 shielded
(10BASE-T /100BASE-TX)
2.4.7.2 USB port
This Power Panel features a USB 2.0 (Universal Serial Bus) host controller with 2 USB ports that are accessible
externally for the user.
Transfer rate
1
Power supply
1
The actual value depends on the operating system or driver being used.
2
Each USB port is protected by a maintenance-free "USB current-limiting circuit breaker" (max. 0.5 A @ IF3 / max. 0.1 A @ IF4).
Warning!
Peripheral USB devices can be connected to the USB ports on this device. Due to the vast number of
USB devices available on the market, B&R cannot guarantee their performance.
Important!
Because this interface is designed according to general PC specifications, extreme care should be
exercised with regard to EMC, cable routing, etc.
28
Terminal
Ethernet
1
RXD
2
RXD\
3
TXD
4
Termination
5
Termination
6
TXD\
7
Termination
8
Termination
Table 18: Ethernet interface - Pinout
Figure 10: USB port
USB port
Low speed (1.5 Mbit/s), full speed (12 Mbit/s), high speed (480 Mbit/s)
Max. 0.5 A (IF3) or 0.1 A (IF4) per interface
Table 19: USB port
Pinout
Receive signal
Receive signal inverted
Transmit signal
Termination
Termination
Transmit signal inverted
Termination
Termination
IF3
IF4
2
Power Panel T-Series User's Manual V 0.30 Preliminary
Advertisement
Table of Contents
