BIS-6621 Quick Setup Guide Packing List Description BIS-6621 Power Cable Power Adaptor Wifi Antenna SATA Connector Mounting Rack Mounting Screw Package Safety Warning: The use and installation of this system should only be performed by professionals. Improper installation of any electronic device or electrical component can result in serious injury or death.
Page 2
Install Guide Step 1 - Inspect Contents Unpack all package contents and inspect each component. Make sure all included parts and accessories are present. Step 2 - Remove Top Cover Using a phillips head screw driver, remove the four screws on the sides of the enclosure. Step 3 - Install 2.5”...
Page 3
Mount the HDD on the tray with the four screws in the small plastic package. Then mount the HDD bracket back onto the backplane and fix it with four screws. Use the SATA connector to connect the HDD with the board as marked in circles. Step 4 - Rack Mounting Take out the four mounting screws from the screw package and tighen them into the four...