Before You Start - Next CORSICA VESSEL 655731 Assembly Instructions Manual

Table of Contents

Advertisement

Warnings
We suggest you retain these instructions for future reference.
Unwrap all packaging materials and place the components
on top of the carton box or on a clean floor to prevent it from
scratching.
This product should only be used on firm, level ground.
keep small parts out of reach of children.
Suites are designed to be freestanding and should not be
permanently secured or sealed to the wall.
Read all instructions before using this heater. When using
an electrical heating appliance basic precautions should
always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. Keep combustible materials such as
furniture, pillows, bedding, papers, clothes, and curtains at
least 1 metre from the front of the heater and keep them
away from the sides and rear.
Extreme caution is necessary when any heater is used by or
near children or invalids and whenever the heater is left
operating and unattended. The guard is to reduce the risk of
fire or injury from burns and no part of it should be
permanently removed. It does not give full protection for
children or the infirm.
Always unplug the heater when not in use. To disconnect
heater, turn controls to off, then remove the plug from the
socket.
Connect to properly earthed sockets only. The earth should
comply with current IEE regulations.
Use this heater only as described in this manual. Any other
use not recommended by the manufacturer may cause fire,
electric shock, or injury to persons.
Avoid the use of an extension power cord because this may
overheat and become a fire hazard. If an extension cord must
be used it should be a 13A extension cord.
Produced in China for Next Retail Ltd.
655731-2014-V1
CORSICA VESSEL FIREPLACE
655731
Assembly instructions

BEFORE YOU START

The appliance must be positioned so that the plug is
accessible. If you choose to chase the wire into the wall or
cosmetic reasons and or to install the fire using a fuse spur
connection then the manufacturer cannot be held liable for any
charges arising from future decorative or re-installation costs
should the fire require to be exchanged at a future date.
This heater should not be used in a dusty environment.
Warning: in order to avoid over heating do not cover the heater.
The appliance MUST be earthed.
The appliance MUST NOT be situated directly below a fixed
socket outlet.
Check the voltage requirement of the fire accords with the
local supply voltage.
If the moulded plug is removed it should be disposed of with
the fuse removed, as there is a risk of electrical shock if
inserted into another socket outlet.
If the power cord needs to be changed, it can be accessed
through the mains access cover. This work should only be
done by a qualified electrician.
Do's
We suggest you spend a short time reading through this
leaflet before you start.
When you are ready to start make sure that you have the
right tools, plenty of space and a clean, dry area for assembly.
Check the pack and make sure you have all the parts listed.
During assembly children should be kept away from the
product due to possible risk of injury.
Due to the size of this product we recommend that it is
assembled in the room intended for use.
Ensure that this product is fully assembled as illustrated
before use.
Check all screws or bolts are tightened and inspect regularly.

Advertisement

Table of Contents
loading

Table of Contents