Huawei HG531 V1 Quick Start Manual page 2

2
Powering On
To power on the HG531 V1, press its power button.
After the HG531 V1 is powered on, the HG531 V1 indicator turns on. The following
table lists how the indicators behave when the HG531 V1 is operating correctly. If the
indicators do not behave as expected, ensure that everything is plugged in correctly.
Indicator Expected State Description
Power Steady green
Blinking green
ADSL
Steady green
Blinking green
Internet
Steady green
Blinking green
WLAN
Steady green
Blinking green
WPS
Steady green
The HG531 V1 is powered on.
A DSL connection is being activated.
A digital subscriber line (DSL) connection has been
set up and activated.
The HG531 V1 is connected to the Internet in router
mode, and data is being transmitted.
The HG531 V1 is connected to the Internet in router
mode, but no data is being transmitted.
The HG531 V1 has WLAN enabled, and data is
being transmitted.
The HG531 V1 has WLAN enabled, but is not
transmitting data.
The HG531 V1 is attempting to connect to a
wireless client over the WLAN using the WPS
function.
The WPS indicator blinks for 120 seconds or less.
The HG531 V1 is connected to a wireless client,
such as a computer with a wireless network
adapter, over the WLAN using the Wi-Fi Protected
Setup (WPS) function.
The WPS indicator is steady on for 300 seconds.
2