Download Print this page

Casio 10B+7L(VER.C) Operation Manual

Hide thumbs
   

Advertisement

MA1211-ED
Operation Guide 10B+7L(Ver.C)
Reading the display
[Regular timekeeping
[Daily alarm mode]
mode]
Time-signal-on-mark
Date
(Light)
Alarm-
Day
on-mark
Press
C.
L
PM
C
A
PM
Minute
Second
Hour
SU: Sunday, MO: Monday, TU: Tuesday, WE: Wednesday, TH: Thursday, FR: Friday, SA: Saturday
(Changeover between 12-hour and 24-hour formats) In regular timekeeping mode,
with every push of A, the display is switched between 12-hour and 24-hour formats.
Setting daily alarm
If the daily alarm is set, the buzzer sounds for 20 seconds at the preset time every day
until cleared. To stop the buzzer, press the L button. If the time signal is set, the watch
sounds every hour on the hour.
(Sound demonstration) Press and hold the A button in alarm mode to sound the buzzer.
[Hour setting]
L
C
Press L in the daily alarm mode to
set hour. One hour advances with
every push of A.
* If the C button is pressed, the watch reverts to the regular timekeeping mode.
(Quick digit advance) When the A button is pressed for more than 2 seconds, the digit
advances quickly. When released, the digit advance will stop.
[On or off setting of daily alarm and time signal]
[The alarm-on-
mark and time-
signal-on-mark
appear.]
Press
A.
L
C
A
The daily alarm
and time signal
sound.
Setting time and calendar
[Regular timekeeping]
[Second adjusting]
L
PM
C
A
Press C three times
Press A to adjust
to change regular
seconds.*
timekeeping mode
to time/calendar
setting mode.
* Precise time can be maintained by correcting the seconds once a month on a time signal from
a radio, TV, telephone, etc.
(Quick digit advance) When the A button is pressed for more than 2 seconds, the digit
advances quickly. When released, the digit advance will stop.
Specifications
Accuracy at normal temperature: ±30 seconds a month
Display capacity:
• Regular timekeeping mode
Hour, minute, second, am/pm, date and day
Calendar system: Auto-calendar set at 28 days for February
• Daily alarm mode
• Hourly time signal function
• Stopwatch mode
Measuring capacity: 59 minutes 59.99 seconds
Measuring unit: 1/100th of a second
Measuring modes: Normal time, net time, split time and 1st-2nd place times
Battery:
One lithium battery (type: CR-2016 –– except Module 1271/BR-2020 –– Module 1271 only)
Approx. 7 years operation on type CR-2016 (except Module 1271) /10 years on type BR-
2020 (Module 1271 only). [assuming alarm operation for 20 sec./day and one light operation
for 1 sec./day]
NOTE: THERE IS NO WAY unit components can be damaged or malfunction, due to
misoperation of buttons. If confusing information appears on the display it means entry
sequence was incorrect. Please read the manual and try again.
[Stopwatch mode]
Mode indicator
Mode
indicator
Press
Press
C.
C.
PM
Hour
Second
Minute
Minute
1/100 second
Press C.
[Minute setting]
A
Press L to set minute digits.
One minute advances with every
push of A. Press L to complete.*
[The alarm-on-
[The alarm-on-mark
[The time-signal-
mark and time-
only appears.]
on-mark only ap-
signal-on-mark
pears.]
disappear.]
Press
Press
A.
A.
The daily alarm
The daily alarm
and time signal
only sounds.
do not sound.
Press A.
[Hour setting]
PM
Press L to move to
Press L to move to
the hour setting.
the minute setting.
Press A to increase
Press A to increase
the number.
the number.
Stopwatch operation
[Time/calendar
setting mode]
L
Date
Day
C
(a) Net time measurement
PM
Start
(b) Split time measurement
Hour
Second
Minute
Start
(c) 1st-2nd place times
Start
The time signal
only sounds.
IMPORTANT: Setting sequence MUST BE FOLLOWED when making any new setting.
[Minute setting]
[Month setting]
Press L to move to the
month setting. Press A to
increase the number.
• Correction of any digit, if not required, can be skipped by pressing the L button
repeatedly.
• If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the regular timekeeping mode automat-
ically.
A signal confirms start/stop operation.
(Working range) The stopwatch display is limited to 59
minutes 59.99 seconds, for longer times reset and start
again.
A
Time loss
Stop
Re-start
Stop
Split
Split release
Stop
Split
Stop
Split release
The first runner
The second runner
Record the time
finishes.
finishes. Record the
of the second
time of the first runner.
runner.
[Date setting]
Press L to move to the date
Press L to move to the day
setting. Press A to increase
setting. Pressing A advanc-
the number.
es to the next day. And press
C to complete.
Reset
Reset
Reset
[Day setting]
1

Advertisement

Comments to this Manuals

Symbols: 0
Latest comments: