Paxar Monarch RF Link 7400 Operating Instructions Manual page 10

Renegade 4 Printers with External Modules
To link a Renegade 4 printer (with an external RF link module) to a data
collection terminal:
1. Turn the printer, terminal, and the RF link modules off.
2. Turn on the printer.
3. Wait for the printer's LED (near the trigger) to blink once.
4.
Turn on the printer's RF link module. The green LED turns on.
5.
Turn on the terminal's RF link module. The green LED turns on. Then,
the LEDs on both modules start blinking.
6.
Turn on the terminal.
10 RF link Operating Instructions