Advertisement
T r o u b l e s h o o t i n g
Problems can occur with the scanner and RF communications.
Scanner Problems
If the scanner does not turn on, have your System Administrator check
♦ the terminal's application to determine if it initializes the scanner in
the form's activate event.
♦ that the terminal's Ext. 5 volts option is set to Always On . To do so:
1. Tap the upper left corner of any screen.
2. Choose Settings from the drop-down menu.
3. Tap the System tab (at the bottom).
4. Tap the Symbol Settings icon.
5. Tap the Settings tab (at the bottom). The Ext. 5 volts drop-down
box appears in the middle of the screen that appears.
6 Operating Instructions
Advertisement
