Advertisement
I n s t a l l i n g t h e A d a p t e r
To install the adapter:
1.
Press the button on the battery compartment door (located at the
bottom of the printer's handle) and slide it open, pulling firmly. Pull
the door completely off the printer and lay it aside.
2.
Pull the battery out of the compartment. Or, place your hand beneath
the printer, turn the printer upright, and catch the battery in your hand
as it slides out.
3.
Insert the adapter pack (connector end first) into the printer's battery
compartment.
2 Installing the Adapter
Batter y
Compartment
Door
Button
Batter y
Advertisement
