Baumatic BR15.3A Instruction Manual page 27

o Raise the icebox door hinge to the appliance, placing it on the
opposite side from the icebox handle.
o The lower pivot pin should be inserted into the icebox door hinge
and then the icebox door hinge should be refitted to the
appliance.
o Disassemble the upper door hinge (k) and then carefully remove
the appliance door (j). Place the appliance door on a cushioned
surface, so that damage does not occur to it.
o Unscrew the upper door hinge pin (l); this pin must then be
firmly inserted into the opposite side of the upper door hinge
(this process is shown in the section of the line drawing labelled
"1").
o Remove the lower door hinge pin (n) and then fit it to the
opposite side of the cabinet (this process is shown in the section
of the line drawing labelled "2").
o Remove the plastic plugs (m) and then fit them into the holes
on the opposite side of the cabinet (this process is shown in the
section of the line drawing labelled "3").
o Carefully place the appliance door onto the lower door hinge pin.
27