Table of Contents
Advertisement
Quick Links
The ColorSpot Par 64 15 5W LED is a IP65 rated exterior LED fixture featuring four-in-one
RGBW LED diodes. With a total power consumption of 95 Watts the ColorSpot 64 is an energy
efficient fixture capable of providing a smooth color wash effects. Set up and control is done via a
wireless remote IR receiver which is on the face of the unit. Once set up, the unit can be operated from
DMX with 4 different DMX control modes, and features built in macro programs all of which can be
accessed via DMX or the optional wireless remote IR controller. You can daisy chain power up to 7
fixtures with 2, 5, & 10 meter cables. Designed and built with a rugged aluminum die cast housing and
internal thermal protection to ensure long life and operation.
Specification:
1.Weight: 11lbs
2. Size: 9.8"×7.4"×11.8"
3. Power input: AC100V-240V/50HZ-60HZ
4. Wattage:95W
5. LEDS: 15PCS
5W (4 in one)
6. Beam angle of LEDs: 40 degree
7. 3PIN female and male XLR socket, 4 PIN female and male power socket
8. 4-button LED digital display
9. IR remote available
ColorSpot Par 64
Operation
Manual
1 of 4 pages
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EuroLite ColorSpot Par 64
Summary of Contents for EuroLite ColorSpot Par 64
- Page 1 Operation Manual The ColorSpot Par 64 15 5W LED is a IP65 rated exterior LED fixture featuring four-in-one RGBW LED diodes. With a total power consumption of 95 Watts the ColorSpot 64 is an energy efficient fixture capable of providing a smooth color wash effects. Set up and control is done via a wireless remote IR receiver which is on the face of the unit.
- Page 2 10. IP rate: IP 65 It has seven kinds of operation mode, they are as follows: Static color select mode, Manual dimmer color mode, Color change mode, Color dreaming mode Auto-run mode, Slave mode, DMX mode Here above seven kinds running mode are selected by MODE button. Press MODE and UP button at the same time, when it is on, you can initialize it at extra factory setting, running on the auto- run program mode.
- Page 3 ×”.Press UP or DOWN to select the color dreaming speed grade 1-99 under this mode.(From slow to quick).Then press SETUP button to choose the flash speed mode.When“FS. ××” is displayed, press “UP” or “DOWN” button to adjust the flash speed(00-99), “0”is turn off flash,1 is the slowest,99 is the fastest.
- Page 4 186-199 G+B+W 200-213 R+G+B+W 214-227 Color change Speed 0-255 228-241 Color dreaming (slow→ 242-255 Auto run quick) Note:R---red G---green B---blue W---white Operation by IR remote You can also operate this product by IR remote, the distance available is at most Notice: IR remote is ready to control the unit which is any 10M.
- Page 5 Press D to display DMX mode. The R/G/B/W lights will flash 2~3 times indicates that the LED light has been set to DMX mode. Set ADDR Press this button to set the DMX address or initialize the program, then the red, green ,blue and white lights will flash 2~3 times.
Need help?
Do you have a question about the ColorSpot Par 64 and is the answer not in the manual?
Questions and answers