Winding The Bobbin - Singer 6660 Instruction Manual

WINDING THE BOBBIN

Be sure to use Class 15 bobbins.
1.Place a spool of thread on the spool pin, and secure
it with the spool pin cap. Pull the thread out from the
spool and place it through thread guides as shown
in illustration.Be sure to pull thread securely into the
bobbin winding tension disk.
2.Put end of thread through the hole in bobbin as
shown.Push bobbin winder shaft to far left position,
if it is not already there.
3. Place bobbin onto shaft with end of thread coming
from top of bobbin. Push bobbin winder shaft to the
right until it clicks. Hold the end of thread.
4. Start machine and the bobbin starts to wind. Bobbin
Push shaft to the left to remove bobbin and cut thread.
1
2
3
4
15