Summary of Contents for Olevia ZMT-620FTA
- Page 1 OLEVIA High Definition Digital TV Receiver ZMT-620FTA Firmware Ver 1.7.2 USER GUIDE Date: 10 July, 2008 OLEVIA 高清數碼廣播接收器 ZMT-620FTA 軟體更新版本 1.7.2 使用說明 日期:2008 年 7 月 10 日...
- Page 2 Enhance EPG recording page *錄影需另外購置外置硬盤機，建設使用 OLEVIA ZHD-UBSP35 250GB 硬 盤機或建議使用 3.5”, 160GB 外置硬盤.(外置硬盤必須連接電源) *OLEVIA Settop Box ZMT-620FTA does not include an external hard disk, OLEVIA ZHD-UBSP35 is recommended for recording. 3.5”, 160GB external hard disc with independent power supply is suggested *注意:此軟體版本只可於...
- Page 3 *注意: 如預設錄影節目, 可於 間前重新開啓電源即可. 完成設定後關機, 於錄影時 *Attention: you can switch off the set top box after adding recording schedule. Please switch it on before the pre-record start time. USB 記憶體內的所有內容或會因更新程序可能會被刪除,而硬盤內的所有 *注意: 內容會亦會因格式化而被刪除,為避免重要資料流失,請先為硬盤作備份. *Attention: the data inside USB flash drive may be affected due to the update process all the data in the hard disk will be erased after formatting.
- Page 4 Download the Firmware, “Olevia_PVR_1.7.2_part1..zim” and “Olevia_PVR_1.7.2_part2..zim” from www.schot.com and save in an USB flash drive. Plug in the USB drive at the back of OLEVIA ZMT-620FTA. 2. 按遙控器上的 “Menu” ,在 “主目錄”下選擇 “系統” “資訊”. Press “Menu” on the remote and select “Information” under “System”.
- Page 5 “系統資料”將會顯示現有硬體及軟體資料.請按遙控器上的紅色鍵作更新. The Hardware and Software version of the OLEVIA ZMT-620FTA is shown on the System Information”. Press the red button on the remote for updating firmware. 4. 選擇 “Olevia_PVR_1.7.2_part1..zim” 後按 “ENTER” 鍵. Choose the firmware file, Olevia_PVR_1.7.2_part1..zim, inside the USB drive by...
- Page 6 5. 選擇 “是” 及按 “ENTER” 鍵. Confirm to update by selecting “Yes”. 6. 更新進行中.請稍後. Please wait until the process finish.
- Page 7 更新完成第一部份後, ZMT-620FTA 會自動重新啟動. OLEVIA ZMT 620-FTA will reboot automatically after part 1. 注意:ZMT-620FTA 的升級程序仍未完成,請繼續以下之步驟,直至完全升級為 止. Attention: The upgrade has not been finished; please continue the following steps until the upgrade complete. 從新開機後,請選擇以英文作為設定語言,並繼續以下程序. Please select English as the language for the following process.
- Page 8 13. 這次要選擇 “Olevia_PVR_1.7.2_part2..zim”, 然後按 “ENTER” Choose the firmware file, Olevia_PVR_1.7.2_part2..zim, inside the USB drive by navigating on remote. 16. 再選擇 “YES” 及按 “ENTER” 鍵,以確認更新. Confirm to update by selecting “Yes”.
- Page 9 17. 更新進行中. 請稍後. Please wait until the process finish. 18. 更新完成後, ZMT-620FTA 會自動重新啟動. OLEVIA ZMT 620-FTA will reboot automatically after the process. 19. 重新啓動後請選擇適當的語言並重新搜台. Select the appropriate language and finish the upgrade by channels scanning. 第一部份完 The end of part 1...
- Page 10 Press the “File” button on the remote. “A: PORT 1” would be shown in Select Slot if connection is success; “A: Empty” implies the external hard disk has not yet connect with ZMT-620FTA, if so please check the cable and the power of the devices.
- Page 11 確認成功連接後,請按 “EXIT” 離開. Please press “EXIT” after the connection is confirmed. 如 硬 盤 是 初 次 連 接 ZMT-620FTA, 請 先 進 行 格 式 化 . 請 按 搖 控 器 上 之 “MENU” 鍵,選擇 “安裝” “硬盤格式化”. For the first time using the external hard disk with ZMT-620FTA, please format before operation.
- Page 12 格式化完成後,按 “EXIT” 退出. Press “EXIT” to return after finishing the process. 第二部份完 The end of part 2...
- Page 13 第三部份 最新預錄介面及功能 Part 3. Pre-recording function and interface 在節目播放的頻道, 按遙控器上的 “EPG” 鍵可以預覽電子節目表. 用方向 鍵選擇想預錄的節目, 再按 “Picture” 鍵, 螢幕會出現節目預約錄影表. Switch to the desired channel, press “EPG” on remote to view the Electronic Program Guide (EPG). Select the program by navigator and press “PICTURE” to add schedule the Record schedule menu.
- Page 14 第三部份完 The end of part 3...
- Page 15 第四部份 同步錄影功能 Part 4. Recording two programs in same channel 1. 新的軟體可以在同一頻道錄影兩個節目兼且收看第 3 個電視台. 在想錄影的 電視節目中, 你可以按遙控器上的 “REC” 或 “PICTURE” 鍵,進行即時錄影, 在錄影進行時, 錄影時間提示將會消失, 如要檢視已錄影時間, 可按遙控器 上的 “INFO” 鍵. The new firmware can record two programs and view the 3 program in the same channel at the same time.
- Page 16 Spectrum 22: TVB Jade, aTV, TVB Pearl, aTV world Spectrum 35: HD Jade, Interactive Information Channel, J2 Spectrum 37: aTV HDTV, CCTV4, Plus TV, Her TV, His TV, aTV News & Business channel 第四部份完 The end of part 4...
- Page 17 第五部份. 播放錄影片段方法 Part5. Play the recorded program 打開硬碟機內的檔案管理, 螢幕將會顯示節目的影像及名稱, 運用按遙控器上的 方向鍵, 選擇想重播的節目, 按 “INFO” 鍵,會顯示節目的名稱, 錄影日期及錄 影開始時間. 按 “ENTER” 即可播放. Open the Video under Select Device, the image and the name of the program will be display on screen. Select the desired play program by the navigator on remote. You can press “INFO”...
- Page 18 在播放的途中, 按 “FWD” 可以以 1 倍, 2 倍, 4 倍, 8 倍, 16 倍或 32 倍速播放, 32 倍速後便會回到 1 倍速. Press “FWD” on remote you can fast forward by 1x, 2x, 4x, 8x, 16x, 32x times speed. The program will play in 1x (normal) speed after 32x times speed. 記憶播放功能...
- Page 19 錄影,播放同步 第六部份. 時差錄影: Part6. Time shift 時間切換 – 當節目播放時按遙控器上的綠色鍵, 可進行時間切換, 你可以重温 較早前的片段, 而不會影響正在播放的節目. 例如, 在播放 11:00pm 節目時, 按 綠色鍵啓動時間切換, 當節目繼續播放例如到 11:15pm 時, 你可以按 “RWD” 回 到較早的片段. 當回到想播放的時段, 按 “PLAY” 即可繼續播放. 停止此功能 只要按 “STOP” 即可. Time shifting function – while the program is broadcasting, press the green button on the remote to operate the time shifting function.