Table of Contents
Advertisement
6. If you cannot easily insert the card, do not use force because this can bend
and damage the contact springs to the socket connector. Instead, remove the
card and try to insert it again.
7. After you have inserted the hardware, tighten the card retaining bracket firmly
onto the back of the computer.
8. Now put the cover back onto your computer and reconnect the peripherals and
the power supply.
III. Connecting the Remote Control Receiver Cable
1. In order to install the remote control device, insert the receiver cable of the
remote control into the remote control input of your hardware. During insertion,
note that although the jack needs to sit firmly in the socket, you should not
force the jack in as this may damage the socket.
2. Fasten the other end of the receiver cable to your monitor or the housing of
your computer by using the adhesive strip included in the delivery.
3. Insert the batteries into the remote control.
Make sure that the area between the remote control and the receiver is
unobstructed.
IV. Selecting the TV Connection Type
Option 1: Antenna (for digital/analog TV reception)
Connect coaxial cable from your rooftop aerial or an amplified indoor antenna to
your PCTV hardware input (Ant.).
For FM reception, connect the included FM antenna to your PCTV's FM antenna
input.
Image is a sample.
Image is a sample.
Advertisement
Table of Contents
