Related Manuals for PREMIER TECHNOLOGIES DVR 1800
Summary of Contents for PREMIER TECHNOLOGIES DVR 1800
-
Page 1: Operating Instructions
DVR 1800 Digital Voice Recorder INSTALLATION AND OPERATING INSTRUCTIONS PREMIER TECHNOLOGIES, INC. One Premier Drive P.O. Box 159 Long Lake, MN 55356 (800) 466-8642 • (612) 475-2317 FAX: (612) 475-3579... -
Page 2: Specifications
Important Before using the Premier DVR 1800 unit, please read this manual carefully. Specifications: Sample Rate: 64 kbps Minutes of Memory: Message length from 2 minutes to 47 minutes (model dependent). Flash Memory: Nonvolatile, stays unchanged. Recording Method: Remotely from any telephone or locally via cassette player. -
Page 3: Installation Instructions
• DVR can be configured to answer on 1 to 12 rings. (default is one ring) • A call counter keeps track of the number of incoming calls. • Two Models to Choose From –– DVR 1800 with handset jack gives you the flexibility to record locally from a tape player or the handset jack. -
Page 4: Local Recording
(Typically, the 600 and 8 ohm outputs are not used for normal operation.) 6. To decrease output volume, momentarily press the DOWN VOL button for a small decrease in volume. For a larger decrease in volume, press and hold the DOWN VOL button. DVR 1800 Installation and Operating Instructions... -
Page 5: Remote Operation
• DVR says “enter ring” and beeps 5. Press 6 to answer in six rings. • DVR says “ring is 6” and beeps 6. Press 4 to disconnect. • DVR will beep and then hang-up DVR 1800 Installation and Operating Instructions... -
Page 6: Program Menu Options
NOTE: The volume will change on the 8 and 600 ohm outputs only. The volume on the phone line will stay constant. This feature is typically not used on a DVR. DVR 1800 Installation and Operating Instructions... - Page 7 * equals 10 rings OPER 0 equals 11 rings # equals 12 rings • DVR announces the stored number of rings and beeps. The number of rings to answer has changed. DVR 1800 Installation and Operating Instructions...
- Page 8 • Press 0 to enable local control. OPER (This is the factory default setting.) – DVR says “local on” and enables the local up and down volume buttons. DVR beeps and returns to normal programming. DVR 1800 Installation and Operating Instructions...
- Page 9 DVR unit will be listening to volume adjustment signals only and not the played back audio production. Adjustment signals can not be “drowned out” by loud passages in the audio production.) DVR 1800 Installation and Operating Instructions...
- Page 10 (day, hr, hr, min, min, hr, hr ,min, min). This entry is organized as (day, start time, stop time). • The DVRT will say “E” for any day or time entries that are not valid. DVR 1800 Installation and Operating Instructions...
- Page 11 DVRT. Make sure to switch to auto mode when business closes or any after-hours calls will not be answer.) DVR 1800 Installation and Operating Instructions...
- Page 12 NOTES...
- Page 13 Dealer Service The network of authorized Premier Technologies dealers can provide service backed by Premier’s technical staff. For the name of your local dealer or for technical assistance from Premier Technologies, contact: Premier Technologies, Inc. One Premier Drive, P.O. Box 159, Long Lake, MN 55356 (612) 475-2317 •...
Need help?
Do you have a question about the DVR 1800 and is the answer not in the manual?
Questions and answers