“Administrator Account” or “Administrator privileges” are required to install the software It is essential to run the latest USB 3.0 drivers on your PC. Optilia’s recommended PC’s are equipped with Intel® USB 3.0 eXtensible Host Controller the up-to-date driver installations files can be found Intel’s Download Centre...
Installing the software and drivers 1. Install DesktopVideo_9.6.x.msi under Intensity Pro folder from the supplied CD. Click Next and follow the on screen instructions. 2. The drivers will now be installed on your system. A number of alerts will appear: “Do you want to allow the following program to install software on this computer?”...
Page 4
Connecting HD camera to frame grabber 4. Connect component Y/Pb/Pr video cables (green, blue, red) of the HD camera to the Y/Pb/Pr input of the frame grabber respectively. 5. Make sure that HD camera is connected to the power and switched on. 6.
Page 5
M20x-HD (US) To check the output format of the HD camera or changing the output format, please refer to the “Optilia HD Camera Control Software Manual”. 11. Set Output : All Outputs Active 12. Set Input : Component Video & Analog RCA Audio 13.
Page 6
Selecting the frame grabber in OptiPix 15. Run OptiPix. 16. Click Device->Input Device or icon and select “Blackmagic WDM Capture”. The live image should be visible in OptiPix. The input format of the frame grabber can also be changed in OptiPix if necessary.
Connect the PC always to the power. Disable any power saving options. Getting Help Please check first F.A.Q and Support Documents pages in Optilia homepage. It is recommended to go through the following checklist before contacting your local Optilia representative.
Page 8
Instrument´s systems. Optilia Instruments is not responsible for any use of this information for other purposes. Optilia Instruments shall not be liable to the purchaser of this product or third parties for damages, losses, costs or expenses incurred by the purchaser or third...