Range Shift Lever; 4-Wheel Drive Lever - Yanmar SC 2400 Operator's Manual

3. Start the engine.
Start the engine by referring to "7. OPERATING THE
ENGINE".
4. Select travel speed.

■ Range Shift Lever

Use the range shift lever to select the speed that best
suits the intended operation.
(A) Range shift lever
(a) SLOW : Used for heavy-load operation.
(b) FAST : Used for light-load operation.

■ 4-Wheel Drive Lever

In the 4-wheel drive mode, all the four wheels are
powered to obtain better traction on difficult-to-travel
ground.
The 4-wheel drive lever can be set to the ON or OFF
position only when the tractor is at a standstill.
(A) 4-wheel drive lever
(a) 4-wheel drive mode
(b) 2-wheel drive mode
IMPORTANT: Avoid damage.
●ALWAYS keep the 4-wheel drive lever in the OFF
position when traveling on a paved surface.
●ALWAYS disengage the 4-wheel drive lever when
not needed to prevent premature wear of the front
tires.
●NEVER install tire chains to the front wheels.
Chains will hit and can damage the tractor.
●If disengaging the 4-wheel drive lever is difficult,
stop the tractor, turn the steering wheel right and
left several times. Then attempt to disengage the
4-wheel drive lever again.
●To minimize tire wear, drive in the 4-wheel drive
mode only when absolutely necessary. Driving the
tractor on a paved road in the 4-wheel drive mode
can accelerate wear of the tires.
●To obtain better traction, keep the front tires at the
maximum allowable pressure.
●When the 4-wheel drive lever is in the ON position,
braking will apply to all four wheels.
Sc2400 Operator's Manual
Downloaded from www.Manualslib.com
8. OPERATING THE TRACTOR
Low traveling speed.
High traveling speed.
manuals search engine
(a)
3014919a
(A)
(a)
3014904b
8-4
(A)
(b)
(b)