Vox MS 984 Instruction Manual page 4

USING YoUR STICK BleNdeR
Note: The time running unit without load can't exceed 15s. Max operation duration under
high speed per time cannot exceed 1 minute. Minimum 10 minutes rest time shall be
maintained between two continuous cycles.
IMPoRTANT:
1. Ensure that the stick blender is unplugged from the power outlet before assembling or
removing attachments.
2. Do not use the appliance to mix the hot soup as the plastic shaft may be melt.
INSTRUCTIoN FoR BleNdeR
1. To assemble the detachable shaft with the motor unit, turn the shaft anti-clockwise
direction until tightened. To disassemble, just turn in the adverse direction.
2. Simply plug the stick blender to power outlet.
3. Lower the stick blender into food and depress the switch at the top of the motor unit.
4. To stop the stick blender take your fingers off the switch button.
INSTRUCTIoN FoR CHoPPeR
1. Place the chopper bowl on a clean, level surface.
2. Assemble the stainless steel blade into the chopper bowl, as shown in Fig 1.
3. Place food into the chopper bowl.
4. Attach the Lid onto the chopper bowl and turn it in clockwise direction until it locks into
position (see Fig.2). To detach the lid, turn in adverse direction.
5. Insert the top part of the chopper into the hole of the chopper lid, and turn in clockwise
direction to lock (See Fig 3).
6. Plug the appliance to power outlet and depress the switch to begin operation.
7. To stop the appliance, take your fingers off the switch button.
CAUTIoN:
– To reduce the risk of injury, never place cutting blade on base without first putting bowl
properly in place.
– Be sure chopper lid is securely locked in place before operating appliance.
4