Basx Mc-700 Rear Panel - Emotiva MC-700 User Manual

BasX MC-700 Surround Sound Processor

BasX MC-700 Rear Panel

MC-700
7.1 ANALOG OUTPUTS
SUB LF LS C LBS
RF RS SW RBS
4 5 6
1. HDMI Video Outputs
HDMI Output #1 is the main video output, and supports ARC (Audio Return Channel) and
commercial 4k UHD video signals. HDMI Output #2 allows you to connect a secondary HDMI
video display.
2. HDMI Video Inputs
The MC-700 allows you to connect up to six HDMI video source devices. HDMI Input #1 through
HDMI Input #3 should be used for commercial 4k UHD video sources like 4k UHD Blu-Ray players
and satellite boxes; HDMI Input #4 through HDMI Input #6 should be used for HD video sources
and non-commercial 4k video content.
3. AC Power Switch
Switches the main AC power to the MC-700 On and Off. When this switch is Off, no controls
operate (the MC-700 power amp cannot be turned On from the front panel or remote control).
4. Balanced Subwoofer Output
The balanced and unbalanced subwoofer outputs on the MC-700 both carry the same LFE signal.
If your subwoofer has both types of inputs, we recommend the balanced connection, which has
better immunity to hum and noise - especially if you have very long cables.
5. 7.1 Channel Analog Outputs
These are the main audio outputs on the BasX MC-700. Connect them to the unbalanced analog
audio inputs on your power amp or power amps and the input on your powered subwoofer.
1
HDMI OUTPUTS
ANALOG INPUTS
CH1 CH2
2 1
L
COAX
MIC
R
OPT DIGITAL INPUTS
7 8
2
HDMI INPUTS
1 2 3 4
USB IR RS232 TRIGGER
OUT
UPDATE PC IN OUT
9 10 11 12
Page 9
3
POWER
5 6
13 14