V Angle (VANG), V Bow (VBOW), Upper pin
(UPIN) and Low Pin (LPIN) Adjustments
1. Input a crosshatch signal.
2. Activate the Service Adjustment Mode.
3. Select VANG, VBOW, UPIN, and LPIN with
4. Adjust with
and
for the best picture.
5. Press
then
V ANGLE (VANG)
V BOW (VBOW)
UPPER PIN (UPIN)
LOW PIN (LPIN)
Service Adjustment Mode Memory
1. Change the value of the DCOL item to 1.
2. After completing all adjustments, press
Read From Memory
SERVICE
READ
and
.
to save into the memory.
then
.
Green
0
Red
ENTER
— 27 —
KV-24FV10/25FV10/25FV10C