Advertisement
3.5mm audio cable into AUX IN slot on the machine, and the other end is
connecting with other audio source and playing.
Setting the Time
1. Press and hold the
setting is: set time/set date. Use the
down. Then, use the
setting choice for each section (Hour, minute, day, month, etc.). After you are done
confirmingthe settings of your time/date, it will prompt you that thetime was
saved and automatically exit.
2. Press the
3. When the unit is on standby, it will only display the time (cannot adjust the
time).
Setting your Alarm
To set your alarm, press and holdthe alarm button until the next screen pops up:
Alarm setup 1/Alarm setup 2. During the setup process, usethe
button to make changes. Press the
through the time until you have reached your desired alarm time setting; press
to confirm your choice. Cycle through the next option by using the
and choose Once or Daily with the
desired date of your alarm (if it is a one-time alarm). Repeat the above process of
changing and confirming settings for this step. Once this is confirmed, you must
choose the desired volume of your alarm by cycling through with the
buttons. When you have confirmed all settings, make sure to choose "Alarm On."
Once this is done, confirm the alarm setting with the
prompted with Alarm Saved. When the alarm is ringing, press the
close/stop the alarm.
Battery Display
When you plug in the DC power, the built-in battery will charge.When charging, the
LCD display will show the charge status of battery if you press and hold the MODE
button to enter the time setting menu.The order of
button to confirm. You will need to confirm your
button to check the current time while playing media.
button for up and the
button to confirm all choices. Scroll
button. After that, you must set the
button and you will be
button for
or
or
or
button to
Advertisement
