SLC PIX BAR PRO Quad 12 User Manual

Caution: For your safety, please read this user manual carefully before initial use!
DISCLAIMER: Stage Light Company known as SLC in this document believes that the information
contained in this manual is accurate in all respects. SLC assumes no responsibility for any errors or
omissions in this documents. SLC reserves the right to revise and make changes to the content of this
document without obligation that SLC notify any person or company of such revision or changes. This
does not in any way constitute a commitment by SLC to make such changes. SLC may issue a revision of
this manual or a new edition to incorporate such changes.
1. Starting Up
What Is Included

1 x PIX BAR PRO Quad 12 RGBW Professional LED BAR

1 x powerCON Cable
Opening the Box
Thank you for purchasing one of our quality PIX BAR PRO fixtures. Featuring professional power and
data connectors, we hope you enjoy our top of the line product. When you open the box for the first
time be sure to unpack carefully. Check the box to ensure all of the contents are there. If anything
appears to be damaged through transit, notify the shipper immediately and keep the packing material for
inspection. You generally have 7 days to do so. If for any reason, the fixture needs to be returned,
please save the packing material as it is important that it be returned in the original factory box.
Contacting Us
If you need to contact us for any reason, please do not hesitate!
For a fast response please contact us via e-mail at contact@stagelightcompany.com.
Author:
L. Howard
Safety Instructions

DO NOT open this device, there are no user-serviceable parts inside

DO NOT look at the light source when the device is on

CAUTION: This unit's housing may be hot when lights are operating

DO NOT leave any flammable material within 1.5 ft of this unit while operating or connected
to power

DO NOT operate this device outdoors or in location where dust, excessive heat, water, or
humidity may affect it

DO NOT connect this device to a dimmer or rheostat

ONLY connect this device to a grounded and protected circuit using provided cable

Use a safety cable when mounting this device overhead
PIX BAR PRO Quad 12
PIX BAR PRO Quad 12
User Manual
Date:
02/17/2014
P a g e
Edited:
L. Howard
| 1
Date:
03/20/2015
Stage Light Company, LLC
© 2014