Charging The Battery - Silvercrest stbd 6 a1 Operating Instructions Manual

Returning the packaging to the material cycle
conserves raw materials and reduces the amount of
waste which is generated. Dispose of packaging
materials that are no longer needed in accordance
with applicable local regulations.

Charging the battery

Before using the keyboard, the integrated battery must be
completely charged.
♦ Connect the USB plug of the charging cable
a USB power supply.
♦ Connect the micro USB plug of the charging cable to the
charging socket
lights up red and the battery charges.
When charging is complete, the charging LED
NOTE
► The maximum charging time is approx. 3 hours.
► If the charging LED
is low and needs to be charged.
► If you connect the powered-on keyboard to a PC, the
message "USB device not recognised" appears. This is not
a malfunction as the keyboard is designed only for tablets
and smartphones and cannot be used with a PC.
STBS 6 A1
on the keyboard. The operating LED
starts flashing constantly, the battery
to a PC or to
goes out.
11
GB
IE