Insignia NS-MB10400 Quick Setup Manual

Quick Setup Guide |
PACKAGE CONTENTS
• Mobile battery pack
• Micro USB Charging/Sync cable
• Quick Setup Guide
SAFETY INFORMATION/CAUTION
• Do not expose your mobile battery pack to heat, fire, or water.
• Do not modify, disassemble, open, drop, crush, puncture, or
shred the internal battery.
• This is not a toy. Young children should be supervised to
make sure that they do not play with the mobile battery.
• Do not charge electronic devices while the battery pack is
recharging.
• Recharge the mobile battery before use if it has not been
used for more than 90 days.
• Risk of fires and burns. Do not open, crush, heat above
140°F (60°C), or incinerate. Follow the manufacturer's
instructions.
• Operation environment temperature: 32~104°F (0~40°C).
This product is safe for regular use under normal conditions.
As with any device using electrical power, some situations
may be unsafe and injuries or damages could result. To
minimize or avoid unsafe conditions, read and follow the
instructions before using.
Before using your new product, please read these instructions to prevent any damage.
NS-MB10400 / NS-MB15600 / NS-MB20800 /NS-MB10400-C / NS-MB15600-C / NS-MB20800-C
FEATURES
LEDs
NS-MB10400
NS-MB15600
Micro USB Output 4.2A total Battery indicator button
Input
input
USB output
CHARGING YOUR MOBILE BATTERY
Note: Fully charge your mobile battery before using it for the first
time.
Output 4.2A total
Input
1 Plug the small end of the included USB cable into the
battery pack's micro USB port (input).
2 Plug the large end of the USB cable (included) into a
standard USB port on your computer, vehicle
charger, or wall charger (not included).
The LEDs light indicating the battery level, and the
battery pack begins charging.
Note: The battery pack is fully charged when all four LEDs light.
CHARGING YOUR ELECTRONIC DEVICE
NS-MB20800
1 Plug the large end of the USB cable into one of the
battery pack's USB output ports.
2 Plug the small end of the USB cable into your device.
The battery pack automatically begins charging
your device. Recharge the battery pack when the
OR
LED starts blinking.
Notes:
• If your device requires a different connector than the one
provided, use the cable that came with your device.
• If you connect more than one USB device, 4.2A power is
shared between the ports. If your device does not charge
fast enough, disconnect the other USB device(s).
Mobile Battery Pack
Output 4.2A total
Input
OR