Summary of Contents for E-Films E-MCR
- Page 1 E-FILMS USER GUIDE: e-MCR (Multi Card Reader) _____________________________________________________________________________________________ USER GUIDE e-MCR (Multi Card Reader) E-FILMS | 2009...
- Page 2 E-FILMS USER GUIDE: e-MCR (Multi Card Reader) _____________________________________________________________________________________________ Using E-Films e-MCR (Multi Card Reader) The e-MCR is specifically designed to allow you to download the content of up to 4 card adaptors simultaneously. This saves you valuable time when ingesting multiple recordings after filming a production.
- Page 3 E-FILMS USER GUIDE: e-MCR (Multi Card Reader) _____________________________________________________________________________________________ Step 2: Load Shotput Pro software Step 3: Insert card adaptors Check and verify results Log Data Added: 7/28/2009 6:11:38 PM ShotPut Pro: Begin Offload Process 7/28/2009 6:11:23 PM ShotPut Pro: Begin transfer of 9 files...
- Page 4 E-FILMS USER GUIDE: e-MCR (Multi Card Reader) _____________________________________________________________________________________________ Erasing adaptor cards ready for next use Either use the Shotput Pro to clear the cards by setting the flag in the Settings screen, or you can do it manually. We recommend that clearing be done manually until you are confident in how the software works, this will avoid any accidental erasure.
- Page 5 E-FILMS USER GUIDE: e-MCR (Multi Card Reader) _____________________________________________________________________________________________ The next option to set is which locations the files are going to be copied to, and where the files are coming from. In this case we are making copies of cards that are in Drives H: I: K: and M:. They are being copied to Local Drive E:, Local Drive F: and the Network directory CLIENTS.
- Page 6 E-FILMS USER GUIDE: e-MCR (Multi Card Reader) _____________________________________________________________________________________________ Once this is set you can go back to the “Manual Offloading”tab and click “Begin Offload”. E-FILMS | 2009...
- Page 7 If you select the “Automatic Offload” tab, the software waits for a card to be inserted and will start the copy process without you needing to intervene. As new cards are added copying will automatically begin for all devices connected to the e-MCR. E-FILMS | 2009...
- Page 8 E-FILMS USER GUIDE: e-MCR (Multi Card Reader) _____________________________________________________________________________________________ Once a card has been copied it may be replaced with another, or you can wait until all cards are copied. Then when all copying has been completed, you can check the logs for accuracy in copying, and clear the cards.